August 28, 2025Aug 28 Commercial Member This topic is for the open beta of FS-ATC-Chatter 1.2.4. Use the following link to jump to the download for the latest beta build: 1.2.4 has been released: https://www.avsim.com/forums/topic/678645-fs-atc-chatter-124-open-beta/page/2/#findComment-5620787 1.2.4 is an enhancement release. The first enhancement is an integration to SayIntentions.AI ATC. This integration allows SayIntentions.AI to control for which controller chatter should be played. It also supports pausing chatter playback when SayIntentions.AI indicates that the radio is busy due to pilot/ATC transmission, ATIS monitoring, other nearby pilot transmissions, and canned or generated SayIntions.AI chatter. The demo clip set has also been increased from 400 to 1,000 clips in the U.S. The larger demo clip set will allow SayIntentions.AI users to participate in this open data with a reasonable set of free clips. The full clip set of over 59,000 clips is available for purchase at: https://stickandrudderstudios.com/fs-atc-chatter-overview/ Please leave any feedback on the beta by replying to this topic. Edited November 19, 2025Nov 19 by markcellis 1.2.4 Final posted
August 28, 2025Aug 28 Author Commercial Member 1.2.4 Beta 1 is available You can install the beta by downloading the zip archive from: https://www.stickandrudderstudios.com/downloads/FS-ATC-Chatter-Setup-1.2.4B1-Demo.zip?v= Unzip the archive to a temporary folder and then run the installer EXE file. If you already own the full FS-ATC-Chatter collection, allow the installer to place the beta in the same location as your current installation. This will ensure that the full clip set will be available to the player. If you do not own the full collection, the beta demo can be used for free with the included 1,000 U.S.-based clips. Read the SayIntentions.AI section of the UserGuide.pdf, which is located in the root FS-ATC-Chatter folder, to learn how to enable the integration. Leave feedback on the beta by replying to this topic.
October 6, 2025Oct 6 Hi Mark, X-ATC Chatter and Say AI are a great combo, thanks for integrating XATC! Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
October 10, 2025Oct 10 Author Commercial Member 1.2.4 Beta 2 is available You can install the beta by downloading the zip archive from: https://www.stickandrudderstudios.com/downloads/FS-ATC-Chatter-Setup-1.2.4B2-Demo.zip?v= Changes Added an option to use the Little Navmap databases directly when they are available Installation Unzip the archive to a temporary folder and then run the installer EXE file. If you already own the full FS-ATC-Chatter collection, allow the installer to place the beta in the same location as your current installation. This will ensure that the full clip set will be available to the player. If you do not own the full collection, the beta demo can be used for free with the included 1,000 U.S.-based clips. Read the SayIntentions.AI section of the UserGuide.pdf, which is located in the root FS-ATC-Chatter folder, to learn how to enable the integration. Leave feedback on the beta by replying to this topic. What's Next Support for filtering clips by country Work on some of the issues: https://github.com/markcellis/FS-ATC-Chatter/issues Edited October 10, 2025Oct 10 by markcellis
October 13, 2025Oct 13 Author Commercial Member 1.2.4 Beta 3 is available You can install the beta by downloading the zip archive from: https://www.stickandrudderstudios.com/downloads/FS-ATC-Chatter-Setup-1.2.4B3-Demo.zip?v= Changes Fixed issue #7, set pause to max pause after a frequency change Fixed issue #6, Nagging check for updates bug Add Joystick mappings for chatter volume, Issue #5 Installation Unzip the archive to a temporary folder and then run the installer EXE file. If you already own the full FS-ATC-Chatter collection, allow the installer to place the beta in the same location as your current installation. This will ensure that the full clip set will be available to the player. If you do not own the full collection, the beta demo can be used for free with the included 1,000 U.S.-based clips. Read the SayIntentions.AI section of the UserGuide.pdf, which is located in the root FS-ATC-Chatter folder, to learn how to enable the integration. Leave feedback on the beta by replying to this topic. What's Next Support for filtering clips by country Work on some of the issues: https://github.com/markcellis/FS-ATC-Chatter/issues
October 25, 2025Oct 25 Author Commercial Member 1.2.4 Beta 4 is available You can install the beta by downloading the zip archive from: https://www.stickandrudderstudios.com/downloads/FS-ATC-Chatter-Setup-1.2.4B4-Demo.zip?v= Changes Added support for filtering by country Added support to auto-select the country based on the tuned facility or aircraft location Installation Unzip the archive to a temporary folder and then run the installer EXE file. If you already own the full FS-ATC-Chatter collection, allow the installer to place the beta in the same location as your current installation. This will ensure that the full clip set will be available to the player. If you do not own the full collection, the beta demo can be used for free with the included 1,000 U.S.-based clips. Read the SayIntentions.AI section of the UserGuide.pdf, which is located in the root FS-ATC-Chatter folder, to learn how to enable the integration. Leave feedback on the beta by replying to this topic. What's Next Work on some of the issues: https://github.com/markcellis/FS-ATC-Chatter/issues
October 25, 2025Oct 25 FS-ATC-Chatter is on my PC for years. And I really appreciate the integration with Say Intention. One more way to improve immersion. Let's Beta test it. Thank you! Vincent B. Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.
October 25, 2025Oct 25 Any possibility of a similar integration with BeyondATC even though it is a MSFS exclusive? PC1: AMD Ryzen 9800X3D | Zotac RTX 5090 SOLID | Asus TUF X670E-Plus | G.SKILL 64GB DDR5 PC 6000 CL30 | 4TB NVMe | Noctua NH-D15 | Asus TUF 1000W Gold | be quiet! Pure Base 500DX | Noctua NH-D15S | LG OLED CX 48" + 2x Acer Nitro XV240YP 24" + 2x 15.6" Touch-screen Panels PC2: AMD Ryzen 7500F | Asrock 7900 GRE Challenger OC | Gigabyte B650I AX | Corsair 32GB DDR5 6000 CL36 | 1TB NVMe | CM Hyper 212 | Corsair 750W Gold | Lian Li TU150 ITX | SAMSUNG Odyssey G9 49" Winctrl Ursa Minor Sidestick + Ursa Minor 32 Throttle & PAC - Thrustmaster Boeing TCA Yoke - Thrustmaster HOTAS Warthog - Honeycomb Bravo Throttle - MFG Crosswind Rudder Pedals - TrackIR - Stream Deck XL + Stream Deck Plus - Winctrl MCDU + 2 MFD's - Meta Quest 3 (VR)
October 25, 2025Oct 25 Author Commercial Member 52 minutes ago, GCBraun said: Any possibility of a similar integration with BeyondATC even though it is a MSFS exclusive? I'm open to doing that, but I would need help from the BATC guys. Would you like to suggest it to them? You can have them contact me at: [email protected] Mark Edited October 25, 2025Oct 25 by markcellis
October 25, 2025Oct 25 Author Commercial Member Question I would like to know more about how you work with MSFS ATC and FS-ATC-Chatter. As an example, do you map joystick buttons to the ATC response panel to initiate requests and respond to ATC? As you might know, MSFS has no API that I can use to know when ATC is transmitting. If I had that, I could pause clips when the radio is busy with ATC COMS. The best I could come up with so far was to cause FS-ATC-Chatter to set the next clip start after the MAX delay setting in seconds whenever you change frequencies on the radio. Typically when you do that you are likely to start an ATC request so I could at least prevent the next clip from starting too soon. I might be able to do something similar when I see you interact with the ATC panel. That is why I'd like to know how to interact with it. Mark
October 25, 2025Oct 25 13 minutes ago, markcellis said: I would like to know more about how you work with MSFS ATC and FS-ATC-Chatter. As an example, do you map joystick buttons to the ATC response panel to initiate requests and respond to ATC? Personaly, I used to just use the MSFS ATC menu and select 1, 2, 3... keystrokes and that's it. No joystick button assignment. But since SI has trafic injection, I don't use the default MSFS ATC anymore. Vincent B. Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.
October 25, 2025Oct 25 Vincent B. Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.
October 26, 2025Oct 26 Author Commercial Member @vbazillioYou will get that radio busy status when: Either you or SIAI is transmitting SIAI Chatter is playing If it is happening too much and you are getting mostly SIAI chatter, then you can turn down the SIAI chatter slider.
October 26, 2025Oct 26 I personally disable the chatter of Say Intention since their AI trafic injection. By the way, my first flights were great with FS ATC Chatter in background not overlapping SI audio. Vincent B. Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.
Create an account or sign in to comment