Archived

This topic is now archived and is closed to further replies.

cubpilot78

Missing sounds

Recommended Posts

Hello Bryan,I just purchased and installed the FS2Crew for iFly and encountered the following:I'm running the preflight events with US crew voices. At +8 mins before departure someone is arriving with a load sheet (or at least, it seems to be a dialouge there). However, there is no sound, I can only hear the captain say "thanks" when I click the secondary button (no sound from the person coming in with the loadsheet). Also, I'm unable to hear the start crew (no sound, execpt for the captain's responses, like "parking brake set", "brakes released")I am running FS9, Win7 Ultimate 64bit. Regards,Kyrre AndersenNorway

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Hello Bryan,I just purchased and installed the FS2Crew for iFly and encountered the following:I'm running the preflight events with US crew voices. At +8 mins before departure someone is arriving with a load sheet (or at least, it seems to be a dialouge there). However, there is no sound, I can only hear the captain say "thanks" when I click the secondary button (no sound from the person coming in with the loadsheet). Also, I'm unable to hear the start crew (no sound, execpt for the captain's responses, like "parking brake set", "brakes released")I am running FS9, Win7 Ultimate 64bit. Regards,Kyrre AndersenNorway
Hmmmm, I use Win 7 64, too.Is it just those sounds? What about all the other sounds?Try unselecting HS as a test on the FS2Crew Main Panel.Cheers,

Share this post


Link to post
Share on other sites
Hmmmm, I use Win 7 64, too.Is it just those sounds? What about all the other sounds?Try unselecting HS as a test on the FS2Crew Main Panel.Cheers,
Hello,I've just tried a sample flight with unselecting 'HS'. The sounds are still not present (including the "chocks in" sound upon arrival). However, other sounds play fine.Regards,Kyrre AndersenNorway
Hmmmm, I use Win 7 64, too.Is it just those sounds? What about all the other sounds?Try unselecting HS as a test on the FS2Crew Main Panel.Cheers,
Hello,I've just tried a sample flight with unselecting 'HS'. The sounds are still not present (including the "chocks in" sound upon arrival). However, other sounds play fine.Regards,Kyrre AndersenNorway

Share this post


Link to post
Share on other sites

HiI've got exactly the same problem.But the HS was never selected. The only thing I'm not sure about is that I selected in the audio setup the one which said "loudspeakers". There are two more devices which I don't know, so maybe there's the error...Everything else works perfectly and it's a great product!!ThanksKevin

Share this post


Link to post
Share on other sites

Same problem with missing sounds here as well. HS never touched. I also get an error every time I change between Ifly aircrafts or upon exiting FS with Ifly+Fs2Crew:"FeilsignaturAppName:fs9.exe AppVer:9.1.0.40901 ModName:gdiplus.dllModVer:5.2.6001.22319 Offset:000184bd"Disabling Fs2Crew entries in the panel.cfg makes no errors.

Share this post


Link to post
Share on other sites

Kevin and Kyrre,So I can try to reproduce, I need to know:1. Which airport you were at.2. Which Voice Set was selected on the FS2Crew CFG panel.Thanks!

Share this post


Link to post
Share on other sites
Kevin and Kyrre,So I can try to reproduce, I need to know:1. Which airport you were at.2. Which Voice Set was selected on the FS2Crew CFG panel.Thanks!
Hello again,1. Airport: ENZV2. Selected Voice set: EURegardsKyrre AndersenNorway

Share this post


Link to post
Share on other sites

1. Airport: ESSA, EGKK, ENBR2. Selected voice set: US (I'll open a new thread on my other issue. Sorry for that.)

Share this post


Link to post
Share on other sites
1. Airport: ESSA, EGKK, ENBR2. Selected voice set: US (I'll open a new thread on my other issue. Sorry for that.)
Hi Rune,The GDI plus error when you exit Flight Simulator was never experienced during testing. I suspect it may be XP related. Maybe. A 1000 different things can cause those errors.I'll try to reproduce your issue with the missing sounds.Cheers,Kyrre,Please confirm it's only the 'chocks in' sound you're missing.Cheers,

Share this post


Link to post
Share on other sites

HiI wrote you an e-mail bryan as you requested.But again to complete it here:1. Airports: LSZH( with AES on),EFHK (with AES off)2: Soundset: both EU3. which sounds: everything what ground crew says.Could it be that we make some error in the order of commands, so that the programm hangs up and doesn't play the sounfiles anymore?RegardsKevin

Share this post


Link to post
Share on other sites

Hi Kevin,I replied to your email.I suspect the issue is an audio setup problem, but I won't know until you run the test I asked you to perform.Cheers,

Share this post


Link to post
Share on other sites

Hi Bryan,first of all a want to say thank you for this great addon. I have three little problems with that (maybe I missed something in procedure or i dont know).Sounds - cant hear sounds as described above - Load sheed and ground crew. EU voice set. 737 -900( other types not tested) Flt LKPR-LKMT gate 23 with addon scenery LKPR/ LKMT - tested w and w/o headsetVideo Marshaller doesnt work in full screen mode (antialiasing off) - FS fall to trayUnits - Push back lenght is measured in feets, any chance to switch it in to meters? Thanks for any suggestions.System: FS 9.1, Win Vista 32bit, UAC off

Share this post


Link to post
Share on other sites
Hi Bryan,first of all a want to say thank you for this great addon. I have three little problems with that (maybe I missed something in procedure or i dont know).Sounds - cant hear sounds as described above - Load sheed and ground crew. EU voice set. 737 -900( other types not tested) Flt LKPR-LKMT gate 23 with addon scenery LKPR/ LKMT - tested w and w/o headsetVideo Marshaller doesnt work in full screen mode (antialiasing off) - FS fall to trayUnits - Push back lenght is measured in feets, any chance to switch it in to meters? Thanks for any suggestions.System: FS 9.1, Win Vista 32bit, UAC off
Hi,For the Video Marshaller, you probably have an issue with Windows Media Player.Make sure Windows Media player is installed and in working order.As for the ground crew sounds that aren't playing, I'm still trying to figure out why this is happening to some of you.If you're ground crew sounds aren't playing, please contact me via the Contact Page on the FS2Crew website. If I can get enough of you I should be able to spot the common denominator and fix the prob.It works for me (and you saw it working in the video), so I suspect the issue is procedural or something.Cheers,

Share this post


Link to post
Share on other sites

UPDATE on Sounds...Okay, a few of you reported that some Start Crew and Ground Crew sounds weren't playing.I think I identified and fixed the issue.Since I could never reproduce it, I have to have the people who reported it test it personally.Why did it happen? It's just one of those things were, like people, not all computers behave the same way.If all is okay, I'll release a hotfix shortly.EDIT: Okay, I think I definitely nailed it :( Cheers,

Share this post


Link to post
Share on other sites

Hello!I'm having the same problems as others, expect my marshaller works nicely. Only problem is those missing sounds of ground personnel :( Happens on every airport, i use EU soundset without headset and os ís Windows 7 64bit PremiumHope you have solution for this :( Greets,

Share this post


Link to post
Share on other sites
Hello!I'm having the same problems as others, expect my marshaller works nicely. Only problem is those missing sounds of ground personnel :( Happens on every airport, i use EU soundset without headset and os ís Windows 7 64bit PremiumHope you have solution for this :( Greets,
Hi,Yes, I fixed it. It's a problem that affected select areas in certain parts of the world.That's why we never experienced it during testing.The problem is now fixed and V1.1 will be released shortly.V1.1 also makes a few other changes.Cheers,

Share this post


Link to post
Share on other sites
Hi,Yes, I fixed it. It's a problem that affected select areas in certain parts of the world.That's why we never experienced it during testing.The problem is now fixed and V1.1 will be released shortly.V1.1 also makes a few other changes.Cheers,
Great, thanks for a fix :( Greets,

Share this post


Link to post
Share on other sites
Any news on when the update is coming?
Probably in 24 hours.I'm adding a new feature to it.... "Bleeds off landings" and making some other minor tweaks.Cheers,

Share this post


Link to post
Share on other sites
Probably in 24 hours.I'm adding a new feature to it.... "Bleeds off landings" and making some other minor tweaks.Cheers,
Awesome. Looking forward to it.

Share this post


Link to post
Share on other sites
Awesome. Looking forward to it.
I just released V1.1 which should fix this issue.Please check the sticky thread on top for V1.1 info.Cheers,

Share this post


Link to post
Share on other sites