Best

I've been using this program the last two days and connects with XPUIPC 2.0.3.8 no issues.

I adjusted the sensitivity and it seems to be working. Thanks

I think I did turn the sensitivity down but will check again when I am home. I did move the speakers back and gone as far as turning the volume down but how low do I do this. What's changed, I've have the same setup for a long time now and was fine. No headset

I solved the issues with FSUIPC with re-configuring the keys, not sure what went wrong but it's fixed. I still have the issue with the the FO constantly turning off the packs. It doesn't seem to just happen when the FO speaks but any noise will trigger the packs off command. Sometimes I see the green bar packs off flash several times, then the FO will repeat several times packs off. What do you suggest I do to get rid of this. Very annoying.

I agree about the packs turning off from the FO hearing the sounds from the mic. I ran the flight without FS2crew and the pack issue is gone. However the autopilot keeps turning off, gear keeps going down and spoilers keep arming itself. Must be a FSUIPC issue. There was a update to FSUIPC so I updated and re-calibrated but same thing. I checked for key conflicts but not finding any, strange.

I created a new voice profile but same thing. When the FO speaks the green bar sais packs off/packs auto and after the FO finishes speaking the packs go off. I am not saying a word when this happens. When the autopilot disconnects and the spoilers arm there are no commands in the green bar. The spoilers move to arm and I have to reset all the time. Also the landing gear keeps going to the on position from off. I cant leave the flight because the autopilot keeps turning off. Could this be FSUIPC issue combined with FS2crew or just a FS2crew re-install?

Lately when I fly the NGX the FO keeps arming the spoilers, lowering the landing gear and turning off the packs on the ground and in flight. Very annoying. Any ideas why this happens?

I just tried the 361.43 drivers and surprise to me it works. I'm getting around 30 fps like I should. N1 30fps limit+vsync+TB and slider to unlimited. Any explanation for this? I have always updated the drivers, thinking the newer driver will work better. Where is AM and should I change it to 116 for 8 cores? Thanks for the tip.

I updated the driver to the latest, I returned NI to the default but same thing. The panel bug not sure what your referring to.

Unfortunately I can't seem to get more than 13 fps on my system even at a default airport with default airplane. Never had FPS problems until now. I just recently updated to P3Dv3.2 and discovered this topic. i set my NI limit to 30fps, display Settings set Unlimited, VSync On, and Triple Buffer On but not getting anywhere near 30 frames. I have a fast PC as well. This is also a fresh install of P3Dv3.2 in win10. SSD-Nvidia 660Ti-I7-4790-asus P8Z77 MB

Am I the only one that doesn't like the US captains voice, he sounds like a machine, too articulated. Cabin crew voice no good either, it sounds rushed, I never use the US voice set with SOP 1. I like the old voice better. I always use the UK voice.

Thanks for info. I will check it out

I was wondering if PMDG can add the Sunwing Airlines livery. It is Canada's leading leisure Airline. Any chance of this?

On the website is sais get 25 % off current FS2crew products but when I went to buy is sais the coupon code is expired. I was curious about your products and finally bought NGX and 777 but would like to buy Dash 8. Seeing that I bought NGX this year I know I will get a discount on the reboot version so can you extend this 25% off so I can purchase Dash 8.

Thanks for this, very nice. Would you be able to upload the NGX flow as well?

Thanks. Got ahead of myself. Will purchase today

Never used FS2crew products but thinking about buying with the ground crew as well. can I use this in P3D as we'll.

Another last minute post by PMDG as always.

I actually had issue # 2 this past week before SP1. I was taken off at KFLL and all of a sudden the plane started to do a nose dive and I could not pull out of the dive, the plane became unresponsive and crashed. I am having some video issues and thought it might have something to do with that. Just updated my nvidia driver and having video problems since. Dont know if video issue can cause this at all. Earlier today with SP1 on approach to the runway the plane captured the loc but was turning back and forth trying to line up with the runway. I tried to execute a missed approach but the plane kept turning and descending and I couldnt straighten it out or level off so it crashed. I was at 4000ft when this started to happen so I had plenty of time to try to recover but could'nt control the plane.

You are correct, Sir. Answer #4 corrected the problem. Perhaps you can tell me why the resolution has to be the same. Thanks

When you start fsx a icon appears on the taskbar, always. I am loading a saved flight. After it finishes loading, all I see is my desktop. The fsx screen disappears. I can here the flight but when I cllick on the icon from the taskbar to try to open the screen it doesn't work. When I right click the icon a menu pops up to close the window. This has been going on for awhile so I would like to load my saved flights successfully.

I'm having difficulty loading a saved flight. It takes a long time to load and the fsx icon sits on the lower left taskbar. When I click on it nothing happens. Anyone have an answer for this?

Not that I cared so much about the taxi camera but why isn't it displayed on the cockpit display? is this hard to do?

For me deleting the ini file and remapping didn't work either. I am now using FSX controls. The NGX works fine with FSUIPC.

Have been posting about this for 3 days but no response. NEED HELP topic title. Is PMDG going to look at this?