FelipeAbdo

Hi all and thanks for your attention. Roland i did not anything about the fonts , strange! :-) KenG , great test! Thanks... Bui I'm a little confused yet , I need my radar show me where the rain is, then if the Roland Radar takes this direct information from ASN , theoretically it is more accurate than the WXA. Compare my SS, I have a heavy rain at 12 o clock conferring with the ASN and Roland Radar but does not appear in WXA ( same range and same tilt in both radars ) We will keep testing and sharing here. Best regards

Hi all , I would like to share a comparison I made with these two radars. Apparently the Roland Radar was more precise. ( Using Active Sky Next ) Follow screenshots: https://goo.gl/photos/wn3yY7wGda4ZoDnP9 What is your opnion? Best regards Filipe

https://goo.gl/photos/eAMwoQMYkk37BdJD8 ps: Its not possible turn ON and OFF ? Just APPLY button? And to disable effects? Thanks

I use Korn , how i can share my settings file ?

On the website of SweetFX there are 2 profiles to SweetFX 2.0. Doesn´t work?

I agree Richard , i am trying now , again ! No sucess...yet.

Hi all , how i load a preset downloaded on site SweetFX? I tried tried and tried using mediator :( Best regards

Search about LOLA ( Lord of landing ) . ps: Its free

Hi Stans , the reality xp GNS have an option ( LINKGPS=ON ) wich send the flight plan from GNS to default GPS in panel.

Just to confirm , there isn´t a GNS430 integration , only GNS530? Second , if there is no 430 integration , its possible to change the POP UP window with the RXP 430 instead the default 530? Thanks

Just to add more knowledge ( from my manual flight safety CJ3 ) : https://drive.google.com/file/d/0ByNRHBvVL-gONHQycHh0QThTbGc/view?usp=sharing

Hi all , i have a question and need help if this is not normal. In this first shot , the bloom is OFF and apparently i get better visual instead bloom ON. Bloom off https://drive.google.com/file/d/0ByNRHBvVL-gOMWtzRXdQcXAyV28/view?usp=sharing Bloom on https://drive.google.com/file/d/0ByNRHBvVL-gObmhDc1FHai1aUTQ/view?usp=sharing Now , the sun. Bloom off ,a normal sun in my opnion , bloom On a smaller sun stranger Bloom off https://drive.google.com/file/d/0ByNRHBvVL-gOZ1NmZGMtRW5NdTA/view?usp=sharing Bloom on https://drive.google.com/file/d/0ByNRHBvVL-gOZXBJM0d3a0RaT0E/view?usp=sharing I use DX10 fixer , REX4 and sweetFX Thanks for attention Filipe

Dont worry Art and thanks for your attention!!!! I will check each item detailed and try try and try :rolleyes: . I use DX10 too! Best regards Filipe

Thanks for the tips Artur , i will check. Could you send me your preset of SFX to compare?

Apparently i gain more 3~5 frames turning off DPX. Still has a slight difference between SFX ON and OFF but has improved without HDR and DPX... Relative to other reason not SFX , i dont know because this diference occurs only when active SFX. Very thanks Artur

I will try Artpom , thanks! I disable HDR and i had a gain about 7~10 frames. Now i have a diference between SFX on and off about 5~9 frames.

SweetFx ON : https://drive.google.com/file/d/0ByNRHBvVL-gOZWptV2RmalMxNEU/view?usp=sharing SweetFx Off : https://drive.google.com/file/d/0ByNRHBvVL-gOaEJodzNJYlBURXM/view?usp=sharing

Artpom following my settings : #define USE_SMAA_ANTIALIASING 0 #define SMAA_THRESHOLD 0.10 #define SMAA_MAX_SEARCH_STEPS 16 #define SMAA_MAX_SEARCH_STEPS_DIAG 6 #define SMAA_CORNER_ROUNDING 0 #define COLOR_EDGE_DETECTION 1 #define SMAA_DIRECTX9_LINEAR_BLEND 0 #define USE_LUMASHARPEN 0 #define sharp_strength 0.65 #define sharp_clamp 0.04 #define pattern 2 #define offset_bias 1.00 #define show_sharpen 0 #define USE_BLOOM 0 #define BloomThreshold 20.25 #define BloomPower 1.45 #define BloomWidth 0.01 #define USE_HDR 1 #define HDRPower 0.92 #define radius2 0.82 #define USE_TECHNICOLOR 0 #define TechniAmount 0.23 #define TechniPower 4.06 #define redNegativeAmount 0.88 #define greenNegativeAmount 0.88 #define blueNegativeAmount 0.88 #define USE_DPX 1 #define Red 8.00 #define Green 8.00 #define Blue 8.00 #define ColorGamma 2.50 #define DPXSaturation 0.93 #define RedC 0.36 #define GreenC 0.36 #define BlueC 0.34 #define Blend 0.00 #define USE_LIFTGAMMAGAIN 0 #define RGB_Lift float3(1.00,1.00,1.00) #define RGB_Gamma float3(1.00,1.10,1.00) #define RGB_Gain float3(1.00,1.00,1.00) #define USE_TONEMAP 1 #define Gamma 0.52 #define Exposure -0.00 #define Saturation 0.00 #define Bleach 0.00 #define Defog 0.00 #define FogColor float3(0.00,0.00,1.00) #define USE_VIBRANCE 1 #define Vibrance -0.08 #define USE_CURVES 0 #define Curves_contrast -0.20 #define Curves_formula 2 #define USE_SEPIA 0 #define ColorTone float3(1.00,1.00,0.90) #define GreyPower 0.11 #define SepiaPower 0.58 #define USE_VIGNETTE 0 #define VignetteRadius 1.00 #define VignetteAmount -1.00 #define VignetteSlope 8 #define VignetteCenter float2(0.50,0.50) #define USE_DITHER 0 #define USE_SPLITSCREEN 0 #define splitscreen_mode 1 Thanks

JSKorna , i just use windowed mode...i will take screenshots to show! Very thanks guys

Hi all , anybody have loss of frame rate when turn on the sweetFX effects? I lose about 10-20 frames. Thanks Filipe

First thanks for your attention , had great value to me , to make a decision! I bought FSCAPTAIN yesterday and its great! Lets fly :-) Best regards Filipe

Hi...i would like to buy a new program and my options are FSC or Ideal Flight. I wanted to know the opnion of you about this. Its possible use both with FSECONOMY? Best regards Filipe

Its normal we have a hit of 30 - 50 fps when sweetFX is enable? I got this one even using sweetfx on without any options enable ( to make a test ) . Thanks for attention ps: I did not know if this is the correct subforum to post , sorry

i didnt found the link to download in Bryns page! Thanks and congratulations Bryn