August 16, 20205 yr Commercial Member Hi all Please see our news page or social media posts too but here is a cut and paste from the pre-order page: https://www.fulcrumsim.com/pre-orders-opening-17-08-2020/ The fulcrum One yoke is now undergoing final consumer certification (CE, FCC, BS etc) and will be ready to start shipping within the next 4 weeks (Shipping should start around the middle of September 2020). Due to the ongoing Corona virus restrictions that are in place in the UK and the knock on effects of the full lock-down earlier this year, there are still delays with our suppliers and with the official consumer testing certification. This means that when we start shipping products there will be a smaller number than usual. Production will ramp up in the weeks and months after launch as the Yoke will normally be carried in stock ready to be dispatched immediately. Because of this we are implementing a pre-order system where people can register their intent to buy and we will fulfill orders in the order that they were placed. Anyone who registers on here will be contacted prior to shipping to complete payment via paypal or alternatively via credit or debit card. This means that your yoke will not necessarily get shipped by September, depending on your position on the list, but you will get notice before hand when you are contacted for payment. You will not be asked for payment until your Fulcrum One is ready to ship. Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
August 16, 20205 yr Do you know what time the pre-order would be open? Fulcrum One Yoke / FSProjects Airbus Side Stick, Honeycomb Bravo, Slaw Device RX Viper V2 Intel Core Ultra 9 285K, PNY RTX 5080, 48GB RAM
August 16, 20205 yr Author Commercial Member Yes it will be around 9am UTC or 10am UK time. Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
August 17, 20205 yr Great news, except for my bank account. I am eager to replace my aging CH Yoke with a proper one. Flightsim rig: CPU: AMD 5900x | Mobo: MSI X570 MEG Unify | RAM: 32GB G.Skill Trident Z Neo | GPU: Gigabyte RTX 3090 | Storage: M.2 (2 & 4 TB) | PSU: Corsair RM850x | Case: Fractal Define 7 XL Display: Acer Predator x34 3440x1440 | Speakers: Logitech Z906 Controllers: Fulcrum One Yoke | MFG Crosswind v2 pedals | Honeycomb Bravo Quadrant |Thrustmaster TCA Quadrant | Stream Deck XL & Plus | TrackIR 5 Tobii eye tracking
August 20, 20205 yr By any chance you have an estimate of how much the shipping charges are going to be for the USA? Thanks.
August 20, 20205 yr Author Commercial Member Can you give me a state? Or email your enquiry from our website with your address and we will get back to you. Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
August 21, 20205 yr 11 hours ago, tutmeister said: Can you give me a state? Or email your enquiry from our website with your address and we will get back to you. I will email you thru your website. Thank you.
September 2, 20205 yr I have been using the new Microsoft Flight Simulator and using many of the planes included. It will be nice when I can use it with my new Fulcrum One Yoke instead of my old Saitek Pro Flight yoke. VR Flight Simulator Dual Boot Machine Ubuntu 22.04 LTS 64 Bit Windows 11 Pro X-Plane 11.55r2 & 12.05b1 - LIAN LI LANCOOL III MESH PERFORMANCE BLACK Case - ASUS ROG Strix Z790-E Gaming WiFi 6E LGA 1700 - Intel Core i9-13900K @ 5.0 GHz - CORSAIR iCUE H150i RGB PRO XT - 64G DDR5 6400 Ram -ASUS ROG Strix GeForce RTX 4090 OC - Driver Version 546.01 - Dell U3415W 34" Curve Fulcrum One Yoke MFG Crosswind Pedals Bigscreen Beyond with Valve Index controllers on Windows and trying on Linux Vive Pro 2 with Index controllers on Windows Pimax 8KX with Index controllers on Windows Valve Index kit on Windows and Linux
September 2, 20205 yr Author Commercial Member Hopefully not too much longer then! Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
September 5, 20205 yr Hi Chris. I have one on preorder. I also ordered a Honeycomb Bravo throttle and ordered a MFG Crosswind V2 - graphite rudder pedals from Milan. It seems for the pricepoint these should work well together in MSFS 2020 and X-plane11 and last a long time. I am a pilot with about 2150 hours in my Davis DA-2A homebuilt airplane before selling it to a chap in the UK in 1989. I needed the hardware to feel as close to the real thing as possible but not go overboard on the price. Reading all the posts in a few forums got me to this point so I hope I made the right choice in equipment. Asus ROG Strix x 470-f, Ryzen 2700X,Flare X (4x8)3200 CL14 ,EVGA GTX 1070 Ti, 970 EVO 500GB NVMe, 860 EVO 1TB, 860 EVO 2TB,Seasonic TX-850, Hauppauge 1 HVR-1265, LG 27UK650-W 4K Monitor
September 6, 20205 yr Author Commercial Member Well I can say that you definitely did with the yoke! Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
September 6, 20205 yr I've just pre-ordered, then it occurred to me that I don't know how deep the main case is. If it's more than 4" high I'll have to pass. Please tell me it's 3¾" high. 🙂 The World is divided into two groups. Those who say "Give me a link" and those that provide the link. WWG1WGA
September 6, 20205 yr 3 hours ago, tutmeister said: Well I can say that you definitely did with the yoke! Thanks Chris I feel pretty good about that too:-) I ordered the Honeycomb bravo throttle for its flexability and availability. I also ordered the MFG Crosswind V2 for its availability and quality. At least this will give me a solid base to work from in building my sim for MSFS2020 & Xplane 11. Asus ROG Strix x 470-f, Ryzen 2700X,Flare X (4x8)3200 CL14 ,EVGA GTX 1070 Ti, 970 EVO 500GB NVMe, 860 EVO 1TB, 860 EVO 2TB,Seasonic TX-850, Hauppauge 1 HVR-1265, LG 27UK650-W 4K Monitor
September 6, 20205 yr 45 minutes ago, Ron Attwood said: I've just pre-ordered, then it occurred to me that I don't know how deep the main case is. If it's more than 4" high I'll have to pass. Please tell me it's 3¾" high. 🙂 You are good! 3.62" H x 8.27"W x 14.29"L Asus ROG Strix x 470-f, Ryzen 2700X,Flare X (4x8)3200 CL14 ,EVGA GTX 1070 Ti, 970 EVO 500GB NVMe, 860 EVO 1TB, 860 EVO 2TB,Seasonic TX-850, Hauppauge 1 HVR-1265, LG 27UK650-W 4K Monitor
September 7, 20205 yr Author Commercial Member 1 hour ago, Ron Attwood said: I've just pre-ordered, then it occurred to me that I don't know how deep the main case is. If it's more than 4" high I'll have to pass. Please tell me it's 3¾" high. 🙂 Yes Ron you are ok with that. As has been pointed out it is 99mm or 3.9" when clamped down - including the rubber feet which are super grippy, but if you really needed to you could remove them and it is only 92mm or 3.62". Owner, Fulcrum Simulator Controls. fulcrumsim.com facebook.com/fulcrumsimulatorcontrols instagram.com/fulcrumsimulatorcontrols twitter.com/Fulcrum_SC
Archived
This topic is now archived and is closed to further replies.