BenzAmg

I mean is the same as prior version,visually is completely exact the same inside the cockpit. The cabin and exterior are improved,totally a waste of money IMHO.

Totally agree,for me visually speaking the cockpit totally is the same...

It´s the fu****ng same almost in the whole cockpit (visually speaking). word not allowed!.

Guys what preset uses more VRAM (fs2024),M,K or B???,i dont use DLAA for antialiasing,only TAA and MFG 3X and now testing with 6X. The profile doesn´t affects me if i´m using TAA?,or it has impact ´cause i´m using MFG???. Very curious....

Hi!,im just wondering why in dev mode i get nice and stable FPS and a Green Mainthread unlimited but after passing lets say 20-30 second Mainthread begins to load Up and become on red my FPS drops 20-30 FPS less(not moving or touching anything in cockpit) but if i change my view to overhead or pedestal or pax wingviews It recovers again and when going to cockpit view the Mainthread is ok but after passing 30 seconds It becomes again to load Up Mainthread... FS2024 9980X3D 64MB RAM RTX5080 A mixture of high and ultra settings but texture res is on HIGH,also using FG without problems... Thanks for any info

This was just vacating runway after landing,w+e anti ice was on below 10.000ft because we met ice conditions,the failure was not showed in fenix failures panel,only in fs2024.

Wondering if anyone is experiencing a “system malfunction-engine malfunction” fs2024 error with Fenix buses. Sitting at an airport with real wx and very low vis and clouds base triggers a wear and tear increasing looking at dev mode and triggering fast count to lead this finally message and error. If I set manual wx and skies clear it solves by itself…

Hi,I don’t remember if previous beta shows this issue,but with last fs2024 beta,every time I open EFB I can see a lot of ghost traffics around me,plus the online traffics as well. I’d deactivated all multiplayer options and on graphics section also all traffic and services on airports. Visually only can see online traffic when online on VATSIM,but not ghost traffics because only appears on EFB not visually. Would be possible all this ghost traffics are making a CPU demanding impact on my end???. For clarification I only have FSLTL for VATSIM and Ivao CSL on external folders that I activated or deactivated only when online flying,but this also appears with those libraries deactivated. Very curious…

Yes….jajaja and still struggling with this and trying to get any help or light to solve this,because is driving me crazy,really.

Negative mate!,only LSZH from mkstudios and sometimes the fsdreamteam one deactivating the other one and making some test with same cathastrophic result….

Hi folks,what in the world happens only when overflying LSZH???,at cruise altitude,I get a huge spike in my GPU VRAM and collapses looking in dev mode… Only happens in Swiss airspace,I may fly London,Frankfurt,Dubái,New York WITHOUT any problem… Driving me crazy…. Fs2024 last SU4 beta and deleted on the market place all POI of German and Swiss territory….

I will give a try…. Thank you Virtualstuff.

Hi MarcG.i disabled Points of interest over Switzerland,and city updates package (it covers;germany,swiss and some near countries...). Is a problem for me because it riuns all my simulation experience,very frustrating getting on the ground of a big addon airport with a payware aircraft very nice and fluid performance,but as soon as i pass from let´s say 24000 it becomes to leak my VRAM to red numbers on DEV MODE. Still looking for a solution. Thank you to you and other fellas trying to help me.

Yes mate….

Thanks guys!!! Now I have a clear idea.

I’m sorry obviously FS2024, at 3440x1440 full screen.

Hi!,still investigating my VRAM leak issue,but I kindly request info to know what TLOD are you using at high level altitudes over big cities. Over the islands I can set TLOD400 without any problems….but over big cities I found that TLOD250 is the limit to prevent VRAM leak. FS2024,9959X3D,64MBRAM,5080. Very curious to know your TLOD setting on cruise and your system specs… Thanks!

More testing guys… I’d checked and climbed from LSZH on a holding pattern over airport up to FL340. Full Cleaning Community folder With standard LSZH airport With MKStudios LSZH With FSDTeam LSZH With default airbus With Fenix A320 Searching and deactivating all entries with “LSZH”,”SWISS”,””ZURICH” and also interesting points on Switzerland inside de marketplace library. Nothing works,as ever nice and fluid at ground even on addon airport but when climbing to FL340-360 my VRAM leaks to fully red and triggers VRAM message. This is driving me crazy…!!! With a “conservative” TLOD on AutoFPS from 100 ‘till 1000ft base on ground and 300 passing 5000ft when airborne… Checking another Swiss airport like LSGG,can climb in a holding pattern over airport to FL340-360-380 with a little VRAM spiking to a low yellow value on devmode when go to cabin window view but after set to main cockpit view again it stabilizes to a normal-soft high value without problems…

Thank you very much,I use addonslinker,and I’d tried with and without FSDT LSZH and MK studios LSZH one at a time and default fs2024 scenery but still the same. Anyway I will try your suggestion but on my community folder only have navigraph,fenix busses….

I think my problem is overflying the Alps,those mountains totally broke my VRAM comsumption… Can anybody confirm this checking VRAM over the Alps mountain please?

Upsss sorry mate,is FS2024 with addon airports EDDF,LKPR,LSZH,EGLL nice fps on ground but when overflying the zone/city at cruise level my VRAM spikes and enter in red zone(dev mode) full gpumem consumption.Sstrange that on the ground at the ramp the VRAM goes into yellow or remains on white zone and all is ok… Any light? And for capping FPS the best way is set 60FPS inside fs2024 menu?. i think in my rig is performing better without fps limiter…

Upsss sorry mate,is FS2024 with addon airports EDDF,LKPR,LSZH,EGLL nice fps on ground but when overflying the zone/city at cruise level my VRAM spikes and enter in red zone(dev mode) full gpumem consumption.Sstrange that on the ground at the ramp the VRAM goes into yellow or remains on white zone and all is ok… Any light? And for capping FPS the best way is set 60FPS inside fs2024 menu?. i think in my rig is performing better without fps limiter…

Hi,please help me,I’m getting good performance and VRAM managing on the ground on a major airport like aerosoft EDDF,changing views,panning camera in cockpit and taxiing,very nice and smooth but….. When reaching FL320/380 (cruising)from EDDF to LSZH when overflying LSZH my VRAM goes to red in dev mode and collapses,checking on the ramp in fsdreamteam LSZH or MK LSZH my sim performs very nice… Ground TLOD 100-150 and passing 5000ft TLOD 300 with msfs autofps. Flying over Greece islands,Canary Islands or New Zealand even Spain I can set my TLOD +400 airborne without VRAM problems,this only occurs over EU major cities at cruise levels. Not bad specs; AMD Ryzer 9 9950X3D 64MB RAM RTX 5080 using MFG X3 or X4 using nvidia panel and vsync on also capping at my 34” screen (frec 160hz) I get stables 160fps all the time,the only problem is VRAM leaks to red zone overflying at cruise levels Swiss and other big cities,but NOT when at ground on any big airports… This is driving me crazy.Any help will be VERY appreciated. Thanks guys!.

Anybody experiencing VRAM overflow spiking at cruise with latest beta???. Tried a flight from EDDF-LSZH was totally painful as VRAM spikes and get a CTD. Ryzer 9 9950X3D 64MB RAM RTX5080

It seems jetways finally are working again,testing at my local airport,anybody can confirm this please?????