gdr

I didn't read all the posts but if you follow the demo instructions instead of all this whining and crying you would get a hour of demo once the aircraft is in the air. So if you can add that’s 5hr of demo. The price is to high for the FPS benefit I experienced.

Thats It....

HelloYou have a nice systemYou have a little more power than I (soon to be up graded)I went with a Matrox box w/3 19" LGs LCDs Resolution of 3840x1024_32.and a 15" LCD in the other port for un-docked windows.and other stuff OK....Yea the stealth j3 would work in Afghanistan All default J3 textures invisible and missing all vc gauges

Hello:Yes. I mean Flight PlanYou see I know there is one for FFT Boeings I had one, but I lost it and I don't know all the destinations and times.Just forget it. This way to much trouble :( Ill just use the Air Bus pack. :( GDR

Well Hi:Yes I did and at PAI and flightsim and I may be mistaken but I didn't see any BOEING FFT FPsThat match PAI FFT BOEING AI Aircraftand that's why I'm asking for some help in finding a BOEING FFT FP.So unless you know were I can find it don't please bother me Can you tell the difference between Boeing and Airbus?Thanks

Hello:I downloaded all FFT-Frontier Airlines Boeings textures andPAI Boeing MDLs but can't find a FP to match aircraft?Help!Also posted on PAI and FlightsimThanksGerry Reid

Hello:I downloaded all FFT-Frontier Airlines Boeings textures andPAI Boeing MDLs but can't find a FP to match aircraft?Help!Also posted on PAI and FlightsimThanksGerry Reid

While in flight if I change the weather RPMs drop and aircraft stalls.Do I have something set wrong?gdr1944

Hello:The Afcad2 I made shows no errorsThe all attitudes Afcad2 for this airport are set at flightdeck height except towerbut the runway is at sea level in sim.AI aircraft and airport are listed in my AI Flight CreatorAircraft flight_plan set for TNG from one carrier to another Aircraft has properly set parking from take off carrier.TTools compiles flight_plan with no errors.So.......what am I doing wrong?GDR

OK..Thanks..will do this wkend by the way F4F4 is WW2 I forgot the Wildcat part.AH..can TNG be to and from same airpoart?Gerry

Hello again.OK..I tried to use the search window but it does not allow a two letter entry...(Carrier AI)I have AFcad2 and Ttools and the Dolittle scenery. I would like to do F4F4 TNG to each carrier.I know how to add AI to land airports and gate assignments.Thanks

Hello:I tried to find info on the forum, maybe someone could give the correct heading?gdr

Howdy allMitsubishi A6M2N CFS conversion to FS9When in water floatplane jitters / vibrates with engine stopped andTurn and bank ball jumping / jitters to right When in flight aircraft yaws to right / autopilot off.Edit *.air file / Aircraft.cfg ?GDR1944

Thanks everyoneI did succeed assigning axis and calibrating eight levers using only FSUIPC v3.90.with joystick disabled and deleted all assignments in the default SF9 cfg menu.You have to cfg joys, rudders/brakes) using FSUIPC but for me its was worth it.I now have a sold setup with the FSUIPC.ini file backed up.I haven't got the indent right yet but I'm working on itIf you are having button assignments mysteriously show up here is a tip I picked up from the flightsim network form.ADD this line to the general section of FSUIPC.ini : Eliminate Transients=YesI added this line after I cfg everything and Ive had no buttion changes or additions.Your friendGerry Reid

I need to know to how assign the axis to 4 eng FS9 aircraft and stoprandom assignment of buttons.CH rudder will not stay centered but will suddenly flick hard over.I have tried many different tutorials and manuals.The CH tut by John Cook for instance states "Disable the joy stick and do not install CM and use FSUIPC . When I unstalled CM FS9 didn't see any of my CH controllers I guess it took all the drivers.I reinstalled CM and just deleted the folder. OK.. I disabled the joystick and after completing the TUT I had 8 working axis but no control surfaces. Yes I tried to use FSUIPC to cfg the joy and rudders

Hello:Two CH Throttle Quads. T=ThrottleF=Fuel MixP= Prop PitchQuadrant 2 = PPPP FF Quadrant 1 = TTTT FFI can't get any of the axis to read 0% to 100% useing the FSUIPC ModulALL Axis Assignments are sent direct to FSUIPC calibrate.When sent to FS normal axis I get all sorts of jumping and double axis movement. Were do I start first?Do I calibrate using CH software (Disables FS9 calibration ) Do I calibrate using FS9Do I calibrate using FSUIPCThanksGerry

Hello Jim D.:Yes your right! I finely got it all straight in my mind..witch is sometimes a hard thing to do. :( I'm re-re cfg Saitek joystick, CH rudder ped and 2 CH quads useing only updated registered FSUIPC.I haven't cfg the extra keys on my Saitek Cyborg Keyboard yet. I looked at the Profile Editor andit scares the :( out of me.Thanks for the conformation Gerry Reid

Hello AllI have TWO CH Throttle Quadrants and I

OK..Ill will check it out.Thanks

HelloOk I found a kneeboard_keys.htm and a kneeboard_keys_fs.htm and I opened them....so how do you insert/place the link?Gerry Reid

Thanks for all the suggestions every thing OK

Hello:Do any of the Apps work in FS9 ?Gerry Reid

What Risk? The app works just fine. AH...I injoy looking at the splashscreen instead of a load bar.

HelloI don't know to convert txt or pdf to htm is their a tut on how to do this?Many downloaded aircraft have the htm checklist requirement in the *cfg file, but most downloaded checklists are in phd format?Can you edit the *cfg file to display pdf within FS9 kneeboard ?sorry Im thought jumping all over the place.Gerry Reid

ThanksGot Them!