perryfincher

I agree with you, Thomas. Boeing 727 has always been my favorite aircraft and it would be cool if PMDG made on for FSX. There are others out there, but not impress with them. Looking forward to what PMDG comes up with in the future.

First, I would like to say that I am really enjoying the PMDG 777. Other than the small fixes that I am sure will be addressed in the upcoming SP, the T7 seems to run stable and with no major issues. I for one have not seen any problems with running this aircraft on my system. PMDG has done a fantastic job and looking forward to 747V2 and DC-6. Despite probably being mocked or talked down to in this thread, I thought I would put a bug in PMDG ear to perhaps consider making the aircraft listed below in the future. Boeing 727 Boeing 767 Douglas DC-10 I have no doubt that PMDGs level of precision and attention to detail will make these aircraft the best ever. Yes, I know that other developers have made these aircraft, however, face it, PMDG is the best. Anyways, just a thought. Thanks

Make sure your gear is down and locked before arming the auto brakes. If my memory serves me correctly, Boeing aircraft, gear has to be down before arming the auto brakes.

Krazyk, Thanks for the information. If I understand you correctly, in looking at KSFO airport diagram: If I were to pick departure runway 10R, I would do the following? Elevation at RNWY 10R is 6 and opposite end which is RNWY 28L at elevation of 13 Subtract 13-6=7 Divide 7 by RNWY length of 10,602 = .0006602 Mulitply .0006602 X 100 = 0.066% So I would enter in FMC of the T7 for runway slope: U0.7/Dry (Wet). I think I understand it correctly. Thanks everyone

How do one finds the runway slope and how is it entered into the FMC? Thanks

Been planning on buying the T7 since day one. Really looking forward to its release.

Cool!!! I am looking forward to the release of the T7. I have the NGX, but spend most of my time flying the MD-11 and 744 Thanks for the info.

In the screen shots below from the thread for Amalgamated 777 BETA Images, to get the FMC to pop up shown in screenshot, is there click spots for this or was a software like EZDOK used? If EZDOK was used, is it easy to configure it to popup the FMC, Pedistal, and Overhead? Thanks

Does anyone have an issue with no nose wheel steering? The nose wheel does not turn and stay fixed in forward position. Virtavia support stated it does turn, but offered no insight on how to make sure it does. I have tried at various low speeds and up to 20 knots, no turning nose wheel. Thought to ask if anyone has same issue and if there is a fix. Thanks

Windows 7 is very protective of the program and program (86) folder. Open windows explorer and create the following folders: On your C drive: Creata a folder called "Microsoft Games" Inside that folder create another folder called "Flight Simulator 2004" When done it should look like the following: C:/Microsoft Games/Flight Simulator 2004 When installing FS9, make sure the install path points to these two folders and everything works fine. Then install PMDG MD-11, it will automatically detect the FS9 path. Also, when installing any games or other programs, it is best to make sure it does not install in the default "program" and/or "program (86)" folders. Windows 7 protects these files and may not accept some programs. I hope this helps you.

I was wondering if the thought to model or show a heat blur effect when engines are running, has been considered. Just a thought. Thanks

Thanks Chris for the information. Really looking forward to the furture release of the Triple Seven.

I was wanting to know if any has or knows how to keep map the VRInsight MCP Combo with the NGX. I don't have a glue how to do this and would like some instructions on how to do so. Thanks in advance

I can't wait for the PMDG 737 NGX.I also just placed an order for a 737 throttle quadrant from ThrottleTek which I will receive in the middle of September.I can't wait to use the tq with the 737 NGX.ThrottleTek tq is about as realistic you can get without paying thousands of dollars.http://www.throttletek.com/ I am ready!!!!!!!!!!!!!!!!Thanks for the updates, Robert

Have been able to fly an entire 4 hour flight on FSX and no Fatal Errors or CTDs.Thanks, Andysim for the information you posted which did the trick!!!

Thanks Andysim.Did just that and will try to fly on FSX on my next day off on Monday.Will let you know how things worked out.Thanks

I continue to have fatal error and FSX crashes to desktop.There has been mentioning of deleting the uiautmationcore.dll from FSX and system files.On the other hand, it has been mentioned not to delete these from the system files and was given a uiautomationcore.dll file to place in the root of FSX.FSX continues to crash while flying at various times.I have no glue what to do about this.Update (1545 hrs on 06-15-2011)I have also just copied and pasted this "HIGHMEMFIX=1" into the FSX.cfg file.Has there been any noticable fixes when this entry is put into the cfg file as well as the uiautomationcore.dll in regards to theCTD Fatal Error issue with FSX and Windows7?Will try FSX again on my next set of days off which will be next Monday.Any help will be greatly appreciated.Trying to get all this resolved before the NGX is released.Thanks

It's awesome on just how much work PMDG has put into the NGX.Can't wait to get it.Just have a question.Will the NGX have a 2D cockpit or just a 3D like the J4100?I am having a hard time to figure out how to look around in the J4100, do what needs to be done and look back at the forward view outwindshield quickly even using the hat switch on my yoke.Just curious as I preferr 2D cockpits.Thanks

Hey Ryan,Just sent you a ticket.Thanks again for all your help

Just wondering if anyone has had a problem with FSX crashing to desktop while flying.I read something about a UIAMINATION.DLL file in three locations needed to be removed, but I did a search on my computerand could not locate this file. I have seen other UI files with other words in the description, but not amination.I was just curious if anyone else had the problem.Thanks

Cha Ching!!!!Ryan fixed my problem and all is well.Turns out, it really was my anti virus (Trend Micro).I am not sure about the details.Ryan is the man!!!!!!!!!!!!!!!!!!!Thanks Ryan for all your help.................I will be looking forward to the release of the 737NGX and eventually the 777 in the future.Many thanks to everyone on the forum that helped me with ideas to check to figure out my problem.Thanks again everyone.

I just tried pinging www.precisionmanuals.com.No reply at all."Request timed out" four times with 100% loss.Is this a possibility as to why my products will not validate?Thanks

Did you say you just tried to ping the validation server and it did not repsond, if I understood you correctly.How do I ping an IP address?Thanks, Alexander

I have tried that too to go around the router.I can't find a list of blacklisted IPs nor to I know where to look.I use Trend Micro for Internet Security.This is frustrating and a pain in the rear.I really don't think it is a problem on my end.Is it a possibility that the PMDG server is not accepting my validation or IP?I am going to be extremely unhappy if I have to go and by the CD version of my products just to make things work.

Yes, I have the FSX versions.