TristanAbyss

Hi Folks, can anyone advise how to use this in MSFS2024? I linked all FS Traffic folders with Addon Linker to 2024, but no Traffic to be seen... Thanks in advance, Tristan

Hmmm, quite difficult.. The 145 is a small heli, very managable and agile.More suitable for short legs. The 160 is quite a big boy and has a retractable wheel gear, which makes it easy to roll onto taxiways in larger airports. It is quite fast, up to 160 mph in cruise, so well equipped for medium range hops. Both have a very good autopilot, which make it IFR capable and ILS landings are possible. Sooo, i love them both and cant make a decision, which I prefer... There are very good youtube videos of both, maybe they can help you decide ( e.g. creators Jaydee or Theflyingdoctor). 😉 Tris

Hi Guys, HPG Group has a sale on their website: H145 for 34,99 instead of 49,99 H145 Action pack for 29,99 instead of 39,99 H160 for 39,99 instead of 49,99 Hot Air Ballon for 9,99 instead of 19,99 I own the H145 and the H160 and they are awesome helicopters to fly some sightseeing! Regards, Tris

Hi Ryan, very nice shots. Due to your topic I purchased it today and I love it. But I have maybe a dummy question: Does the H130 have an Autopilot? And if so, how to activate it? Thank you, Tris

Hi, this works very well for me, even on my 2070ti-card. The only problem I have is with the Fenix A320. I choose it on the World map, choose my airport and start it. Then in the loading window the fenix app starts as normal, but then MSFS got stuck and I never get to the "Fly Now"-screen. This only happens with the Fenix. PMDG, Flybywire, ATR, E-Jets, A310, FSR, Hondajet etc. all work perfectly.. Anyone has some suggestions? Thanks in advance and Happy Holidays! Tris

Hi, all Fsdt airports are working fine in P3D, even in v3. Just make sure you havedownloaded the most recent standalone addon manager from the fsdreamteam website. Tris

Hi Guys, I am currently running P3D 2.5, but after reading about all the improvements I chose to upgrade to V3 in the near future. But I got a little confused while thinking about mesh, autogen, landclass and regions.... In P3D2.5 I am using FSS Global 2010, ORBX Global Base, ORBX Vector, ORBX Open LC Europe and NA, several ORBX regions like Pacific Fjords and more of them. For V3 I am thinking about getting GEP3d for autogen and ground textures because of its stunning looks. I learned, that I must not use ORBX Global Base wit GEP3d. So far, so good. But is it necessary/possible/ would you suggest to use ORBX Vector, ORBX Open LC and all of the ORBX regions? And which mesh product would you suggest? Still FSS Global? Thank you in advance for your help/suggestions. best regards, Tris

Hi, with the help of the masjestic support I was able to solve the problem: It was a copy protection issue. Since my operating system is different (Windows10 now, 8.1 before), the previous Q400 install is invalid. I deinstalled the q400, downloaded the 1.016 Full installer from majestic and installed it. Now everything works as expected. Thanks again for all your help, Tris

Marshall, I tried the slewmode , but no success.... Ezdok is not installed. Anymore advice? Thank you in advance, Tris

Hi Guys, I recently upgraded to Windows 10 and after a few problems P3D 2.5 now works well with all addons, but.... I upgraded the Q400 with the 1.016 patch and now everytime I load it on any airport, it bounces up and down, so that the IRS will not align and all monitors had this bouncing shown on all the values like level, QNH, even Oil pressure bounces up and down. Unlike the well known bouncing issue from some times ago, this will not stop after a few seconds, but continues on and on. Anyone able to help me? Thank you in advance, Tris

Unfortunately all hints and tips did not work with my rig. Therefore I downgraded back to Windows 8.1. Now everything works again. Thank you all for the help. Tris

Hi Guys, today I upgraded to Windows 10 and everything went well. But due to P3D I got a problem: everytime I start P3D I choose a plane and airport and start it. Plane and airport are loaded as usual, but a few seconds after everything is loaded, P3D crashes to desktop. Windows event manager shows: Name der fehlerhaften Anwendung: prepar3d.exe, Version: 2.5.12946.0, Zeitstempel: 0x555f2e54 Name des fehlerhaften Moduls: menus.dll, Version: 2.5.12946.0, Zeitstempel: 0x555f2d41 Ausnahmecode: 0xc0000005 Fehleroffset: 0x000050e0 ID des fehlerhaften Prozesses: 0x1bd4 Startzeit der fehlerhaften Anwendung: 0x01d0ca3e104fa590 Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\prepar3d.exe Anyone got a hint for me, what went wrong? Thank you in advance. Tris

Hi Guys, first thank you to FlyTampa for this update. But unfortunately I got an issue: I downloaded the new version (via Aerosoft), installed it and all seems quite normal. But after installing it I now get a P3D application error, everytime I try to start it. There is no difference if Vienna is activated in the scenery library or not. Windows said: Name der fehlerhaften Anwendung: prepar3d.exe, Version: 2.5.12945.0, Zeitstempel: 0x55145f5e Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000 Ausnahmecode: 0xc0000005 Fehleroffset: 0x0000690c ID des fehlerhaften Prozesses: 0x76c Startzeit der fehlerhaften Anwendung: 0x01d0b8f5b01a7681 Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\prepar3d.exe Pfad des fehlerhaften Moduls: unknown P3D worked well before, and the only thing I changed was the installing of Vienna 2.6. Do you have any clue what went wrong? I tried uninstalling Vienna , but the application error remains. Thank you very much in advance. Tris

Dear Guys, I am currently running my P3D on Windows 8.1. Am I correct that the upgrade to Windows 10 will probably not require a complete new install of P3D? It would be a real nightmare to reinstall all those addons.... :blink: Thanks in advance, Tris

Hello, guess what: I solved the problem myself! It was connected with the Windows firewall. I deinstalled F1GTN and GTN trainer, and deleted all remaining files and folders, than I switched off my firewall completely. I redownloaded the GTN750 and the trainer and reinstalled all with the firewall off. Afterward I switched the firewall on again and tried the GTN. And now it works!! Nevertheless I just want to thank the F1 support team for their quick responses and provided help. There are not much providers with such exceptional customer service! my best regards, Tris