-
Content Count
2,760 -
Donations
$0.00 -
Joined
-
Last visited
Content Type
Profiles
Forums
AVSIM
Media Demo
Downloads
Gallery
Blogs
Forms
Everything posted by Andydigital
-
Recurring Taxi request Ground sends me to Tower
Andydigital replied to Flypops's topic in Pilot2ATC Bug Reporting Forum
Have you run the Taxi Management app and imported the airports you are having problems with? Sounds like it isn't seeing anything at all at the moment other than a runway. -
Recurring Taxi request Ground sends me to Tower
Andydigital replied to Flypops's topic in Pilot2ATC Bug Reporting Forum
In these situations I use a lillte work-around when holding at the intended runway holding point. If you get told to tune to ground, then just do as requested then get ground to hand you back to the tower again, but ask for a "midfield departure" rather than "ready for depature" etc. What is likely happening here is that the hold short node in the airport file doesn't line up with the visual hold short line you see in the cockpit, there is most likely another node closer to the runway. Bearing the above in mind you can also try just to taxi a little further forward to the runway and see if ground will automatically hand you off to the tower, at which point you will be able to request departure. -
Yes seeing the same thing here. I'm using RealTraffic and PSX with MSFS. Ver 8P2 Win11.
-
Feature request: Arrival gate selection
Andydigital replied to jstnj's topic in Pilot2ATC Users Forum
You already can, click info> Runway/Gates and select your stand when you land, or during your descent. -
How to ask ATC direct to a way point
Andydigital replied to dsalman's topic in Pilot2ATC Users Forum
<Callsign> Request Direct to: then spell out the name of the waypoint phonetically. -
The heading push is a weird one, what you need to send is -2147483635 note the minus sign. I could go into why you need to do that but I don't completely understand it myself. But basically in this case the number is too big for a 32bit integer, so instead of adding 13 to 2147483648 you subtract it e.g. 2147483635 BUT you also have to make it a negative number, so you send -2147483635 to fgcp_event. I've yet to come across anything else where I have to do the above but I've not gone much beyond the FGCP so far with my setup. I hope I didn't confuse things.
-
Just to explain what I meant about the animation tags, this is the section that does nothing other than make said item animate in the cockpit. <Animation> <Parameter> <Code>(L:fgcp_hdg_knob1, enum)</Code> </Parameter> </Animation>
-
The heading knob section starts at line 13948 with beta 28 installed, use Notepad++ to view the file then you will have line numbers. The section you need is a few lines later 13959, the wheel up and down section start at 13961. The LVAR you need to send those numbers to is at the end of those lines i.e. fgcp_event To find that section I just used the FIND facility with "hdg" as the term used. Just keep pressing enter until you get to a section that has a block of code with (M;Event) at the start of the lines. M:Event is mouse event.
-
Aren’t those wrapped in animation tags? If they are then that will just fire the animation without doing the logic. The logic drives the animation, not vice versa. All the push pull logic is normally in a 4 line block of code, all of the knobs have them. Where possible I find it better to use the mouse wheel numbers as they are much shorter and easier to work with. There are a couple of items that only allow mouse click actions though. The Altitude knob push pull has a 5 line section of code for manipulation. Working from memory here but when you right click to push the alt knob in, you have to remember to send the right release logic too otherwise the alt knob stays pushed in and that is not a thing in reality. You adjust altitude in 100’s of feet while holding the alt knob in. When you let go of it it automatically pops back out again and you are back in 1000 feet steps. The way I use it in Spad is to push the Alt knob in then have a 4 second pause before sending the right release logic, that way I get 4 seconds to dial in 100 feet steps, then it switches back on its own.
-
Found it https://www.flythemaddog.com/forum/applications/core/interface/file/attachment.php?id=6447
-
Guidance IPC ipc ap spd ipc ap hdg ipc ap alt ipc ap vs ipc ap spd (ias or mac as in guidance set) ipc ap vs (ias or pitch as in guidance set) The custom commands PDF you can get from the Maddog forum has the above referenced for the displays, not sure if that helps @guenseli
-
I was using Spads data monitor and I noticed the minus sign when looking at various things, then the light bulb came on above my head lol. p.s. sent you a message too.
-
Figured it out the 3 way switch I am working on. <Code>(L:CM2_strobe_switch1, enum) 10 *</Code> </Parameter> </Animation> <MouseRect> <Cursor>Hand</Cursor> <MouseFlags>LeftSingle+RightSingle+WheelUp+WheelDown</MouseFlags> <CallbackCode> (M:Event) 'LeftSingle' scmi 0 == if{ 536870912 7 + (>L:ext_lights_event,number) } (M:Event) 'RightSingle' scmi 0 == if{ 2147483648 7 + (>L:ext_lights_event,number) } (M:Event) 'WheelDown' scmi 0 == if{ 536870912 7 + (>L:ext_lights_event,number) } (M:Event) 'WheelUp' scmi 0 == if{ 2147483648 7 + (>L:ext_lights_event,number) } </CallbackCode> RightSingle you need to send 2147483648 -7, but its also sent as a negative number e.g. -2147483641
-
Same problem for me Guenter, right click codes don't seem to work, only left ones do.
-
Report Cessna 414AW Chancellor issues
Andydigital replied to Flysimware's topic in Flysimware Reciprocating Aircraft
Funnily enough my first flight with 1.3 I can no longer stay on the runway in a crosswind, which just confirms my statement above. -
Report Cessna 414AW Chancellor issues
Andydigital replied to Flysimware's topic in Flysimware Reciprocating Aircraft
I'm sorry to say you need to find a new owner as that one is broken lol. The bungee is connected to the nosewheel not the rudder. If it worked the way that owner suggested then you couldn't take-off in a crosswind. The rudder would also be flopping about in the wind with just a bungee connection, its basic physics. -
Tip: Hide Throttles Clickspot
Andydigital replied to ryanbatc's topic in Flysimware Reciprocating Aircraft
Now if I could only do that in real life with the Bravo Quadrant, stupid BIP location makes it impossible to see 🙂 The switches should have been at the bottom too. -
Pushback not initated after request.
Andydigital replied to traceisrad's topic in Pilot2ATC Bug Reporting Forum
If you are waiting for the plane to start pushing back you will be sat there a long time, that is not a feature of Pilot2ATC, the actual pushing back of the plane is down to you and your tools for such an activity. It's hard to offer anymore advice as I have no clue what simulator you are using. -
If a SAPI voice is playing you can’t move the volume slider, once it stops you can move it again.
-
Reduce the volume of your sim then increase the overall volume for everything else by increasing you master volume level on your device. I run X-Plane at 50% and everything else but master at 100%. It's not ideal but some voice packs especially Ivona ones are very quiet compared to Cereproc for example.
-
You have probably installed the data to the wrong location. The path in my Navigraph FMS data manager is pointing to the P2ATC folder "C:\Pilot2ATC_2020_x64". The installer should then put the files in the correct folder structure.
-
Cheers, that's another 3 bought 🙂
-
Location of database? (resolved)
Andydigital replied to PeterBremer's topic in RXP GTN 750/650 Touch
I believe it's in the manual, I'm fairly sure I read it in there a few days ago. -
Have a read of the included manual, that scenario is covered in detail with instructions on what to do.