August 18, 20196 yr Hi, on my flightsim recently i have noticed the autogen when landing either doesnt load, or loads very slowly where i am under around 1000ft. i dont have any problems on departure autogen loads perfect on departure however on landing it seems to occur and look very unrealistic. i have seen a few forums with this error and fixes suggest locking frame rates, however doing this i lose performance and i dont really want to do this as i know my pc can handle it as its reasonably high end and was handling it fine before this week, its as if something has just triggered it? i have seen fixes such as remove affininty masks etc. I was wondering if anyone had a clear fix, or tips in solving the problem. thanks, Loui
August 18, 20196 yr Long story short: do not set the 'Autogen draw distance' higher than medium/high. Edited August 18, 20196 yr by Simicro TONY on FS2024Black Square Bonanza & Baron • A2A Comanche • Flyboy Rans S6S • CAS Piper J-3 CubPMDG 777-200ER and 777-300ER, 737-800 BBJ2 • Fenix A320 • iniBuilds A350FSUIPC • Active Sky FS • Chase Plane • Flow • FS2Crew • FSTramp • GSXAlienware R16 i7-14700KF 5.60 GHz l 32 GB DDR5 l RTX 4070 Ti Super l 32" 4K OLED G-SYNC 240 Hz
August 18, 20196 yr Author thankyou, my autogen draw distance is already at high, ill let you know when ive deleted config
August 18, 20196 yr High or medium depends of your rig. Try medium to see what happens. TONY on FS2024Black Square Bonanza & Baron • A2A Comanche • Flyboy Rans S6S • CAS Piper J-3 CubPMDG 777-200ER and 777-300ER, 737-800 BBJ2 • Fenix A320 • iniBuilds A350FSUIPC • Active Sky FS • Chase Plane • Flow • FS2Crew • FSTramp • GSXAlienware R16 i7-14700KF 5.60 GHz l 32 GB DDR5 l RTX 4070 Ti Super l 32" 4K OLED G-SYNC 240 Hz
August 22, 20196 yr Author I have tried autogen draw distance its made a slight difference however the autogen still takes ages to load and doesnt load in very far. I am currently running i5 8600k, 1060 6gb and 16gb ram. Would upgrading my graphics card to a 1070 or 1080 make a big difference? i have attached an image showing the autogen only loads a very close distance and i want to stop this as its unrealistic and i never used to have problems with this, so wondering if buying a better graphics card or cpu would make the difference, thanks Loui https://imgur.com/uLeujPJ.
August 22, 20196 yr This looks normal.. and you are flying a fast airplane.. Maybe you are expecting too much from P3D.. Bert
August 22, 20196 yr Slow autogen is usually associated with the CPU being overtaxed. Is your 8600K overclocked? Default turbo boost is only 4.1 GHz with 5-6 cores active. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
August 22, 20196 yr Author as you see the autogen hasnt loaded atall very far and it never used to be like this. My 8600k isnt overclocked im not sure what do to when overclocking so havnt really touched it, you suggest i do?
Archived
This topic is now archived and is closed to further replies.