rioslu

Whatever it is I completed a flight using RXP GTN with Turbo Boost turned off. I have never had to turn off Turbo Boost for any reason. When running the Adobe Apps and rendering video all CPU cores get maxed to 100% without a hitch. I always complete long haul flights of up to 8hrs without a hitch running the common add-ons with great performance and solid FPS. So if when running RXP GTN with Turbo Boost turned on causes BSOD then it does raise a flag and makes me wonder. Thanks for your help.

I've got it somewhat figured out. I can run the F1 GTN for as long as needed without a Blue Screen or CTD other than the lag/slow response we are aware of that is caused by the incompatibility of the TRAINER with WINDOWS 2004. I did run BluScreenView which resulted in PSHED.dll and ntoskrnl.exe as being the faulting DLL and EXE. I searched and found no solution as to what could cause it on my system. No explanation as to why only RXP was causing Blue Screen. What I did next is disable Intel Turbo Boost in the mother board BIOS. Now RXP functions normal, no BSOD. I can interact with GTN and fly around just fine. I run plenty of FPS games, Adobe Creative Cloud Apps, P3Dv5 with all add-ons and have never had an issue until now with RXP. Never had the need to disable Intel Turbo Boost. I understand the need for the workaround to correct the TRAINER lag/response with WINDOWS 2004 but could that be the cause? Is RXP accessing some kind system resource to fool the TRAINER into working as it should? Again not blaming just wondering. I can now go flying VFR and will keep the RXP in play. Thank You!

I will run blue_screen_view and take a look. Why would only RXP affect my hardware? I’m no expert just wondering. Thanks

No change using default aircraft. Configured only the popup using RXP aircraft setup. 1 minute in BSOD. New log file, rxpGTN_menu.dll.log 20/05/31 19:27:42.225 12176 - ] # rxpGTN_menu.dll version 2.5.25.0 20/05/31 19:27:42.227 12176 INFO ] edit panel: D:\PREPAR3D\SimObjects\Airplanes\Carenado Commander 114\panel\panel.cfg 20/05/31 19:28:40.430 05080 INFO ] 20/05/31 19:28:40.432 05080 INFO ] edit panel: D:\PREPAR3D\SimObjects\Airplanes\Carenado Commander 114\panel\panel.cfg

Downloaded the app_crash app. Started the sim, loaded the A2A 182 at default airport. Took approximately 3mins then BSOD. No warning, just goes to the Blue Screen then PC reboots. Event Viewer only shows "Computer has reebooted from a bugcheck". If I remove RXP from the 182 ALL is normal. Just completed a 4hr flight with the PMDG 744 without any issues. Only 2 logs set in Documents folder, rxpGtnSim.dll.log 20/05/31 18:54:12.109 06424 - ] # rxpGtnSim64.dll version 2.5.25.0 20/05/31 18:54:12.108 06424 INFO ] 20/05/31 18:54:13.528 05432 INFO ] GTN 750.1 - TRAINER 6623 20/05/31 18:54:31.084 05432 INFO ] GTN 750.1 - TRAINER 6623 rxpGTN.gau.log 20/05/31 18:54:09.969 06424 - ] # rxpGTN.dll version 2.5.25.0 20/05/31 18:54:09.969 06424 INFO ] I will try adding RXP into a default P3Dv5 Aircraft and report back.

I sure will, thanks!

That's how I set it up to begin with. I followed, https://a2asimulations.com/forum/viewtopic.php?f=121&t=70651

Hello, I'm in need of some help. Just bought the RXP GTN-750 to replace the F1 in my A2A 182. I have installed Windows 10 2004 and experienced the F1 GTN lag/slow response. Reading the below threads convinced me to switch. Now here's my problem. P3Dv5 HF1 is the only sim installed. A2A 182 runs flawlessly using default GPS. Upon adding RXP GTN via the Add-Ons -Setup Aircraft I get a BSOD after 2-5 mins. PC restarts, I get back into the sim and BAM! BSOD again after 2-5mins in the 182. If I restore the panel via the Add-Ons -Setup Aircraft and let the Sim reload the 182 I can fly until fuel runs out without a problem. F1 has been completely uninstalled, GARMIN trainer uninstalled. RXP uninstalled then reinstalled. BSOD persists only when RXP 750 is ran. The GTN powers on and reads registered to me, I can interact with it up until BSOD. RXP 2.5.25 and GARMIN 6.62.3 are installed in their default locations. Other than that P3Dv5 runs flawlessly. Luis

Another smooth flyer here!

Win7 Ultimate with same add-ons and no problems whatsoever.

I had the same issue upon release. Found a post mentioning to make sure that none of the PMDG folders and files were'nt set to "Read Only". I unchecked them all and ever since no CTD for me at end of any flight.

No problems here. Just the heading jerk issue which is very minor and user error problems. Thanks PMDG!!

Yup all good here, other than the already mentioned small bug of HDG jerk

Adding to the count....

I've posted twice about the elevator issue but no one seems to care.Luis

Same issue as above and my right elevator still doesnt move with new update and all systems running.ThanksLuis

Yup.Luis

Please excuse my ignorance and/or me doing something wrong but only my left elevator moves in spot view. All systems running, loaded default flight then switched to PSS 757.ThanksLuis

Make sure you enter the correct information in the required lines, such as email used when purchasing, order number, and password used to login into your PMDG e-commerce account. I did the same thing, downloaded the patch when it was available, tryed installing, had to completely uninstall, reinstalled then waited for the PMDG site to come back online and it worked. I now have version 1.1.All I have to say to PMDG is AMAZING!!!Edited for spelling.