Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Another XP12 Update

Featured Replies

Hi Everybody,

 

Looks like another update has been released.

Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

                Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME                    One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck

That'd be 12.04r2

Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE
Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@60Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090
Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus,
TM TCA Officer Pack
, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case

  • Author
19 minutes ago, Bob Scott said:

That'd be 12.04r2

Yep

Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

                Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME                    One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck

  • Author
3 hours ago, Malaromane said:

Apparently it's just an update to fix the Crash Reporter after someone at LR noticed that they hadn't received any crash reports from b2, b3, and r1 (as posted over on the .org).

https://forums.x-plane.org/index.php?/forums/topic/284673-1204r1-released/&do=findComment&comment=2519616

Hi,

They got an automated crash report from me today, mid flight from West Palm to Ronkonkama. Guess they fixed the reporter. haha

Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

                Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME                    One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck

Well 😞  12.04r2 broke XP12 for me, well, kind of...

After installing it last night I started XP12, loaded a situation with the Zibo and after a while my PC froze (Win11 with the latest updates) in such a way that a hard reset was the only way to recover 😕

I then restarted XP12 and chose another default aircraft (the LR 737), which loaded after a while with no errors in the LOG.

Then I restarted XP12 and enabled "Zink", restarted XP12 as suggested by the interface and when ready I chose the Zibo again, which ended up hanging XP12 on start, but this turn around I was able to stop the process, reload XP12, choose the LR 737 and from there jump into the Zibo.

Flying gliders since 1980

Flightsimming since 1992

AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)

21 minutes ago, cagarini said:

Well 😞  12.04r2 broke XP12 for me, well, kind of...

After installing it last night I started XP12, loaded a situation with the Zibo and after a while my PC froze (Win11 with the latest updates) in such a way that a hard reset was the only way to recover 😕

I then restarted XP12 and chose another default aircraft (the LR 737), which loaded after a while with no errors in the LOG.

Then I restarted XP12 and enabled "Zink", restarted XP12 as suggested by the interface and when ready I chose the Zibo again, which ended up hanging XP12 on start, but this turn around I was able to stop the process, reload XP12, choose the LR 737 and from there jump into the Zibo.

Hi,

“Then I restarted XP12 and enabled "Zink", restarted XP12 as suggested by the interface”

My XP12 r2 Zinc does not say that?


So far with XP12 I have always had to load the Cessna first then Zibo737.

Have you gotten Zibo737 (XP12) to load without loading Cessna first?

Best Regards,

Vaughan Martell  PP-ASEL KDTW

9 minutes ago, vonmar said:

 


Hi,

“Then I restarted XP12 and enabled "Zink", restarted XP12 as suggested by the interface”

My XP12 r2 Zinc does not say that?


So far with XP12 I have always had to load the Cessna first then Zibo737.

Have you gotten Zibo737 (XP12) to load without loading Cessna first?

I did before last weekend, and then again with 12.04r1, but this 12.04r2 broke it again and I always need to start by loading, not necessarily the C172... I opt for loading the default LR 737 before the Zibo 737 an it also works ok.

Flying gliders since 1980

Flightsimming since 1992

AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)

Cagarini ,

About "Zink" you mentioned:

"

“Then I restarted XP12 and enabled "Zink", restarted XP12 as suggested by the interface”"

My XP12 r2 Zinc does not say that?"

Could you verify what the Zink information pop-up [tooltip] actually says?

Edited by vonmar

Best Regards,

Vaughan Martell  PP-ASEL KDTW

Ok, I will, but from memory it said: Reload XP12 ...

Flying gliders since 1980

Flightsimming since 1992

AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)

1 minute ago, cagarini said:

Ok, I will, but from memory it said: Reload XP12 ...

Ok,

Let me know what the entire text says ?

Best Regards,

Vaughan Martell  PP-ASEL KDTW

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.