Hello!

 

have updated to 2.1 an purchased the Global Pack.

 

I have done 2 Flights with the new Asia FO:

 

After Start Checklist:

The FO did not say "Mainbustie"

 

when reach transition alt and i press the button for this,

the FO did say 2 times "set crosschecked"  why he say it  2 times?

 

When landed my FO did not controls my landing lights off. i have to do it myself.

changelog say, that FO should do this:

2. FO Controls Exterior Lights After Landing Flow.  Implemented by user request as some users wanted the FO to control the lights after landing. 

 

 

 

When landed my FO did not controls my landing lights off. i have to do it myself.

 

Hello, 

 

You must go to the config menu and select the option to allow the FO to manage the exterior lights.

 

 

After Start Checklist:
The FO did not say "Mainbustie"
 
when reach transition alt and i press the button for this,
the FO did say 2 times "set crosschecked"  why he say it  2 times?

 

 

1. Asia voice.  Thanks for the report.  There's a typo in the sound file name in the Asian voice set for Main Bus tie.  I just fixed it.

 

2. Set and Cross Checked.  I'm not sure how you're doing that.  Does that only happen with the Asian voice set?  What about the other voice sets?

Hello, the 2 times crosscheck on transition while climbing comes also in other sound sets.

but in descend its ok. 

 

@ Romain: thanks for this information how to set this with landing lights for FO.

but can not find this in the manual

 

sorry for "no quote" but quote did not work on my ipad and chrome.

Hello, the 2 times crosscheck on transition while climbing comes also in other sound sets.

but in descend its ok. 

 

@ Romain: thanks for this information how to set this with landing lights for FO.

but can not find this in the manual

 

sorry for "no quote" but quote did not work on my ipad and chrome.

 

 

Press the CFG button on the FS2Crew Main Panel.  Press it over and over again until you see the relevant option.  Then use the little arrow buttons to select YES or NO.

 

As for set and cross check, I can't reproduce that.

 

What Transition Altitude are you using?

 

 

After Start Checklist:
The FO did not say "Mainbustie"

 

I just updated the 2.1 main installer to fix this issue with the Asian voice set.

 

If you use the Asian voice set, please re-download 2.1 via your FS2Crew account.

 

As it was such a small change, I didn't bother changing the version number.

 

Best,

 

 

As for set and cross check, I can't reproduce that.

 

I have tested at different altitudes between 5000 and 18000 but cannot reproduce it either.

Hello,

i have download again V2.1 and installed.

I now flying a short trip over the new NA-LC from Orbx.

going from Miami to Tampa. 

Have reached 18000 , set all altimeters to 2992 and press the Button for transition.

The FO (Have US2 now) calls back: "set crosscheck". and again  "set crosscheck".  

 

mainbustie is OK now in after start check.

Are you following the manual to the letter?

 

I'm not sure how you're doing that.

 

Cheers,

 

 

Have reached 18000 , set all altimeters to 2992 and press the Button for transition.
The FO (Have US2 now) calls back: "set crosscheck". and again  "set crosscheck".

 

What state is Fs2crew when you press the sec button for the transition altitude?

Does the FO say "2992 set crosscheck set crosscheck" or "2992 set crosscheck... 2992 set crosscheck"?

What state is Fs2crew when you press the sec button for the transition altitude?

Does the FO say "2992 set crosscheck set crosscheck" or "2992 set crosscheck... 2992 set crosscheck"?

 

Hi, Captain says 1013

Fo says "set crosscheck, set crosscheck"

So It happens with both the AS and US2 voice both at 18000ft, right?

 

What is displayed on the main bar when it occurs, "Descent"?

Hi,

this happens to me in all voices. if in US its 18000  or 5000ft  like in Europe.

In the Dash is no "fix" transition to set in FS2Crew. 

 

The main bar displays for the first button "SET CRUSE POWER" 

When i reach cruise alt then i press this.

After then,   the next is "XFILL FMS"

then comes DES CHK TO LINE.

 

 

In the Dash is no "fix" transition to set in FS2Crew. 

 

I know, but I try to reproduce the flight in the exact same conditions as yours because otherwise, I don't get the issue you have. So I try to find a very particular situation that could trigger this.

So to sum up, it occurs when you have reached 18000ft and you press the secondary button to tell that you have set the baro to 2992/1013 correct? So I guess you have completed the climb checklist below the line before you press the secondary button?

 

And by the way, an idea has just crossed my mind: your Dash is configured with baro in hPA or In? 

I know, but I try to reproduce the flight in the exact same conditions as yours because otherwise, I don't get the issue you have. So I try to find a very particular situation that could trigger this.

 

So to sum up, it occurs when you have reached 18000ft and you press the secondary button to tell that you have set the baro to 2992/1013 correct? So I guess you have completed the climb checklist below the line before you press the secondary button?

 

And by the way, an idea has just crossed my mind: your Dash is configured with baro in hPA or In? 

hi,  that is correkt you say.

at reaching transition alt, i set the Baro to 1013 and press the sec. Button for transition.

the climb check is complete before.

and Yes: my dash is conigured in Kg and hPa.

and my P3D is configured in hybrid: Feet with millibars.