Stefano

Is this a FSBuild self-generated route? A correct route (taken from vatroute.net) sholud be BPK Q295 CLN L620 REDFA. Have you tried it?

lol That's outstanding! I'm really happy to hear that we now have a working LWE demo, I will of course give it a shot ASAP. Thanks Stephen, really appreciated.

Hi Stephen, thanks for your reply. I'm interested in Opus after many very positive comments from your satisfied customers. Anyway I'd like to try myself the software, just to make sure it's what I expect from it. It would be nice if you can add in the demo some kind of time-limited LWE. In the meantime I will continue to follow the developement (the wind smoothing incorporated in the last build is definitely a plus, if it works of course - just kidding!), and maybe one day I will become your customer. Bye S.

Hello there, I'm interested in testing the LWE of OpusFSX in demo mode before purchasing. Please anyone can tell me how LWE works in demo mode? If I understand correctly it's totally disabled, is this right? Thanks in advance

Hello there, yesterday I was trying to figure out a "ready to taxi" startup state with fs2crew. From what I've seen it seems that it starts with the before taxi checklist, and then we follow the normal procedures. Is this correct? Regarding the aircraft, I'm usign the "ready to taxi" config state of the atr. Once the aircraft is loaded, I set up the FMC as required, perform the pushback and then start fs2crew and go through the before taxi checklist. What else should be set on the aircraft before firing the before taxi checklist? Thanks in advance

Thanks. I suppose that all the differences in the clickspots are clearly listed in the manuals...

Thanks Bryan, I'll give them a try. BTW, are the clickspots different in the VC from the 2D panel?

Hello there, I kindly ask if I can use my beloved fs2crew in VC mode in FSX with my favourite addons, namely the Flight1 ATR72, LVLD763, PMDG 747 and (in a near future) the NGX. I'm talking about button control versions of Fs2Crew. I used to fly with fs2crew in the 2D panels before, but now I'm competely addicted to the VC and I will no longer use the 2D panel. Thanks in advance

Some useful information here: http://forum.avsim.n...irtual-cockpit/

Tested it yesterday, but I had some problems in handling the plane thereafter.Maybe I'm handling the airplane not correctly, so I kindly ask if someone can help me...While on the ground before takeoff with throttle set to 0 the plane was slightly moving forward. Taxiing was too fast even with very little throttle.I had low idle set with propeller rpm full forwardOn final I wasn't able to slow below 90kts. I set throttle to 0, high idle, propeller rpm full forward, flaps 20.I kindly ask if these configurations are OK. Those were used to work before the FDE upgrade.Thanks is advance

This is exactly the main reason because I have not upgraded anything. Just wondering if anything has been changed during these years.

Hello there, three years have passed since I set up my FS9 on my simming PC. Actually it is a WinXP box with SP2 and some other windows patches. Video card is a 8800GTS with 640MB, drivers are a 175.xx release.It has been connected to the internet very few times (just add-on activations), so I never executed Windows Update. Now I kindly ask if there would be any performance increase (or decrease) in applying SP3 and all the other windows patches.Video drivers are stick at 175.xx since I read many posts stating that new driver releases were useful for newer GPUs only, so I don't bothered with the new releases. Sorry if this has been asked before, a forum search led me to no useful results. Thanks in advance

I finally had a chance to redo this flight, this time with ROCKI7.RLG AQULA flight plan.While inbound RLG, Center asked me about the approach to KEGE. I choosed ILS for RWY25, and center replied me "OK, you can expect that" (that was the message I was unable to understand!)At some point during my approach I had a "radar services terminated" call, and then I landed normally. Can't remember if tower contacted me or if I had to contact tower, BTW.Thanks for your help RonStefano

Ron, thanks for your support.I'll retry this flight in the next days following your guidelines, and see what happen.Have a nice dayStefano

Probably this is the point, but I can't understand how I'm leaved on my own (that is, I don't understand what the controller is telling to me). And to which point I'll be on my own? EGE has tower position, will tower contact me or I have to contact them by myself before landing? If I recall correctly I have been vectored from KDEN at first and then received a "proceed on course" clearance. I'll check it back with your flightplan anyway. But maybe I need to edit it in fsbuild to add DEN VOR and ZIMMER wpt, I'm sure they weren't on my flightplan.Thanks for your helpStefano

Hello there, yesterday I was doing a short flight from KDEN to KEGE with RCv43 in FS9. I was aiming for a LDA/DME RWY 25 arrival. Flight plan was a simple DEN ROCKI7.RLG EGE at 16000 ft in an ATR72Departure went fine and while I was in cruise I had an ATC call about my arrival. My english is not that good so I was not able to fully understand what had been asked, that's my fault.So my question is: which call should I expect from RC for my arrival?These are the KEGE radio facilities (according to airnav):EAGLE GROUND: 121.8 [0700-1900]EAGLE TOWER: 119.8 [0700-1900]CLEARANCE DELIVERY: 124.75APCH/DEP SVC PRVDD BY DENVER ARTCC ON FREQS 128.65/282.2 (KREMMLING RCAG).CLEARANCE DELIVERY PRVDD BY DENVER ARTCC ON FREQ 124.75 WHEN ATCT CLSD. Thanks for your supportStefano Piccoli

OK, just to let anyone know, it was a RAM problem.After re-running memtest86+ several times, some errors started to occur.1 stick was faulty, so I removed it and now everything works. Now the system has only 2GB of RAM, im planning to return to 4GB, even if XP will not use all them. I'll then thest the /3GB switch.Thanks everyoneStefano

Good point Jim.In fact I've done nothing about a /3GB switch, I surely missed it.Anyway, since yesterday my PC won't start at all :( so maybe I really have a RAM problem too.I have to fix the hardware problem and then I will set the /3GB switch. We'll see what will happen.ThanksStefano

Thanks for your help.Just run memtest86+, with 100% tests passed. btw, if everything worked fine before the tweaks, why it should be the problem?Stefano

Hello there,I just tweaked up my system following Nick_N guide for FSX. I have to say that the improvement in quality and FPS was amazing, thanks Nick for posting it!Since then, however, I'm experiencing BSOD after 20 minutes or so in the sim. Error messages vary each time, the last one was 0x100000d1 (0x062e5794, 0x00000002, 0x00000000, 0xba009c0f)Before applying the tweaks everything was running fine, with lower video quality of course.Any ideas on the problem anyone?Actual configuration is:- Core2 E6600- 3x1GB DDR2-800 - Asus P5K mainboard (P35 chipset)- Nvidia GeForce 8800GTS 640MB- 22" LCD monitor running at 1680x1050- 250GB maxtor system HD- HD WD Raptor for sims - 1 partition for FS9 + 1 partition for FSX sp2- WinXP32bit SP3Tanks in advanceStefano

@TechguyMaxC:at this time I'm not planning a complete system makeover, so I have some budget for cpu OR gpu upgrade only. Just 200 EUR max@bobbyjackI'm playing whith NickN's tuning suggestions in FSX right now, but so far I were not able to obtain good results. I'm still trying, though.OC is a good idea, but I clearly need an "Overclocking for dummies" guide. Can you suggest me some good gides/pdfs/pages around?Thank youStefano

Hello there,I'm looking on how to upgrade my system.Actual configuration is:- Core2 E6600 - 3x1GB DDR2-800 (originally were 4GB, but 1 stick went bad just after the end of the warranty...)- Asus P5K mainboard (P35 chipset)- Nvidia GeForce 8800GTS 640MB- 22" LCD monitor running at 1680x1050- 250GB maxtor system HD - HD WD Raptor for sims - 1 partition for FS9 + 1 partition for FSX sp2- WinXP32bitI don't know how to overclock, so everything is running at their nominal frequencies. Performance is ok in FS9.My goal is to improve FSX performance, which is about 20 fps average, but under 10fps at times. I whish to mantain the mainboard, so what should I change? CPU or GPU?Thanks in advanceStefano

Hi Bryan,I'm having the same problem here... A new system where I'm trying to reinstall fs2crew but no .lic file is generated...Can you help me please?ThanksStefano

Thanks Bryan, have a nice day

Hi Bryan,just a quick question: I have FS9 and FSX on the same PC, and I'm already using the ATR on FS9 with fs2crew.I'm goint to install ATR on FSX too, so I just want to know if I can harm fs2crew in some way by doing this. I don't think that this will happen, just asking for your confirmation please :)ByeStefano