Hi,Is it possible to use FSBuild with Active Sky Evolution?. I read some online instructions that allows this but I am unable to get it to work.Here is what I've done.1. I set Active Sky 6 export directory path is as follows: C:\USERS\MICHAEL\APPDATA\ROAMING\HIFI\ASE\WEATHER Note: This is where I download Active Sky Evolution's current_wx_snapshot.2. Checked Apply Winds Aloft Data in FSbuild's Settings section.3. Saved FSBuilds configuration.4. Restarted FSBuild and confirmed the above data was still applied, it was.5. Exit FSBuild.6. I started Active Sky Evolution and downloaded the latest weather.7. Confirmed that the file current_wx_snapshot was in the following directory C:\USERS\MICHAEL\APPDATA\ROAMING\HIFI\ASE\WEATHER8. Started FSBuild.9. Created A Flight Plan.10. No Winds, all state zero.Am I missing something here?.ThanksMike

Mike, I had not heard that FSBuild and ASE interacted, but I do not use FSBuild. Do you have "Disable winds aloft" unchecked in ASE?Jim Skorna might pick up on this thread in this forum, but you might consider posting in the HiFi Simulation Software forum here at AVSIM.

Hi Mike,I have ASE and fsbuild and confirm I get winds in the flight plan as you can see:(although copy and paste has screwed up the formatting :( ,winds shown in bold) FSBUILD FLIGHT PLANFLT REL IFR EGNT-07/EGLL-27R MACH 80 A/C B767-300ER W/ PW4060 FUEL TIME CORR TOGWT LDGWT AVG W/CTAXI 000000 0000 . . . . 283785 274553 M010DEST EGLL 009232 0041 . . . . ELEV. 80 FTRESV 009447 0045 . . . .ALTN 003306 0015 . . . . ALTN EGKK DIST 22HOLD 000000 0000 . . . .EXTRA 000000 0000 . . . . ZFW 261800 PAYLOAD 050000TTL AT TO 021985 0141 . . . . DIST 0242REQD 021985 0141 . . . . ETDCLB BIAS 0.0% CRZ BIAS 0.0% DSC BIAS 0.0%DEP BIAS 0 MIN 0 DIST 0 FUEL, ARR BIAS 0 MIN 500 FUELEGNT TILNI GASKO RIBEL UY99 CROFT MCT EGLL/0041 M/H FL WIND ATCTO NM AWY M/C TAS G/S ZT ACTME ETA ATA ACBO ABO REM AREM N5432.8/W0151.2 189 CLB 098026 LONTILNI 031 DCT 193 342 336 00/05 00/05 .../... 0023/... 0196/... N5413.4/W0157.3 189 CLB 131028 LONGASKO 019 DCT 193 342 328 00/03 00/08 .../... 0039/... 0180/... N5400.9/W0217.3 225 CLB 220019 LONRIBEL 018 DCT 225 342 324 00/03 00/12 .../... 0053/... 0166/... N5356.3/W0220.8 205 CLB 226022 LONTOC 005 UY99 204 342 323 00/00 00/13 .../... 0057/... 0162/... N5337.6/W0232.3 204 250 211022 LONCROFT 014 UY99 204 482 473 00/01 00/14 .../... 0061/... 0158/... N5321.4/W0215.7 152 250 211022 LONMCT 113.55 019 DCT 150 482 473 00/02 00/17 .../... 0066/... 0153/... N5247.8/W0142.3 155 250 211022 LONTOD 039 DCT 153 482 472 00/05 00/22 .../... 0076/... 0143/... N5128.2/W0027.1 153 DSC 205022 LONEGLL 091 DCT 149 300 291 00/18 00/41 .../... 0092/... 0127/...Have you got "as6" showing in the options and settings tab as well as winds aloft ticked?The only other thing I always do is run both programs as administrator as I'm running win 7 64bit.If I can help any further please let me know.CheersSteve

menu bar on top-> Build Options-> Apply winds aloft data Did you tick that ?

it worked fine for me under winXP but i have been unable to get it working under win7 64bit. is it possible you are using windows 7 also?i tried the instructions, went to the settings i used to use when i had it working before, manually edited config files, etc, and it just never seems to find the values even though the directories all point to the correct places. i so far thought it was maybe something wrong with my win7 security settings..perhaps it is a similar configuration issue on your system that i could learn from??. i haven't really had time to thoroughly investigate it yet.good luck,i miss this feature a lot cheers-andy crosbyEDIT: oh , i saw your OS in your sig. maybe it is a windows 7 or 64bit issue or something like that. i had them working perfectly on my old xp computer...

Hi,Well, I finally got it working. I still don't know what the problem was, I started from scratch and followed the same setps of installation.Now it works, go figure...

*SNIP*Have you got "as6" showing in the options and settings tab as well as winds aloft ticked?*SNIP*

Hi.Sorry for bumping this, but I got the same problems as OP had so I figured it was better to bump than to start a new thread.Anyhow, I can't see "AS6"(I got ASE) in the options and settings tab, nor in the "export to..." menu at the top of the screen. Any ideas how to solve this? I'm running FSBUILD 2.3.1

Yes ASE and FSBuild work together, I use it on every flight. There is a little confusion about what to tick inside of FSBuild, but follow these instructions that Ernie sent me when I could not get it to work.: http://www.fsbuild.com/forum/viewtopic.php?p=11796#p11796Hope this helpsBob