November 6, 20223 yr Hi guys, does the monitor that displays MSFS (in my case 43" LG 4k TV) need to be plugged into the motherboard in order to take advantage of using the IGPU on my 9900k?. I have both my screens plugged into the GPU ( 3080 ) and i don't see the option for using the IGPU ?, i have it set the GPU even though it warns me against it, the IGPU is turned on in bios ( maximus hero ) . is there another setting i am missing ? ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
November 6, 20223 yr Always plug main gpu to monitor. You can choose integrated gpu for fenix but I think it takes care of it internally. If you plug IGpu to monitor then you will get less than 10 fps. Vinod Kumar i9 10900K 5.3 Ghz, RTX 3090, 32GB RAM, Win 11. Alpha-Yoke, Bravo-Throttles, TM Joystick, TM-Rudder, 48" 4K TV.
November 6, 20223 yr To answer the question. No. Keep monitor plugged into your graphics card. Doesn’t have to be plugged into igpu. Fenix is just borrowing the graphics processing from the Igpu. Regarding it not showing. Go to your device manager in windows. Is it disabled? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
November 6, 20223 yr You need to install the correct iGPU driver from Intel before you can see it as a gpu device and use it with the Fenix (I had to on my rig). Roland MSFS my local airport release: LFOR Chartres-Metropole MSFS Plugins RAAS (registered FSUIPC7 required) MSFS FX for Objects & Landmark in France (Steam and smoke) and Aerial coverage for French nuclear sites
November 6, 20223 yr I was about to type the same thing. @sonny147 - Since you have an Asus MB, press the Windows key and type "AI". See if an application called "AI Suite" pops up. This is the Asus utility for updating the drivers. When you start the application, there will be a status screen. Usually on the left side (I have version 3 and it is), there will be a drop down / slide right menu. You should see "EZ Update". Run that, and it will scan your installation and let you know if you have missing or outdated MB drivers. Edit: Double (triple) check to make sure the iGPU is active in BIOS before doing this. It won't install a driver if it is not active. Edited November 6, 20223 yr by MDFlier i9-10850K, ASUS TUF GAMING Z490-PLUS (WI-FI), 32GB G.SKILL DDR4-3603 / PC4-28800, GIGABYTE RTX5080 16GB WF OC 3 FAN running 3440x1440
November 6, 20223 yr Author guys all of you are/were right for some reason it was switched off in bios , its now on and i downloaded latest drivers from asus and now all is good , thanks fellas ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
November 6, 20223 yr Hi, I have an Asrock MB and my BIOS do not allow me to have both GPU and iGPU running at the same time. Asrock told me to update BIOS but is it worth it given it seems risky ? Pierre
November 6, 20223 yr Author i would do it personally, but iam not you. if you comfortable updating bios it's no big thing does your MB have flashback facility? ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
November 6, 20223 yr 10 minutes ago, Pochi said: Hi, I have an Asrock MB and my BIOS do not allow me to have both GPU and iGPU running at the same time. Asrock told me to update BIOS but is it worth it given it seems risky ? Pierre I had an Asrock in the past, and I seem to recall the BIOS update being relatively straight forward. Just for grins, I searched the internet for Asrock BIOS update and it took me to this page: https://asrock.com/support/index.asp?cat=BIOS Looking at the descriptions of the latest updates at the bottom, they all mention "Enhance iGPU performance.". So, given that your primary intent is to get the iGPU working so the Fenix can use it, I would absolutely recommend it if your MB is using one of those BIOSs. i9-10850K, ASUS TUF GAMING Z490-PLUS (WI-FI), 32GB G.SKILL DDR4-3603 / PC4-28800, GIGABYTE RTX5080 16GB WF OC 3 FAN running 3440x1440
November 6, 20223 yr Thank you both for your answers. I am not sure what is flashback. There is a USB port I can use to update the BIOS without firing the computer it seems. I will have a look at the link posted by MDFlier ! Pierre
November 6, 20223 yr Author i think flashback is ASUS thing, I to have a usb port for " flashback" updating the bios, even easier to do it in the bios over the internet if you have that option? ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
Archived
This topic is now archived and is closed to further replies.