abh_jc_03

I just installed the 767 with UAC disabled and no Antivirus disabled. It asked me to allow several gauges so I hit the run button. As soon as I pick airport and starts the loading when it finishes I get the fatal error everytime. Anybody have any suggestions?

I was enroute to my airport and all of sudden I get a VNAV Disconnected shows up in my FMC. I still had almost 200 miles to go and it said end of route, even though I wasn't and it was set in the FMC. Why would it just erase the rest of my flight plan?

I was playing with the autopilot on with no problems and then all of a sudden it disengaged and no longer will we engage. I have no warning lights hydraulics are on everything looks good yet the autopilot will not engage. It seems that my flight director switch is on but the light indicator is off but flight director has the green light indicator.

I was playing with the autopilot on with no problems and then all of a sudden it disengaged and no longer will we engage. I have no warning lights hydraulics are on everything looks good yet the autopilot will not engage.

I have VOXATC installed and have done several speech training exercises for it to recognize me. When it has me speak the first time it doesn't pick it up and I speak the SAME exact way the second time it does. This happens for every communication I do. It isn't anything with my training program and I don't know how else to get it to work correctly. For now I just have to repeat myself and then it takes it. Help?

I am not sure where to put this in the forums, so I will put it here for now. I downloaded the add on scenery for Coast Guard station Clearwater. I am wondering if there is anyway to have the Seahawk coast guard helicopters like at the real air station. I saw the Flight1 Helo Traffic 2009. I am not sure if this will do that or not. I have the CS C130 Coast Guard aircraft and I don't see any of those either. I turned my traffic up and there are the default AWACS. Maybe it is a limitation of FSX. I am not sure. Can anybody point me in the right direction?

I am interested in creating my first mission. I was thinking about something down the lines of creating a ship at sea in distress or a boat flipped over like the basic fsx mission and use my C130 to locate then fly back to base and fly my coast guard helo to rescue the boat. Is there a possibility or no? I would like to not put a direct point from A to B. More like a search for the boat in the vacinity. Any help would be greatly appreciated. Thank you.

I have active sky next and I am wondering something. I talked to the REX forum and they said they have the anvil cumulonimbus cloud and that it is up to the weather engine to depict it. I see the towering clouds but can ASN create the anvil cumulonimbus clouds?

Am I able to use the reality xp GNS430 or 530 in the Flight1 KingAir b200 or Milviz C310?

Yeah that's what I have in the panel now.

I'll look into that. Right now I have reality xp 430 and 530 gps with crossfill.

I have the turbine duke v2. Not thrilled about the wood panel look bit still great aircraft.

I am looking for a nice exterior and nice VC. I want realistic flight dynamics and I have heard Carenado is more eye candy than flight dynamics.

I am between buying the Carenado C90 King Air and the Milviz 310R. Any suggestions?

I was flying from ORBX's Fall City, 1WA6. I loaded up FSX and ASN created the live weather for the location. When I tried to set manual mode and type in the airport it goes to gray like it can't find it. Any solution to this? I know its a private airport but I would think if it can load weather into it, I should be able to make my own as well.

I have installed the sound enhancements 2013 on my comptuer and when I load up the airbus in fsx and hit fly now I get a DirectSoundError:Error opening wav file SimOjects/Airplanes/Aerosoft Airbus X Extended Base/Sound_ASC/ASC_Avionics_Low Wav! It when I hit okay it keeps going on with more sound errors listed and then CTD. Anybody have this occur before and if so is there a fix? I should mention I also just installed FS2Crew Voice but I wouldn't think that would have to do with anything.

I notice this so far only in the YBBN and YMML scenery. The scenery is quite blurry. I read through the manual and I have it set to FSX native. Is there a way to use the textures I use for HD taxiways etc with REX4? Also I landed at YMML yesterday and as soon as I left the runway, not only were the taxi lines blurry but they were flickering from the blurry lines to a clear ashpalt taxiway that was clear like the standard taxiways but then the apron was blurry again. Any suggestions? I looked into the FTX Aero but I don't want every airport to use those textures just the ones that need it, I already use HD from REX 4 texture on the scenery that allows it.

So I did a fresh reinstall and si far vspeeds,heading and LNAV are work8ng correctly. Now I can enjoy this aircraft! Thanks for the help.

Yeah I do that. On my pfd it shows PIT with a green arrow pointing to left with a green HDG. When I press heading first and then the NAV I get a white LNAV. Maybe I should uninstalling and reinstall. Not sure what else to do. I flew last night way off course and then turned heading to intercept and then selected HDG with a green light next to it but it has no response.

Thank you for the tutorial. I will try it when I get home from work. Would this be a solution for getting the heading to work as well? I opened up citation x 2.0 and we worked perfectly then opened ERJ and tried changing heading and nothing.

I watched those already. Thanks though. I shouldn't be having problems with v speeds, fms and heading. I would understand more if I hadn't read the manual but I did.

Yes. I had FD1 and FD2 highlighted.

Altitude was at FL180. File is 8/2/2006. 128kb. I use megasceneryearth 2.0 and or orbx though.

I will look into that file size and date when I get home. I have tried the direct to my first waypoint as well. No go. As soon as I get home I will check that file you are speaking of. Hope to get this aircraft up and running.

I set that heading for my flight plan before take off. At any point I should be able to use the heading select even if not on the flight plan. That's the strange thing. Many things not working correctly. LNAV, Heading and VS. I set the aircraft to VS 1500FT and it climbs to 6000ft. It is just out of wack.