I need help to identify and ultimately fix this C208 Caravan missing texture. As I have only AIG installed and active, I initially though it was the C208 from AI. But even after removing the "AIGAIM_HTAI_C208B_GrandCaravan" (only C208 folder inside my AIG folder structure), the faulty display is still there. Which is the immersion killer. For the record, I have also run the AIG integrated check models, flightplan and texture. Without success.

FYI, traffic are injected by Say Intentions.

I always use Little Nav Map to show me as it also shows the title of the ai aircraft being used.

Little Navmap would be my first check too, because it usually tells you exactly which model title the sim is using. If the bad Caravan is still showing after removing the AIG C208 folder, I'd start suspecting it isn't coming from AIG at all. It could be a default model or another traffic package still sitting in Community.\n\nIf you want to isolate it quickly, I'd try one short test with only AIG-related traffic packages enabled and everything else traffic-related disabled. If the texture issue is still there after that, then at least you know it's not a leftover package conflict.

Thanks @Dave_YVR @malichek ! LNM is the perfect tool to diagnose my prob.

With your help I found the guilty model/texture: "AIGAIM_AIG_NZ-Air Milford 2000 Limited Cessna 208 Caravan I - ZK-SKA". In addition - my mistake - I pointed to the wrong AI folder. For the record, the correct one is in \AIG Install Folder\aig-aitraffic-oci\SimObjects\Airplanes\

Edited May 1May 1 by vbazillio

What the heck is the NZ Milford Sound Caravan doing in San Francisco? 😁

😄

That specific livery is a known issue, I think I am missing it as well from my OCI setup. 

As for what it's doing showing up in the Bay area has to so with your model matching level. PSXT doesn't find the actual reg to use in your collection so based on your setting it subs in one that is similar.  

11 minutes ago, Dave_YVR said:

That specific livery is a known issue, I think I am missing it as well from my OCI setup. 

The issue has been raised where it should be (AIG ?) ? Anyway, now I know I have to delete AIG C208 folder 😉 Thanks.

I'm not much demanding for a specific livery. I'm glad to have General Aviation traffic more or less everywhere, and mostly on small airfield I practise with Say Intentions.

I certainly wouldn't delete the entire C208 folder from OCI for one missing livery. If anything, run ai manager and simply uninstall that one package for NZ Air Milford.

6 minutes ago, Dave_YVR said:

I certainly wouldn't delete the entire C208 folder from OCI for one missing livery. If anything, run ai manager and simply uninstall that one package for NZ Air Milford.

That makes sense. Actually, I don't want to run after missing textures and discover in MSFS these pink stuff. As the checking feature in AIManager doesn't seems efficient and as far as I remember there's a lot of AIManager features that are not supported in MSFS24, I went straight to the point. Will look in AIManager where is this selected deletion feature.

2 hours ago, Dave_YVR said:

If anything, run ai manager and simply uninstall that one package for NZ Air Milford

Help is appreciated. How can I remove properly, without deleting manually the faulty texture folder ("\aig-aitraffic-oci\SimObjects\Airplanes\AIGAIM_HTAI_C208_CaravanI\texture.-NZ-Air Milford_ZK-SKB") with the help of AIManager?

AI-Manager -> Aircraft -> Installed -> Select Directory "Airplanes\AIGAIM_HTAI_C208_CaravanI" -> select the two Air Milford ZK-SKA and SKB -> finally, clic Remove incl.texture folder.

Is that correct?

 

Edited May 1May 1 by vbazillio

That could work, I have never tried it. When I want to remove a single livery from OCI, I do it manually and update the layout.json. But I have also done this literally thousands of times.

Try it and see would be my guess, otherwise go to flightplans and from the installed section find NZ-Air Milford select the red garbage bin and to also remove the textures when it asks.

19 minutes ago, Dave_YVR said:

Try it and see would be my guess, otherwise go to flightplans and from the installed section find NZ-Air Milford select the red garbage bin and to also remove the textures when it asks.

thats the best way. I will have a look at the FP and why it causes issues.