March 3, 20233 yr 1 hour ago, cagarini said: Could you try with Zink enabled in the Graphics options ? Edit: do you need Zink ON / enabled to load Zibo737 without loading Cessna first? Zink did not fix it. Stared XP12 First screen Settings Graphics Zink = enabled Start new flight Zibo737 PC froze up “Preparing world” Rebooted PC, started XP12, turned Zink Off. Edited March 3, 20233 yr by vonmar Best Regards, Vaughan Martell PP-ASEL KDTW
March 3, 20233 yr 37 minutes ago, vonmar said: Edit: do you need Zink ON / enabled to load Zibo737 without loading Cessna first? Zink did not fix it. Stared XP12 First screen Settings Graphics Zink = enabled Start new flight Zibo737 PC froze up “Preparing world” Rebooted PC, started XP12, turned Zink Off. You might want to retest since you seem to have missed a step. After enabling Zink in the seettings, you need to restart X-Plane before it will take effect. So your steps should be: Start XP12 Settings > Graphics > Enable Zink Exit XP12 Start XP12 Start new flight Zibo 737
March 3, 20233 yr 1 hour ago, Malaromane said: You might want to retest since you seem to have missed a step. After enabling Zink in the seettings, you need to restart X-Plane before it will take effect. So your steps should be: Start XP12 Settings > Graphics > Enable Zink Exit XP12 Start XP12 Start new flight Zibo 737 Hi, Questions: 1. Do you need Zink ON / enabled to load Zibo737 without loading Cessna first on your setup? "After enabling Zink in the seettings, you need to restart X-Plane before it will take effect." 2. Where did you see that information? Actually I had tested several times with Zink On/enabled re-booting PC after freeze up(s) with and without loading Cessna first but did not mention it in my previous post. However, I just now I followed your steps again just to re-verify. With Zink On/enabled all Zibo737 tests failed with full PC freeze ups "Preparing world" if Cessna was not loaded first. Edited March 3, 20233 yr by vonmar Best Regards, Vaughan Martell PP-ASEL KDTW
March 3, 20233 yr 57 minutes ago, vonmar said: [snip] "After enabling Zink in the seettings, you need to restart X-Plane before it will take effect." 2. Where did you see that information? Actually I had tested several times with Zink On/enabled re-booting PC after freeze up(s) with and without loading Cessna first but did not mention it in my previous post. However, I just now I followed your steps again just to re-verify. With Zink On/enabled all Zibo737 tests failed with full PC freeze ups "Preparing world" if Cessna was not loaded first. In answer to your question 2, when you tick the box beside the "Enable Zink" setting, text gets added below the setting that states "Restart X-Plane to enable Zink" Sorry to hear that you're still having trouble with the Zibo. I don't have enough knowledge about the Zibo (or Zink) to offer further suggestions.
March 3, 20233 yr 5 minutes ago, Malaromane said: In answer to your question 2, when you tick the box beside the "Enable Zink" setting, text gets added below the setting that states "Restart X-Plane to enable Zink" Sorry to hear that you're still having trouble with the Zibo. I don't have enough knowledge about the Zibo (or Zink) to offer further suggestions. Hi, "In answer to your question 2, when you tick the box beside the "Enable Zink" setting, text gets added below the setting that states "Restart X-Plane to enable Zink" That is not what is said on my setup. Could you double check it again? Note: Per my first question I should have asked if you have tested Zibo737, and Zink on XP12? Best Regards, Vaughan Martell PP-ASEL KDTW
March 4, 20233 yr 16 hours ago, Malaromane said: In answer to your question 2, when you tick the box beside the "Enable Zink" setting, text gets added below the setting that states "Restart X-Plane to enable Zink" Sorry to hear that you're still having trouble with the Zibo. I don't have enough knowledge about the Zibo (or Zink) to offer further suggestions. "In answer to your question 2, when you tick the box beside the "Enable Zink" setting, text gets added below the setting that states "Restart X-Plane to enable Zink" Did you have a chance to look again at what the "Enable Zink" text actually says? My steps were: Stared XP12 First screen Settings Graphics Zink = enabled Start new flight Zibo737 PC froze up “Preparing world” Rebooted PC, started XP12, turned Zink Off. Edited March 4, 20233 yr by vonmar Best Regards, Vaughan Martell PP-ASEL KDTW
March 4, 20233 yr The Crash reporting is certainly working, this update is crashing all the time... Torfi
March 4, 20233 yr Commercial Member 7 minutes ago, torfih said: The Crash reporting is certainly working, this update is crashing all the time... Make sure you don't have any incompatible plugins installed.
March 4, 20233 yr 3 hours ago, vonmar said: Did you have a chance to look again at what the "Enable Zink" text actually says? The exact wording is "Restart X-Plane to apply changes" The text appears beneath the Zink setting when you tick the box to enable it.
March 4, 20233 yr 1 hour ago, Malaromane said: The exact wording is "Restart X-Plane to apply changes" The text appears beneath the Zink setting when you tick the box to enable it. Ok, thanks for the follow up. Best Regards, Vaughan Martell PP-ASEL KDTW
Archived
This topic is now archived and is closed to further replies.