November 1, 201510 yr No issue at my end I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
November 1, 201510 yr Since the update I find I have no livery change function? I'm going to speculate that you made the same mistake I did. I am using the 737 in P3Dv2.5 and wanted to keep it there for awhile until the addons for P3Dv3 had matured in their debugging process. The other day I went into the operations center and it said an update was available so I had it update. Afterwards all of my operation center functions were gone. After reading the NGX P3Dv3 update thread it appears that if you have P3Dv3 installed on your computer along with v2.5, all the new installs will go into v3. My NGX still works fine in P3Dv2.5, but apparently the operations center thinks the NGX is in v3. To correct it, it looks like I will need to remove P3Dv3 and do a repair/reinstall of the operations center and or NGX into P3dv2.5 and then reinstall P3Dv3. If anyone knows of a simpler way of correcting this, please let us know. Thanks, Theodore Striker II [email protected] ghz, Noctua C12P CPU air cooler, Asus Z77, 2 x 4gb DDR3 Corsair 2200 mhz cl 9, EVGA 1080ti, Sony 55" 900E TV 3840 x 2160, Windows 7-64, FSX, P3dv3, P3dv4
November 3, 201510 yr Author I'm going to speculate that you made the same mistake I did. I am using the 737 in P3Dv2.5 and wanted to keep it there for awhile until the addons for P3Dv3 had matured in their debugging process. The other day I went into the operations center and it said an update was available so I had it update. Afterwards all of my operation center functions were gone. After reading the NGX P3Dv3 update thread it appears that if you have P3Dv3 installed on your computer along with v2.5, all the new installs will go into v3. My NGX still works fine in P3Dv2.5, but apparently the operations center thinks the NGX is in v3. To correct it, it looks like I will need to remove P3Dv3 and do a repair/reinstall of the operations center and or NGX into P3dv2.5 and then reinstall P3Dv3. If anyone knows of a simpler way of correcting this, please let us know. Thanks, Theodore Striker II Thanks for responding Theodore. No I am still saving up for V.3 and am still running 2.5. Thanks for your reply. Dave Taylor
November 3, 201510 yr I'm going to speculate that you made the same mistake I did. I am using the 737 in P3Dv2.5 and wanted to keep it there for awhile until the addons for P3Dv3 had matured in their debugging process. The other day I went into the operations center and it said an update was available so I had it update. Afterwards all of my operation center functions were gone. After reading the NGX P3Dv3 update thread it appears that if you have P3Dv3 installed on your computer along with v2.5, all the new installs will go into v3. My NGX still works fine in P3Dv2.5, but apparently the operations center thinks the NGX is in v3. To correct it, it looks like I will need to remove P3Dv3 and do a repair/reinstall of the operations center and or NGX into P3dv2.5 and then reinstall P3Dv3. If anyone knows of a simpler way of correcting this, please let us know. Thanks, Theodore Striker II I believe what is happening is that PMDG was not going to support both sims installed at the same time, which harkens a recent thread here at PMDG support forum, which Kyle and I believe Robert R commented on to clarify. If you want both sims on your system, that is fine but if you want a PMDG aircraft to fly, it'll resort to v3. Instead of uninstalling your sims, just uninstall the PMDG aircraft and reinstall, so everything is kosher. I think you may be left deciding what is more important to you...just a thought. -Jim EDIT: Refer to this thread, which is a pinned topic in this general forum: http://www.avsim.com/topic/475671-01oct15-prepar3d-v2v3-compatible-installers-available/ Edited November 3, 201510 yr by jmorvay1971 Engage, research, inform and make your posts count! -Jim Morvay Origin EON-17SLX - Under the hood: Intel Core i7 7700K at 4.2GHz (Base) 4.6GHz (overclock), nVidia GeForce GTX-1080 Pascal w/8gb vram, 32gb (2x16) Crucial 2400mhz RAM, 3840 x 2160 17.3" IPS w/G-SYNC, Samsung 950 EVO 256GB PCIe m.2 SSD (Primary), Samsung 850 EVO 500gb M.2 (Sim Drive), MS Windows 10 Professional 64-Bit
November 3, 201510 yr Author Kyle, can you help me please? I am running the NGX in P3D v2.5 and have no textures or documents in my Operations Centre? Dave Taylor
November 3, 201510 yr Commercial Member Kyle, can you help me please? I am running the NGX in P3D v2.5 and have no textures or documents in my Operations Centre? Any official support requests should go through the official system. Despite my presence here on the forum, I can't get access to our ticketing system that contains all of the resources to help people while at the day job (yay webfilters!), so there's a strong likelihood that someone else will be able to get to you a lot earlier than I could. Kyle Rodgers
Create an account or sign in to comment