Jump to content
Sign in to follow this  
Rimshot

Flight1 GNS

Recommended Posts

A2A Piper Comanche 250

[Window Titles]
Window00=Main panel
Window01=Clipboard
Window02=Mini controls
Window03=Payload and fuel manager
Window04=XGauge
Window05=Map
Window06=Quick radios
Window07=Maintenance hangar
Window08=Pre-flight inspection
Window09=AFK
Window10=none2    
Window11=dbg
Window12=none3
Window13=none4
Window14=gps295
Window15=gns400

[VIEWS]
VIEW_FORWARD_WINDOWS=10,20,RADIO_STACK_PANEL,FUEL_PANEL,40,50,51,52,53,54,100,101,102,103,104,105

//--------------------------------------------------------
[Window00]
Background_color=0,0,0
size_mm=1024,768
position=1
visible=0
ident=10

//gauge00=tester!tester, 420, 50, 400, 1000         //Comment for release

[Window01]
Background_color=0,0,0
size_mm=322,615
pixel_size=322,615
window_pos= 0.0, 0.2      
position=0
visible=0
ident=20
sizable=0

gauge00=A2A_PA24!clipboard,  1,0,322,615

[Window02]
Background_color=0,0,0
size_mm=392,315
pixel_size=392,315
window_pos= 0.51, 0.2      
position=0
visible=0
ident=RADIO_STACK_PANEL
sizable=0

gauge00=A2A_PA24!controls,   1,0,392,315

[Window03]
Background_color=0,0,0
size_mm=649,689
pixel_size=649,689
window_pos= 0.51, 0.2      
position=1
visible=1
ident=FUEL_PANEL
sizable=0

gauge00=A2A_PA24!manager,  1,0,649,689


[Window04]
size_mm=659,489
windowsize_ratio=0.4
position = 5
Visible = 0
ident = 14991
zorder = 100

gauge00=XGauge!WeatherMap,0,0,659,489


[Window05]
Background_color=0,0,0
size_mm=1024,768
pixel_size=1024,768
window_pos= 0.000, 0.2
position=0
visible=1
ident=40
sizable=0

gauge00=A2A_PA24!mapscreen,  255,1,770,766
gauge01=A2A_PA24!map_settings,  1,50,246,232

[Window06]
Background_color=0,0,0
size_mm=187,392
pixel_size=187,392
position=6
window_pos= 0.025, 0.9
visible=1
ident=50
sizable=0

gauge00=A2A_PA24!radios,  1,0,

[Window07]
Background_color=0,0,0
size_mm=1024,768
pixel_size=1024,768
window_pos= 0.000, 0.2
position=0
visible=0
ident=51
sizable=0

gauge00=A2A_PA24!maint_hangar,  1,0,1024,768


[Window08]
Background_color=0,0,0
size_mm=1024,768
pixel_size=1024,768
window_pos= 0.000, 0.2
position=0
visible=0
ident=53
sizable=0
nomenu=1
type=special

gauge00=A2A_PA24!walkaround,  0,0,1024,768

[Window09]
Background_color=0,0,0
size_mm=321,321
pixel_size=321,321
position=5
visible=1
ident=54
sizable=0

gauge00=A2A_PA24!afk,  1,1,321,321


[Window10]
Background_color=0,0,0
ident=100
render_3d_window=1
nomenu=1
type=special

gauge00=A2A_PA24!keys,  1,1,1,1
//gauge01=A2A_PA24!cockpitBuilder, 2,2,2,2     //For cockpit builders only.

[Window11]
Background_color=0,0,0
size_mm=330,450
pixel_size=330,450
position=5
visible=0
nomenu=1
ident=101
sizable=0

//gauge00=dbg!panel,  144,0         //Comment for release

[Window12]
Background_color=1,1,1
ident=102
window_size=1.000,1.000
nomenu=1
zorder=100

gauge00=A2A_PA24!blackout,  0,0

[Window13]
Background_color=0,0,0
size_mm=650,624
pixel_size=650,624
position=3
visible=0
ident=103
nomenu=1
zorder=99

gauge00=A2A_PA24!engine_details,  1,1,650,624

[Window14]
Background_color=0,0,0
size_mm=420,255
position=8
visible=0
ident=104
sizable=0
nomenu=1
type=special

gauge00=gps!gpsmap_295,        0,0,420,255        
gauge01=gps!gps_295,        45,74,300,215        

[Window15]
Background_color=0,0,0
size_mm=420,217
position=6
visible=0
ident=105
sizable=0
nomenu=1
type=special

gauge00=gps!gns_400,        0,0,420,217        
gauge01=gps!gps_500,        103,27,310,225            

//--------------------------------------------------------
[Vcockpit00]
Background_color=0,0,0
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$reticle

gauge01=A2A_PA24!code_pa24_r, 1,1,1,1
gauge02=A2A_PA24!status1,2,2,2,2
gauge03=A2A_PA24!damage,    3,3,3,3
gauge04=accusim_xml!code_s,    4,4,4,4
gauge05=A2A_Accusim!lua,    5,5,5,5
gauge06=A2A_Accusim!AVS,    6,6,6,6
gauge07=A2A_Accusim!events,    7,7,7,7
gauge08=A2A_Accusim!random,    8,8,8,8
gauge09=A2A_Accusim!storage,    9,9,9,9
gauge10=A2A_PA24!code_pa24_m, 1,1,1,1
gauge11=gps!gps_500,    0, 0, 1065, 675
gauge12=A2A_PA24!number, 779, 502, 240, 67
gauge13=Comanche!avionics, 0, 576, 1024,447  //AVIONICS DLL

[Vcockpit01]
Background_color=0,0,0
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$gauges_lm

gauge00=Comanche_Illumination!gauges_lm, 0, 0, 1024, 1024

[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$radiostack_lm

gauge00=Comanche_Illumination!radiostack_lm, 0, 0, 1024, 1024

[Default View]
X=0
Y=0
SIZE_X=8191
SIZE_Y=6143
 

 

Thank you, barrel_owl!

 

Volker

Share this post


Link to post

Unfortunately, I do not have the A2A Piper Comanche 250, however I assume it should work as the A2A Cessna 182.

 

In such case, first please open your A2A configurator, select GPS, then select Reality XP. Finally, run the Flight1 Configurator. It should identify the Reality XP gauge installed into your Piper. Click on Replace Reality XP and exit, then paste your panel.cfg here again.

One remark. From your current panel, I assume you have choosen the configuration with 2 gauges:

gauge00=gps!gns_400,        0,0,420,217        
gauge01=gps!gps_500,        103,27,310,225

 

Did you buy both gauges from Flight1 or only the GNS530? This is important.

Share this post


Link to post

I made a test with my A2A Cessna 182 Skylane, where I previously had the the GTN750 installed.
I used the A2A configurator to remove the GTN and install the Reality XP GNS 500 gauge. Then I ran the Flight1 configurator to replace the (fake) Reality XP GNS 500 with the Flight1 gauge.

The process ran smooth. Looking at the final panel.cfg, I noticed that the Flight1 configurator had correctly changed the previous "Ident=" number with "15531". So, no manual tweak was needed.

With Carenado gauges this process is not yet completely automatic, but Tiberiu from Flight1 assured me this morning their next update will solve this.

Share this post


Link to post

Not sure this question has been asked. Can a F1 GTN and a F1 GNS coexist in the same panel?  i.e. one GTN750 and one GNS430.....


Frank Patton
MasterCase Pro H500M; MSI Z490 WiFi MOB; i7 10700k 3.8 Ghz; Gigabyte RTX 3080 12gb OC; H100i Pro liquid cooler; 32GB DDR4 3600;  Gold RMX850X PSU;
ASUS 
VG289 4K 27" Monitor; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener.  
Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126
                       
"I will never put my name on a product that does not have in it the best that is in me." - John Deere

Share this post


Link to post

Not sure this question has been asked. Can a F1 GTN and a F1 GNS coexist in the same panel?  i.e. one GTN750 and one GNS430.....

 

Why not?


Bert

Share this post


Link to post

Just asked because that could not be done previously. RXP GNS and F1 GTN in same panel.


Frank Patton
MasterCase Pro H500M; MSI Z490 WiFi MOB; i7 10700k 3.8 Ghz; Gigabyte RTX 3080 12gb OC; H100i Pro liquid cooler; 32GB DDR4 3600;  Gold RMX850X PSU;
ASUS 
VG289 4K 27" Monitor; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener.  
Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126
                       
"I will never put my name on a product that does not have in it the best that is in me." - John Deere

Share this post


Link to post

Not sure this question has been asked. Can a F1 GTN and a F1 GNS coexist in the same panel?  i.e. one GTN750 and one GNS430.....

 

Of course they can. Just as two units of the same kind (GTN750+ GTN750/650) already coexist within the same VC.

Problem is: what is this for as long as we have no crossfill?

Share this post


Link to post

 

 


Problem is: what is this for as long as we have no crossfill?

 

+1


Frank Patton
MasterCase Pro H500M; MSI Z490 WiFi MOB; i7 10700k 3.8 Ghz; Gigabyte RTX 3080 12gb OC; H100i Pro liquid cooler; 32GB DDR4 3600;  Gold RMX850X PSU;
ASUS 
VG289 4K 27" Monitor; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener.  
Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126
                       
"I will never put my name on a product that does not have in it the best that is in me." - John Deere

Share this post


Link to post

RXP and F1 do not mix well... but you can still do it if you ignore the error message and know which one drives the autopilot.


Bert

Share this post


Link to post

If anyone interested i I installed F1 GNS 430 in all my A2A aircraft (C172, C182, PA28, PA24, T-6) using few simple steps

 

1. In P3D for each A2A aircraft back up your panel.cfg. Make a copy of panel*RXP430*.cfg, then rename it to panel.cfg.

2. Run F1 app, after scanning it will see all aircraft with RXP 430. Press "replace RXP" button. Enjoy F1 GNS 430

  • Upvote 1

flight sim addict, airplane owner, CFI

Share this post


Link to post

If anyone interested i I installed F1 GNS 430 in all my A2A aircraft (C172, C182, PA28, PA24, T-6) using few simple steps

 

1. In P3D for each A2A aircraft back up your panel.cfg. Make a copy of panel*RXP430*.cfg, then rename it to panel.cfg.

2. Run F1 app, after scanning it will see all aircraft with RXP 430. Press "replace RXP" button. Enjoy F1 GNS 430

I confirm it works here as well.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...