Pierre-Jean

Of course. Old Fellow, I just un-installed 777 200/300ER with the 2 installer. And also removed the OC directory, and all instances Rep. or file "PMDG" in the P3D Rep and in the Rep. "Roaming", so everywhere. (Except of course respect FSX) Now the 777-200 / 300R work well and are doing wonderfully in my v2.4 Prepar3D with the beautiful sounds wonderful in 5.1. Finally, I see shadows moving on the dashboard ... Fantastic. Case closed, and thank you for your help Chris. ;-);-);-) Regards, -- Pierre-Jean

Hello Chris, Thanks for your answer ;-) There is something I forgot to say: I use the tool "Migration tool". Okay, I re-uninstall all : OC and 777 P3D via "PMDG 777-200LRF Base Package P3D.exe" (has noted that OC has no uninstaller.) And I'll talk to you here. (I had submit one Ticket in PMDG Support, no response at the moment) Regards, -- Pierre-Jean

Hello Staff, Hi All, After properly install in Prepar3D v2.4, I have no data in Operation Center. ( 777 200/300ER works very fine in Fsx SP2) And so i have this message at launch the 777 with Prepar3D v2.4 : and P3D shut down immediately. And for the OC take a look here : Thank you for your welcome contributions ... I began to be desperate Regards, -- Pierre-Jean

Hello W., Thank you for your opinion. You said : >If you ever activate your 777 in FSX ? Of course, I activated my 777 in FSX. As you say, I deleted these two files: "pmdgsim1_00973800_tsf.data" "pmdgsim1_00973800_tsf.data_backup.001" Don't work. It is always the same, I have the message in P3D v2.4: "The PMDG 777X Does not Support running in Prepar3D Lockheed Martin. The simulator Will now exit" Annoying problem ... (!) No solution in sight ... Regards, - Pierre-Jean

Hello Sirs, I have the same problem as P Freeman "gypsyczar" I was there some days time installed my PMDG 777-200 / 300ER planned for FSX (which works fine in my FSX) in my Prepar3D v2.4. Seeing it not working with Prepar3D v2.4 course I had uninstalled PMDG 777-200 / 300ER in P3D v2.4 (waiting for better days LoL) And now with a new PMDG 777 for P3D I have the same message: "The PMDG 777X Does not Support running in Prepar3D Lockheed Martin. The simulator Will now exit" From my investigations, I think it may be a Windows registry problem? * Kyle(Hello!), for Activation I can not make it because my Prepar3D v2.4 shutdown after the message quoted above ... As said Kyle I will submit a ticket ... Regards, - Pierre-Jean

Hi All, I created this list, is it good ? [ 1 ] PMDG 777-200LRF Base Package RTM.exe [ 2 ] PMDG_777_200LRF_6036_PACK_SP1_.exe [ 3 ] PMDG_777_200LRF_6061_SP1_b_.exe [ 4 ] PMDG 777-200LRF SP1c Update.exe [ 5 ] PMDG_777_300ER__v1.10.6061_EXPANSION_.exe [ 6 ] PMDG 777-300ER SP1c Update.exe Thanks you for your welcome contributions. Regards, -- Pierre-Jean

Yes, I know the system SATCOM Of course I agree with you, there is nothing to simulate. Thank you for your answers! Regards, -- Pierre-Jean

LoL. I simply want to know WHY and the reason it is not operational. Regards, -- Pierre-Jean

Hello Kyle, Oups, I meant : LSK2L <SAT is not in use ... (non-operational) Regards, -- Pierre-Jean

Hello All, Hi Staff, In the FMC MENU page, and LSK2L <SAT is still gray. I read read the docs but I can not find anything about it. ... Thank to you in advance for your help and support. Regards, -- Pierre-Jean

Thank you gentlemen, ^_^ It was good that ... "Flight Test Package" is uncheck in FMC. I have discovered even more realism with this. Fantastic ! :o Best regards, -- Pierre-Jean

Hello there, Hi Staff, These two "antenna" on the tail : ... How is it controlled ?! Thanks in advance. ww.hostingpics.net/viewer.php?id=519973Etrange.jpg][/url] Best regards, -- Pierre-Jean

Hi Luke, Hi Staff, Glad to post here. There is something odd about the "* \ SimObjects \ Airplanes \ PMDG 777-300ER \ folder \sound.surround The sounds are in MONO. Why are they in MONO? There is probably a reason ... What does the PMDG Staff think ? ... I will try something (I love tinkering ;-) I have modified with "Audacity" and I have registered sounds in STEREO. We'll see what it will give ... I had a similar problem with my 5.1 sound card which read not WAV files that were recorded in MONO. A later here sure, I learning with the "alien" T777-300 ;-)))) Regards, - Pierre-Jean

Thanks Stephen, also Thanks Kyle for your explain ! Yes ! It's working now . With the "/" before W or D ... I'have read the technical documents but currently there an other parameters? Thanks. Best regards, -- Peter-John

Hi All, If I enter "W" for set SLOPE/CON, I have "INVALID ENTRY" So what to do now? Thanks. Best Regards, -- Peter-John

cancelled

Hello Guys, Hi Staff, In the Virtual Cockpit with use mouse display info bubble cockpit seems not to work ... When is it you? Thank you for your welcome contribs. Regards, -- Pierre-Jean

Cancelled

Hi Jim, Thank you for your help here ;-). Finally I found something ! I put a "d3d11.dll' file in the directory of P3D v2.1. Looks like it seems to work ! If I do not repost here is that it's good ! Friendly, -- Pierre-Jean

Hello Jim, In first thank you for your reply. You say : Remove SweetFX. I do not have this "SweetFx" on my DD ... ;-) Then... ? Friendly, -- Pierre-Jean

Jim Hello Jim ! It's been ... I also have this problem CRASH " d3d11.dll " But at home I do not have this KB267038 ! Hoping to read, How can I do for resolve this matter ? Sincerely, -- Pierre-Jean

Hello all. The problem of blocking FSX because of "ui.dll" then a few days later with "Simprop.dll" is resolved and was a good adventure and rich in information ... and problem solved. At the time I write these lines I do not know anything about this incident caused by that damn "Ui.dll." I investigated seriously ... I still investigates. Epilogue and conclusion here : http://forum.avsim.net/topic/383818-fsx-uidll-appcrash-a-fatal-error-occured-fsx-done/page__gopid__2459865#entry2459865 Note: It is a question here or there to disable System Restore to write less on SSD Hard Disk. I am careful to disable this option. Sincerely, - Pierre-Jean

It does not matter Jim, thank you for your words! Thank you again soon and hope to read you another time. Best regards, - Pierre-Jean

Thank you for your advice Jim but I followed another track .... Hello Jim. I am very glad. My problem is R-E-S-O-L-V-E-D !! Without touching my FSX ! :-)) Take a look here : First, I started by making a restore point. Then I made one install Repair Upgrad Win 7Pro (une Mise a Niveau) After I found myself with a Windows 7 a bit wobbly, :-( so I made a CHKDSK which corrected minor errors. At that moment, I did a repair of FSX and Accelaration Pack too. That did not work, I still get the error Ui.DLL. I was not discouraged. I said to me Pierre-jean you must find your FSX as it was before, so I continue my investigations with many cups of coffee next to me. Phew big raises ___________;-D) Spark. I put all the drivers up to date. All drivers sure. Because some had status was "uninstall". Some time later after drinking lot of coffee, I downloaded all the updates from Windows Update (Updates number 119) It is done several times because I had some updates was refused. I did some order, and all Updates have finally installed. ;-)))) So given some good ways and paths lost for Applications. Lot of work. Paths lost because of a virtual drive was removed because of the upgrade Win 7 After that, I had a hell cleaning tool "CCleaner" (Register, Applications and Win7) It's really a good job with this tool. Again I made a control with CHKDSK to be on: No error. I did a clean Win 7Pro files with him tool, everything went well ;-)) ************************************************** *********************************************************** Now I run FSX: ERROR! Rhhah. Error Simprop.dLL I said at that time: I will surely come when even to have my FSX. Simprop.Dll, take a look here: ... I controlled my Win7Pro again. No error. Good, i try another way : I repaired yet again FSX and Acceleration Pack ... And now, Yes,YES !!!! I had my on my desk without touching anything in my FSX, it is as before with all Addons. We can say that this was sport. With a lot of coffee, it was not more than a week WAF. ;-) On this, Thanks Jim for me comforted. I stay here often to say "Hello" "" I'm down ":-)) Stay tuned for new adventures. - Pierre-Jean Come support me here http://www.pilote-vi...ic.php?id=46263 http://www.pilote-vi...ic.php?id=44685 In memory of the 6Th R.A.F. Airborne Division in Normandy in June 1944 June Scerarios is coming soon in FSX with the 6Th Airborne RAF Pegasus-Bridge on June 6, 1944.

One thing that I discover with the tool "ProcessMonitor" : I have this Log line just before FSX crashes : | fsx.exe | C:\PROGRA~2\COMMON~1\MICROS~1\DW\ui\SwDRM.dll | PATH NOT FOUND (?) This is very intriguing. This deserves some research ... I am looking for a track here too. Curiously, I have this result only on my machine, not on others. I will soon call a magician :-) -- Pierre-Jean -computersdrivemecrazy