Pochi
Members
-
Joined
-
Last visited
Everything posted by Pochi
-
Hi, I am using your tool with great delight in MSFS2024. Thank you for your hard work. I am using the tool as per a scenario similar to the one specified above for AnKH, so FPS cap setting in AutoFPS with Dynamic setting ON in game. Until now my target FPS was set at 30 in game and also in AutoFPS (with FG x 2.) I see in your exemple that you set autofps to 72. Do you confirm we need to set target FPS after FG, so 60 in autofps if capped at 30 in game ? Also, should I set in game limit to 30 or 31 FPS native ? Then accordingly, Autofps target fps should be set to 60 or 62 (I have a 60Hz screen) ? Sorry for such noob questions but I am unsure if am setting up things well. Best regards, Pierre
-
Well, I tried to activate it again while flying an approach in Tokyo Haneda along the cityskape. Hoped the look would be better than generic buildings but as previous users said, all was melted and therefore ugly. Maybe due to internet connection, but the setting will remain OFF in my case. Pierre
-
Hi, I have the same problem in MSFS2024. I can not spawn any ground service around my Fenix A320 (I use Fenix only). In MSFS2020, I was used to call services from ATC menu and bagages et catering loaders would pop up at any gate and connect to my aircraft. It was just for visual and screenshot because all loading is internal to Fenix of course. Well, in MSFS2024, I can not do it anymore. I even tried to map available keybinds to call the services but to no avail. Maybe I am not understanding how it work in MSFS 2024. Any help would be greatly appreciated. Best regards, Pierre
-
Well, I have yet to see that, at least in France. There is a difference between misaligned and slightly misaligned. Both should guide to the touchdown zone I guess.
-
The real question is : Are PAPI aligned with Glideslope/ glidepath ? Pierre
-
Great news ! I worked on that tarmac. So happy to have a top notch LSGG addon Pierre
-
Hi, I am much more excited by the flight model improvements rather than 319 , 321 😄 Pierre
-
Hi, I use autofps now to maintain 30fps capped with 1/2 refresh rate setting ( my screen is 60hz). How should I set autofps if using Lossless. Keep the same (29) or set it to 59 ? Thanks Pierre
-
-
Say I want my cloud to be at Ultra if my system can handle it but do not want them to drop below High. Currently my cloud are set to High in MSFS. how should I set AutoFPS for this to work ? Pierre
- 545 replies
-
- app
- automatic
- cloud quality
- FPS
-
Tagged with:
-
Thank you ! So if I understand well, if I want TLOD to be 50 on ground I need to set it to 50 in MSFS as well as in AutoFPS. Currently I have 100 in MSFS and 50 in AutoFPS. Pierre
- 545 replies
-
- app
- automatic
- cloud quality
- FPS
-
Tagged with:
-
Hi, Thanks for making your app even better each day ! One question regarding TLOD lock on ground. A s a user said above, when you initiate a flight, it is sometimes still not representative of your performance because you have not yetstarted all your annex app up ie FSLTL. In order to have a pertinent TLOD lock on ground, I guess I have to wait to start AutoFPS last ? Pierre
- 545 replies
-
- app
- automatic
- cloud quality
- FPS
-
Tagged with:
-
Regarding OLOD my understanding is that it increases the level of detail of Objects which is noticeable mainly on ground or close to it. Logic would be to increase it when the aircraft closes to ground while TLOD does the reverse. Pierre
- 545 replies
-
-
- 1
-
-
- app
- automatic
- cloud quality
- FPS
-
Tagged with:
-
Hi there, This app seems to be a little gem. I am about to try but do not know what target FPS to set. I use 1/2 refresh rate Vsync through Nvidia panel to naturally limit my FPS at 30. What target should I use in the auto FPS app ? Best regards, Pierre
-
Thank you very much for the prompt answer Steve, Best regards, Pierre
-
Hello, My Windows 10 updated itself to the new Anniversary version, and installed new CG drivers without asking (Thanks MS...) I read that it is important to delete the shaders files after a new driver install so they can regenerate clean. Although it was for DX9, should I do that also with DX10? If yes, where can I find those shaders files and does it cause trouble with the scenery fixer? Thanks for help and for your great program, Pierre
-
Thank you very much Ben for these informations! Thanks for the FSL Bus videos also, those are great! Keep up the good work. Pierre
-
Hi Ben, Looking at your videos (Q400 FO, FSL320), I wonder how did you achieve such a smooth panning ? Is that Ezdok only or some tweaks to cfg files? Is that done with mouse or joystick hat? Thanks, Pierre
-
I do not know what to think about this software. It is for sure very good performance wise, but the visual is so far from what ASN could achieve in FSX. Mainly, I get little puffy clouds around my plane with a clear limit radius. At first you could think the weather is clear ahead of the aircraft, but in fact the clouds seems to move with the Aircraft. You can see them popping. If I set the cloud visibility setting to the max, it seems it changes nothing regarding the distance the clouds are drawn, I always see the border of the cloud carpet. But my frames get really bad, so something changed obviously but not visually. I keep the cursor in the middle. Yesterday, I flew from Roma to Munich and never got the big congestus cumulus I was expecting on the route. Maybe am I expecting to much from this software. I would be curious to know others experience with the combo Skymaxx + RWC and see high altitude screenshot with big congestus like we have in France these days. Maybe it is a problem on my side... Pierre
-
Thanks Steve! Actually it was in the manual, my bad. Pierre
-
Hello, I would like to ask what should I do in DX10SF after I installed a new aircraft or scenery. Should I uninstall and reinstall librairies? Or should I do an effects conversion? Best regards, Pierre
-
Hi, A big thank you to martin and westman for their help, I did my overclock today and it went well! I used the ROG tutorial link provided by Martin and followed it to the letter except I choose 42 as the CPU core ratio and 1,25v as CPU core voltage (from a beginner overclock video). I did the 1 hour stress test from Realbench and it went very well with a all core max temp 63° and 59° average during the test. Seems good to me^^ I will test in game now. Pierre
-
Thanks for the answer Steve, I settled on using FSX default water texture and color. It is quite close to what I was looking for. I am very glad I tried your fixer out, the result is excellent! Pierre
-
Thanks for your help ! Yes, I read lots of stuff about AI Suite causing problems so I elected not to install it. I prefer to do it directly in BIOS and know what is really going on. Rog guide is very good and simple. I may try it soon. However I have some questions : - If I want to only try 4,2 ghz, how do I know what voltage I need ? Do I need to change the default value? - Does RAM XMP has any influence on the overclcok. Can I keep the XMP profile for which my ram is made? - Do I need to deactivate something regarding Turboboost if I want to always keep 4,2 ghz? I will look for Turbo V core also, Pierre
-
Hello, I am back at requesting your help after building my computer recently. The system is stable in the sim and I would like to try a little overclock out of my CPU. My target is 4,2 ghz as a first step. My system : W10 CM Asus Z170i Pro Gaming I5 6600K MSI GTX970 gaming 8go RAM NH U12S cooler Could you please guide me through the steps required to overclock? What is the simpliest method? I do not have AI Suite installed and I prefer to manage the overclock directly in BIOS. Any help would be greatly appreciated, best regards, pierre
