alihor

Sorry, no success. The VC is without any electric energy!

Hi , the volocopter works before Version 1.32.7.0 without any problem. I have all MODs for FPS and for Checklists deleted Even Ctrl-E does not work. Could delete and restore Volocopter be a solution?? Does anybody have this problem also.

Oh, Andrew, I am sorry about this. I will continue to find my own mouse macros for the FSL bus. I am looking forward to "hear" from you again.

Hi Andrew, do you have new findings for the FSLabs A320 mouse macros ?

Hi, the Attachment in the post before is now working: klick on "attachment" , type password "linda00", download the files or watch the picture.

Hi Andrew, here my findings: (@ Petraeus: sorry, was a typing error) My Bus Version is FSLabs A320X v2.0.2.450 for P3Dv4 My P3D Version is P3D v4.3.29.25520 The Rectangel in your Macro for APU Master is 11=APUMaster=RX24403806,3 My Mouse Macro shows for APU Master in the undocked Overhead 1=FSL_APU_Master=RX200a8,3 The Rectangel in your Macro for Eng1 Pump is HYDENGPUMP1=RX24401800,3 My Mouse Macro shows for Eng1 Pump in the undocked Overhead window Eng1 Pump=RX20071,3 The Rectangel in your Macro for MasterWarn is MasterWarn=RX22002000 My Mouse Macro shows for MasterWarn in the Main WIndow Master Warn=RX20000,3 Additional question: What is the difference in assigning a function by FSUIPC (see picture 1) or by LINDA (see picture 2) ? Attached is the file config-hid.lua from February last year, when everything worked perfect. Andrew, what can I do more? btw: how can I decrease the line spacing ? Thanks for all !! I am sorry, I dont know how to upload in this forum my attachments !! Please help. Attachment Password "linda00"

Hi Andrew, First please apologize my wrong addressing. I thought your first name is Scot. sorry. I have long experience with FSUIPC and mouse macros. Therefore I found that the offsets are different. In January last year I used your FSLA32XX macros file also on 4 Monitors and it worked correctly!! But now, something changed??? Is that correct what Perseus wrote before?

Hi Scot, here I am again. As I am/was a software developer here is my question: Can I change the mousearea rectangles in your "FSLA3XX_MAIN.MCRO" by changing the data with a relativ offset to my undocked window of the e.g.: OVH panel? Are the RX values independent of the OVH window size ? How did you find the values? Is there a description of this method? Or is it in the FSUIPC manual "creating mouse macros" ? thanks

Hi Scot, I do understand you, not to spend more time. But I do not understand that Multi Monitor is unique ? All of my "Pilot" friends have at least 2 monitors ! My Cockpit Builder friends have more than 3 Monitors ! Three of them run the FSLabs A320 and they would like to assign their hardware in an easy way. So I can no more recommend using LINDA with the Macro. I have to train them with "Rotor_Brake" method. Sorry. regards Alhard

Thanks Scot for your quick response. I do not understand your last statement about Rotor_.Brake, what do you mean? Here I found the FSL A320 parameter list : https://forums.flightsimlabs.com/index.php?/topic/22402-v440-update-in-depth-tutorial-to-bind-switches-and-push-buttons-to-keyboard-or-hardware-for-the-a3xx/ rotorbrake_param_list.txt Thanks Alhard

Hi Scot, my environment is a multi monitor with 5 monitors. My system is: WIN7PRO (no need for WIN10 update) , P3D V4.5.14, FSLabs A320 V5, FSUPC V6, LINDA V3.2.6. I installed your Macro Files V 1.5 When I run my bus with P3D and assign e.g. a button function, I get the message: "Macro: mouse action Failed: Rect X2440300a, Action 13 (LeftRelease)" Now I found, that the mouse area of my Overhead Panel, which resides on a different monitor as "undocked window", is wrong and does not match. I found this by creating testwise a mouse macro.on a switch on the OVH panel. What can I do to use your fantastic Macro Files ?? Or should I go back to the Rotor_Brake method? Thanks Alhard

Hi Andrew, it was overhasty to say "OK".The error "not enough timers available" still shows up in LINDA 3.1.1 . Sorry. What do you need to know from my system ?

Hey, now its works properly. Thank you.

Hi Andrew, I still have this behaviour in LINDA Version 3.0.12 on WIN7 and P3D V5.12

Thanks Andrew, yes I know how to configure in LINDA setup. But my question was different (sorry for my not proper english). so here again: How can I launch LINDA conditionally, based on a specific aircraft. E.g.: when I start P3D and launch the Beech Baron, then I do not want that LINDA has started, But when I start P3D and launch the FSL A320, then I need Linda with your macros. Should be similar to FSUIPC profiles, which are aircraft dependant Thanks

Hi , is it possible to start LINDA with a specific aircraft ? I do not want that LINDA starts always with P3D in general. I just need LINDA functions with my FSL A3xx, not with others. The other aircrafts are controlled by SPAD.neXt. Thanks

I think you misunderstodd my question. I did ask for the right mouse click, yes, but right was the wrong word, sorry. I meant the click on the correct/proper position in the panels. I just want to understand how do you find the proper position.

Hi Andrew, for the time beeing my last question: How do you manage to click on the right button in my multi monitor environment and e.g. the overhead panel is undocked on a separate monitor ? It's a miracle for me. Please explain, I would understand. thanks

Hey Andrew, SUCCESS this little test code in user.lua works fine: -- insert your code below here: -- 200211 my code AH function ALL_LT_ON () ipc.sleep(20) VC_OVHD_EXTLT_Strobe_on () ipc.sleep(20) VC_OVHD_EXTLT_Beacon_on () ipc.sleep(20) end I assigned it to a button and the lights were ON. thanks for your help, now I will improve this function.

Hi Andrew, thanks for the clarification. My main question is: when I program in user.lua my sequence, can I assign this function in LINDA joystick assignments. Will this function appear in the list of the macros you wrote fo FSL A3xx ? As I programmed in the past a lot of LUA scripts, now I know how to solve my problem. I will report when I succeeded. Thanks PS. why didnt I get an email notification?

Hi Kael, could you please show me your coding. Thanks

Hi Andrew, cause I didn't find another post for my problem I think I am correct here. I am really very happy about the macro "FSLabs Airbus A3xx-X 1.4 (3 Jan 20)" as I am flying the FSL A320 since more than one year. I was always looking for software assigning my game controller buttons to my Airbus. Now with this wonderful Linda Macro I can assign ALL the A320 switches , buttons and rotarys. AND it works perfect. I also use FSUIPC, LUA and SPADneXt for many years. My question: how can I assign more than one function to ONE button. How can I configure the FSLabs A3xx macro for assigning more than one function. e.g. I want to switch all external lights with on button. I am IT expert and retired software developper. Thanks , best regards Alhard

I am struggling with my camera configurations in FSX "aircraft.cfg" and I have a simple question: What is the difference between [cameradefinition.1] and cameradefinition.001] ? I am reading in the SDK these different indexes. Thanks

Hi Nico, As to the recommendation of Michael I would install AND subscribe. But unfortunately all my Sims run on WIN7 and PSXT runs on WIN10 only. Regards Alhard

Thanks for the clarification