February 20, 20188 yr Good afternoon! I seem to have an isue with the brakes constantly being applied (Not parking brake). I have the CH Pro Rudder Pedals and have (re)calibrated and checked null zones, however they still seem to be on causing the brakes to burn and take off rolls to be miles long. I have tired with other aircraft, PMDG, default etc and the brakes are fine. Has anyone else experienced this? Thanks in advance, James
February 20, 20188 yr Good afternoon, I have the same problem in FSX. When I use the Brakes of my Saitek Rudder Peddals the brakes don't release anymore and the aircraft is unable to move. I checked everything and couldn't find a solution. Even loading a new aircraft state doesn't change anything. I've never had this problem with any of my other aircrafts before. It would be great if there was a quick solution because I really look forward to fly this amazing aircraft. Thank you.
February 20, 20188 yr Ditto here. She is stuck firmly to the ground. Useless. Tried uninstalling and reinstalling. No change. I also have the Saitek gear/FSX. Tried different airports with no change. Definite bug.
February 20, 20188 yr Author Absolute pain in the backside. Also I have ZERO flightdeck lighting, except Flood Light
February 20, 20188 yr Have you guys checked if you need to invert your brake axis? The brakes work fine on my side. @captjames have you installed RealLight? ,
February 20, 20188 yr Author 12 minutes ago, Ephedrin said: Have you guys checked if you need to invert your brake axis? The brakes work fine on my side. @captjames have you installed RealLight? I have checked the axis and they're fine! And yes I have....unfortunately.
February 20, 20188 yr 45 minutes ago, Ephedrin said: Have you guys checked if you need to invert your brake axis? The brakes work fine on my side. @captjames have you installed RealLight? Yes. My brake axis is normally inverted for every aircraft I own. Good try though Ephedrin
February 20, 20188 yr Huh Oh! Was going to pick this up quick but better wait and watch now. Vic green
February 20, 20188 yr Same issues on the FSX side. Tried with the reverse axis checked and unchecked for the brakes and nothing changes. Awaiting a fix or instructions...... Colin...
February 20, 20188 yr Hello all: Is there anyone out here running FSX who are NOT seeing locked brakes? Thanks
February 21, 20188 yr My brakes lock as well. As soon as I apply them, they lock up. And the parking break won't engage.
February 21, 20188 yr I have the same issue with FSX. Tried all the suggestions made so far and nothing works.
February 21, 20188 yr One question I'll pose, as I do not yet have this add-on--does the MaddogX simulate wheel chocks like the PMDG birds do? With the PMDG panels, the brakes are set internally in the sim if the chocks are in place. Barring that, if you use FSUIPC, you can go in the logging page and set FSUIPC up to display the (unsigned 16-bit) values at offsets 0BC4 and 0BC6 to see what the brakes are doing...0 is off, 16383 is full on. When troubleshooting brake problems in the past, I've set it up to display the two brake offsets this way to watch them in an FS window as I moved the control axes. Good luck Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 21, 20188 yr 1 hour ago, w6kd said: One question I'll pose, as I do not yet have this add-on--does the MaddogX simulate wheel chocks like the PMDG birds do? With the PMDG panels, the brakes are set internally in the sim if the chocks are in place. Barring that, if you use FSUIPC, you can go in the logging page and set FSUIPC up to display the (unsigned 16-bit) values at offsets 0BC4 and 0BC6 to see what the brakes are doing...0 is off, 16383 is full on. When troubleshooting brake problems in the past, I've set it up to display the two brake offsets this way to watch them in an FS window as I moved the control axes. Good luck Not sure about the chocks right now but I have seen this issue with GSX especially when you abort the pushback. A couatl restart and a short pushback might help IF they did this. ,
February 21, 20188 yr I think this started after my first pushback. It kept pushing to the point that the plane was almost off the airport. I tried setting the breaks, which stops the push with PMDG aircraft, and that did not work. So, I had to close FSX. Tried again on the shortest push available and it would not stop either. So, these two bugs may be related.
Archived
This topic is now archived and is closed to further replies.