August 19, 20223 yr hello guys, my name is davide, I have always used the FSLabs airbus but in these days I have been encountering some annoying problems. when I load the aircraft in the default airport at the p3d opening everythink is fine. but when I change the airport (any airport in the world) the flight warning sistem inizialization don't start, and the cockpit it's completely dead. I don't know how to add images to let you see
August 19, 20223 yr Your default flight scenario should be a default P3D aircraft, and not the FSL bus or other 3rd-party add-on. Then, in the opening scenario screen, you should select your starting airport/position and the FSL Scarebus. If the aircraft in your default scenario is not a P3D default airplane, the internal aircraft state variables may not initialize properly. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
August 19, 20223 yr Author So I start p3d and select the Airbus (fslabs), then I select for example new york on runway 4 and when it load the cockpit il completely dead, no sound and I can only move the cpt seat. Again if I open p3d, select the Airbus (fslabs) and start the sim in the default airport, it works
August 19, 20223 yr Moderator @davide96, Bob advised your startup aircraft must be a default such as the Piper Cub. You haven’t said what aircraft you use in your startup scenario. What is it? Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
August 20, 20223 yr I had similar problem when I installed the FSLabs buses but not update my .NET (or VC runtime?) into the latest version (which should came with it's installer anyway). And it will also happens to me now if I every tried somehow updated to their new win10/11 only version.
August 20, 20223 yr A repair / re-installation through the FSLabs Control Centre will most likely fix any issues. If you're still having trouble try posting in the FSL forum or open a ticket. MSI Pro Z690-A DDR4 | i5 13600KF | G.Skill Ripjaws V 32GB 3600MHz | RTX 3080 (12GB) | Samsung 980 M.2 NVMe 500GB | Samsung 980 M.2 NVMe 1TB | Samsung 850EVO 500GB | Crucial P3+ 2TB NVMe | 2TB Seagate HDD | Deepcool AK500 CPU Cooler | Thrustmaster T16000M HOTAS | CH Yoke | Various Winctrl hardware | 21:9 1440p UW monitor | Win 11 23H2 build | MSFS2020 | Tony K.
Archived
This topic is now archived and is closed to further replies.