Jump to content
Sign in to follow this  
Raphael_Chacon

LJ35A V1.6 - No Lights/Steering after Landing

Recommended Posts

Hello Boys,

 

 

Have you noticed that sometimes you just can not steer the front wheel after landing?

 

I Think this starts before landing.  I Notice that the 3 red lights from the Landing gear, remain in red even after the gears are down.....  the manual talk about an unsafe condition, but.....  i know im not above the speed for extention(Or may be there is something im not conscious of), the matter is that, everytime that happens, after landing i can not steer the front wheel and i dont have lights....

 

Some pictures:

 

1- The Unsafe 3 red lights remain ON during normal landing procedure(In the final approach).   In this picture i just landed, and the green lights are  activated because i was hitting the test button, but i culd not turn that off no matter what i did.

 

2bc4e05a4ff8eb448f885b5f72b71e58.jpg

 

 

2-  If i got this behavior before landing, then i have no lights after landing.  Dont know if they are related:

 

d96e30be52387941c0f447789f8a631f.jpg

 

 

 

3-  But after pressing the repair button, i recover all the control back, even the steering...

 

 

0ca2bd732dd29947871b1b374e9ab6cd.jpg

 

 

 That is happening randomly i think... Will perform another flight and check if that continues.

 

 

 

Thanks in advance for support,

 

 

 

 

 

 

 


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
Share on other sites

Hey, we have not been able to replicate this error. Can you remind me of your system specs and sim version?


Matt Bernard
20+ Years Commercial/GA A&P/PLST

Share this post


Link to post
Share on other sites

Hey,

 

I use Win7 64 bits.   i5 650 3.6Ghz / 580GTX / 8GB RAM

 

I updated to V1.7 and i just performed one flight with V1.7, everything ok until now.    If i get the same error sometime i will let you know.   For the while, i was not able to detect specific conditions to recreate this errors.  It just has hapened a couple of times during V1.5 to V1.6, flying to Default airports.

 

Thanks...


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
Share on other sites

405GJ,

Thanks for creating this bird! Upon landing, I am unable to access NWS, consistently. Running:

 

Win 7 64-bit, no UAC

P3D v3 Pro; very clean install

Lear v1.6

Saitek yoke and panels

 

NWS works perfectly at first, during taxi and TO. Upon touchdown, NWS is not present and cannot be activated.

 

Any chance we can get PC Aviator to the latest version?

 

Thanks for your work.

 

PS: After a Lear flight, P3D generates content errors in the log. I can send you the log if you like.

 

 

Best,

Mark


Best Regards,

Mark

 

i7 10700KF 3.8gHz -125W air cooled, 500W PSU, 4070 Dual OC 12GB, 16GB 3200, 43" P4317Q

Redbird Alloy RD1, Honeycomb Alpha, Bravo, Stream Deck

Share this post


Link to post
Share on other sites

I would upgrade to V1.7

 

Remove V1.6 and try a fresh install for V1.7.    Configure all your controls through FSUIPC(Latest Version) - Specifically Tailhook command to your saitek Throtle, and see what happens...

 

Happy Flying :wink:


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
Share on other sites

Flysimware: Can you supply PCAviator with the latest rev of the Lear? They currently have 1.6 and are my only source for updates.

 

Regarding the NWS loss at landing, I tried to think it through.

 

It could just be P3D v3 specific?

 

I wondered if the Saitek landing gear multi-panel may be a problem. I disconnected both panels last night. Upon touchdown, I can "tailhook" the steering light on, but still have no NWS steering control.

 

 

 

 

Thank you!

Mark


Best Regards,

Mark

 

i7 10700KF 3.8gHz -125W air cooled, 500W PSU, 4070 Dual OC 12GB, 16GB 3200, 43" P4317Q

Redbird Alloy RD1, Honeycomb Alpha, Bravo, Stream Deck

Share this post


Link to post
Share on other sites

NWS does work in P3D V3, it is not used above 45 knots during take off or landing rollout. 


Gary Stewart

Share this post


Link to post
Share on other sites

Hey Mark,

 

 

I had those issues when first flew the Learjet.   During very hard landing test, apparently the aircraft gets damage so the button wont release the steering.   I bet that is "RepairsRefill" Button for...  ;-)

 

After V1.7, im able to land the aircraft succesfully after a more precise flight.  Do not extend Gears above its maimun extention speed, do not land too hard.  After those cautions, the V1.7 works perfectly.

 

 

Hope it works for you...


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
Share on other sites

Hey Mark,

 

 

I had those issues when first flew the Learjet.   During very hard landing test, apparently the aircraft gets damage so the button wont release the steering.   I bet that is "RepairsRefill" Button for...  ;-)

 

After V1.7, im able to land the aircraft succesfully after a more precise flight.  Do not extend Gears above its maimun extention speed, do not land too hard.  After those cautions, the V1.7 works perfectly.

 

 

Hope it works for you...

Well, that first landing was a little squirrelly. On landing, sink rate, spool times all seem ok, but pitch/yaw seemed overly sensitive. Although, I never flew a Lear. I Probably need more hours in it.

 

Would love to get v1.7 but PCAviator still has 1.6.

 

Back in the cockpit tonight for a repair and a few greased landings!

 

Thanks for your help.


Best Regards,

Mark

 

i7 10700KF 3.8gHz -125W air cooled, 500W PSU, 4070 Dual OC 12GB, 16GB 3200, 43" P4317Q

Redbird Alloy RD1, Honeycomb Alpha, Bravo, Stream Deck

Share this post


Link to post
Share on other sites

V1.7 updated the steer lock system as the keyboard assignment tailhook could be clicked above 45 knots and this was not correct. The new version the steer lock is bug free.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...