Dear brothers,

Today I met some problems with my beloved Flightsim.

I had some shimmering in my FS and i thought: let's solve the issue to read something about it. So I did. 

I found some interesting posts from different people and I started to tweak some little things in my CFG and in my Nvidia Inspector. I started flying from FSDT KFLL and I looked really sharp. Nice! At first sight!

Then I started to cycle around some aircraft and there it started. When arrived at the first AI-plane the scenery beneath it was very blurry at first sight. Thats a normal thing, the system has to sharpen things up. But after a few seconds my (still) beloved Flightsim does a CTD and immediately restarts without giving me any suggestions of the reason for this reset. 

Now I went back to the Nvidia inspector and tweaked it again but the problems keeps existing.

To conclude a question. I cannot find any suggested tweaks from 2018/2019 or even 2020.

Could you guys help me around with your preferred settings within Nvidia? And how does you CFG looks like? 

I could really use some help right now.

Thanks for your time and greetings from the best town in Holland which name is called Putten.

Edited March 1, 20206 yr by meesterlijk

Greetings Bert,

Can you list some system specs?  Which Nvidia drivers you are running perhaps?  What specific CFG file tweaks have you made, and have you tried undoing them?  You can use Administrative Tools via the Control panel in Windows to find the specific file that's faulting, all would be helpful information.

Did you tried to use 'Enbseries'? You might search here for 'HDEv2'.

Bernard

Here are some more details:

My system: 

i7-4790 3.60GHz

16 GB RAM

Nvidia GTX-970

230GB SSD

My FS9.CFG settings which I changed:

[DISPLAY]
RUNWAY_LIGHTS_SURFACE_SCALAR=1.2
RUNWAY_LIGHTS_VASI_SCALAR=1.0
RUNWAY_LIGHTS_APPROACH_SCALAR=1.0
RUNWAY_LIGHTS_STROBE_SCALAR=1.5
UPPER_FRAMERATE_LIMIT=60
TEXTURE_BANDWIDTH_MULT=240
[TERRAIN]
TERRAIN_ERROR_FACTOR=100.000000
TERRAIN_MIN_DEM_AREA=10.000000
TERRAIN_MAX_DEM_AREA=100.000000
TERRAIN_MAX_VERTEX_LEVEL=21
TERRAIN_TEXTURE_SIZE_EXP=8
TERRAIN_AUTOGEN_DENSITY=5
TERRAIN_USE_GRADIENT_MAP=1
TERRAIN_EXTENDED_TEXTURES=1
TERRAIN_DEFAULT_RADIUS=9.5
TERRAIN_EXTENDED_RADIUS=9.0
TERRAIN_EXTENDED_LEVELS=4
[SCENERY]
IMAGE_COMPLEXITY=5
DYNAMIC_SCENERY=1
DYN_SCN_DENSITY=5
DAWN_DUSK_SMOOTHING=1
SUNGLARE=1
LENSFLARE=1

 

My Nvidia Settings:

1. Compatability.

- Antialiasing compatability.   -> 0x004412C1 (Diablo III)

 

3. Antialiasing

- Behavior Flags. -> None

- Gamma Correction -> On

- Line Gamma -> Default

- Mode -> Override any application setting

- Setting -> 4x [4x multisampling]

- Transparancy multisampling -> Enabled

- Transparancy Supersampling -> Supersampling

 

That is I've changed. In the end this issue only happens in Southern Florida. I tried heavy traffic areas like New York and LA but there are no CTD's and everything goed well. I removed the AI-traffic that I installed yesterday but the issue keeps coming back. I also recently bought KFLL from FSDT but could that be the issue? I resized the textures and at the airport everything goes well.

The problem starts when I cycle through the AI-traffic with CTRL-W and at the first plane, when the scenery sharpens, there is that annoying CTD. 

I cannot find the administration tools in the control panel. 

Thats it for now. 

Thanks anyway!

 

 

I don't think that your issue is a matter of tweaking correctly Nvidia or not. At least FS9 should run with a default tweak too. It sounds more to be problem of incompatibility of AI and scenery or scenery with AI. Do you get such CTD's elsewhere or just at KFLL?

Bernard

incompat

 

inc

 

 

 

 

The CTD’s only occur above central/south-Florida. Not even at the airport. It happens when I cycle through the AI-traffic. The first plane I view at high altitude (doesnt matter which one) shows up correctly. But when the landscape beneath the plane sharpens, the CTD occurs. It restarts FS9 without giving any notice. Its very strange and I never experienced anything like this. 

Your probably won't get around to deactivate first all scenery entries and reactivate them step by step until you find out whether the CTD's are caused by one of your sceneries. It might be a time waisting procedure but the only way to know what could be the reason. Before your are starting anything, you should save the flight where the CTD's occur. This way you might check easier the behaviour every time your restart the activated sceneries.

No need to say that you should backup your scenery.cfg before. 

If this action has no impact, then you should the same with your AI traffic. In any case I would first deactivated everything - sceneries and traffic - and see, whether it works at least normal in an almost default mode.

Bernard

You think it has nothing to do with my Nvidia settings or CFG?

On 3/1/2020 at 3:45 PM, meesterlijk said:

When arrived at the first AI-plane the scenery beneath it was very blurry at first sight. Thats a normal thing, the system has to sharpen things up. But after a few seconds my (still) beloved Flightsim does a CTD and immediately restarts without giving me any suggestions of the reason for this reset. 

This looks more like a faulty AI texture. Use DxtFixerX and give it a pass through all FS9 folders. You'll be surprised at the number of textures that are not precisely OK. If it still happens, you'll have to trace the offending texture.

I will have a closer look at my traffic.
 

Sunday I installed 3 packages (Amerijet, Avianva and Azul). After the CTD I removed them and tried again but the CTD kept occurring. I had this before above Florida and eventually I found out that it had something to do with a bad texture on a 737 Max from Gol. 
 

I have a programme called texturedoctor. I will give it a go! 

Today I went back to Florida to give it a try and the problem seems to be solved. I have really no clue what happened but there is no CTD. I changed nothing.

fs9 moves in mysterious ways. 
 

Thanks for your help. 

Did you try DxtFixerX as Luis suggested?

Mitch