orcunizma

4 or 5 years ago I merged the Wilco A380 with the PA380 and had no issues at all with worse hardware back then. So I'm guessing too you did something wrong on the merge. Best Regards

What are your SweetFX settings, please? My night is way too bright :( Nice shots! Best Regards

Nevermind, driver issue. Best Regards

Thanks, me too :-) I don't know why but when you think your finally ready to go and FSX is all set, another bug appears. This time it's caused by VSYNC 1/2 and EZDOK giving a slight stutter after switching external views. This issue is been known but haven't found a solution yet, any idea? Works perfectly fine without VSYNC but I wan't to keep it on. Best Regards

It won't make a difference in performance indeed but to prevent buildings to disappear after a long flight Best Regards

HIGHMEMFIX was one thing and STALE_BUFFER the other. Scenery errors didn't appear at first, but after a long flight it may happen that buildings dissappear, by them combined together it never happened for me again. It was seldom yes, but it still could occur and that was reason enough for me to put this tweak in. STALE_BUFFER_THRESHOLD=2147483647 sets a limit, which is set very high so it will not be reached. FSX itself also has one, but it's not set high enough so if it reaches it, you'll get scenery errors that's why you set it up higher like the one provided and your good to go. I thought I'll just put it in aswell because he has this issues. By the way, FSlabs Texture Fix Utility also uses that tweak and I've tried both ways, with and without STALE_BUFFER but only them together really fixed it for me. Teach me if im wrong, I'm always glad to learn something new. Best Regards

Before saying anything bad about the tweak for me it fixed alot of scenery errors such as airport buildings disappearing after a long flight so it DOES make sense! Best Regards

Make sure to put HIGHMEMFIX=1 STALE_BUFFER_THRESHOLD=2147483647 under the [GRAPHICS] section Fixed all scenery problems for me Best Regards

Try adding STALE_BUFFER_THRESHOLD=2147483647 below HIGHMEMFIX=1 in the FSX.cfg Also download and put uiautomationcore.dll http://www.dll-files.com/dllindex/dll-files.shtml?uiautomationcore in the main FSX directory where the .exe is and post your results Best Regards

Turned HT completly off and deleted AM off the .cfg it caused blurries. VSYNC at 1/2 and frames locked and stable at 30. Best Regards

The truth is I didn't even need to set any tweaks in the FSX.cfg and it still was running at 30 FPS locked without problems + all sliders to the max. But im using AM=244 just in case. Best Regards

Alright guys many thanks!!! Finally my problems solved! ^_^ Happy flyings! :-) Best Regards

Alright so AM=244 feels just right or which one would you use? This is the only thing im unsure at about FSX Best Regards

So I will probably use the first one to make the most out of it, thanks for the help. Now the only question is if AM=252 is really that wrong or not Best Regards

I've read it on the internet that AM=252 is 11 11 11 00 are you sure on that? And the system is water cooled and passed huge stress tests without issues I will try those out soon as my FSX is installed. So if I set AM=244 it uses all of the virtual cores except 3 right? Which in the second one only 3 of the cores, and the other 5 being left off Best Regards

AffinityMask to be set at 252? Hyperthreading is on, is this value correct to reach the best performance? Best Regards

Thanks for all the replies, good to hear good things about it ^_^ It's been sold as it is by the company which I choose because of the overclocking and 2 years guarantee on it. Just one last thing, is it okay if I would put the O/S in the HDD and just FSX alone in the SSD? Does it matter much except loading times in Windows? Don't have enough money for a 2nd SSD. Best Regards

Thanks for your suggestion Are you running in DirectX 10 or 9? Do I install both FSX and the O/S in the SSD? Or O/S in the HDD and just FSX alone in the SSD? How did you do it? Best Regards

Hey, since my PC is outdated and I hardly get over 20 fps at medium settings I think I need a new system So I thought about this one... i7-4790K @ 4,4 GHz each core 2x 8 GB DDR3 1600 Crucial Ballistix Sport 3072 MB NVIDIA GTX 780 Ti, Gainward Phant. 2000 GB SATA III, 7.200 250 GB SATA III Samsung 840 Series EVO SSD Windows 7 HP 64 bit What do you think? Any suggestions? Mainly just for FSX. Thanks for help. Best Regards

Looks alot better now doesn't it? Only about 20 FPS though, but it's alright. Happy flyings and thanks again! Best Regards

Thanks for your help, I did everything as you mentioned and it works!!! After some testing I manually added some tweaks to get greater FPS since my system as you said is quite outdated for FSX. I will do a test flight now, thank you alot! Best Regards

Hi, of course Intel Core2 Quad Q9650 @ 3.00GHz 8,0GB RAM DDR2 1066 2048MB HIS Radeon HD 6950 IceQ X Turbo ASUS P5Q Deluxe Mainboard Samsung 300GB HDD 7200rpm Windows 7 Home Premium 64bit Thanks for your reply, I've tried setting it to 0.33 => sadly no success It's all running smooth around the airport, but as soon as I fly over a different place it stops loading the textures. I have no idea what to do and need help from you FSX experts. Best Regards

Thanks for your reply, I've tried it out and it still appears.. hmmm the textures won't even load except the airport area I could fly about 10 minutes in the same area without change, it probably get even worse. Best Regards

I have very big issues with the scenery textures, whenever I fly it doesn't seem to reload the textures and looks blurry! Scenery addons I use: FTX Global, FTX Global Vector & FTX Global openLC europe fsx.cfg Please help, for me it is unflyable this way it looks that bad :( Best Regards

To crank up both engines at the same time! :wub: