March 1, 20179 yr Good sir, would you mind sharing the process for this ? Thats great!! Alberto Ferracuti
March 1, 20179 yr [Vcockpit03] Background_color=0,0,0 size_mm=512,512 visible=0 pixel_size=1024,1024 texture=$Panel_baron_3 gauge00=F1GTN!GTN650, 173,72,328,166,UNIT1.VC gauge01=F1GTN!GTN650, 173,252,328,166,UNIT2.VC gauge02=Bendix_King_Radio!Bendix-King Radio ADF, 174, 430, 328, 74 .... or substitute your favorite ADF gauge Bert
March 1, 20179 yr Thank you Bert, could you include the peanut ADF indicator in lieu of the suction gauge config input please ? sorry to be such a pain. Alberto Ferracuti
March 1, 20179 yr [Vcockpit02] ... gauge00=BB58!prop_amps, 372,385,135,124 gauge01=BB58!CHT_EGT, 388,28,119,118 gauge02=BB58!Manifold, 390,265,117,117 //gauge03=BB58!Gyro, 126,391,118,118 gauge03=Cessna!ADF, 126,391,118,118 ... Bert
March 1, 20179 yr Bert, I have place this gauge where you said to put the ADF (vacuum air gauge) KingAir!Turn_Coordinator, 126,391,118,118 And OK there I would also like to remove the big 3 inch turn coordinator (no longer needed), and put this gauge in its place KingAir!Rmi leaving the numbers as they are. It is not working and I would like that RMI there because I like that setup better can you assist me please ? Alberto Ferracuti
March 1, 20179 yr 42 minutes ago, ALF1 said: Bert, I have place this gauge where you said to put the ADF (vacuum air gauge) KingAir!Turn_Coordinator, 126,391,118,118 And OK there I would also like to remove the big 3 inch turn coordinator (no longer needed), and put this gauge in its place KingAir!Rmi leaving the numbers as they are. It is not working and I would like that RMI there because I like that setup better can you assist me please ? There are very few things you can change in that panel, and that is not one of them... Bert
November 7, 20178 yr On 28/2/2017 at 1:17 PM, ALF1 said: TC and GTN brought my 58 to life in the sim, so I wanted to bump this and ask again if there is a solution. We used to have two ADF's in the 80s here on twins. I have seen Bert has an ADF in lieu of the 2 inch suction gauge, but how does he get an indication without the radio ? Me too, TC and RMI did brought the 58 to life again. I replaced the Fuel totalizer with a RMI and Gem6 with the Fuel totalizer.
December 24, 20196 yr On 3/1/2017 at 12:37 AM, Bert Pieke said: [Vcockpit03] Background_color=0,0,0 size_mm=512,512 visible=0 pixel_size=1024,1024 texture=$Panel_baron_3 gauge00=F1GTN!GTN650, 173,72,328,166,UNIT1.VC gauge01=F1GTN!GTN650, 173,252,328,166,UNIT2.VC gauge02=Bendix_King_Radio!Bendix-King Radio ADF, 174, 430, 328, 74 .... or substitute your favorite ADF gauge Hello all, Bump.... I have the Carenado Twin Otter Extended and have just purchased their B58 Baron. 😬 I am extremely disappointed there is no ADF or indicator, it is such a shame because the airframe is fantastic and a beautifully crafted model. Can anybody help me please, by explaining in a bit of detail how I can fit the complete Bendix Radio Stack from the Twin Otter in to the B58 and also fit the ADF indicator card gauge as well? That said, I would rather not remove any of the gauges to insert the ADF indicator gauge, so is it possible to fit this below the Instrument Air Guage to the left of the VOR2 indicator? Many thanks and all the best everyone. Edited December 24, 20196 yr by Ace9 typo All The Best Roger
December 24, 20196 yr There are limits to what you can do in the 3d cockpit... you are basically limited to replacing existing gauges/radios.. So placing a new gauge in an open space can only be done by the original author, unfortunately. Bert
December 24, 20196 yr OK thanks Bert, So I will have to exchange a gauge, no problem. Can you point me in the right direction with the Radio Stack swap? for example, do I have to copy any folders / files across from the Twin Otter to B58. Many Thanks for your help. All The Best Roger
December 24, 20196 yr 2 hours ago, Ace9 said: OK thanks Bert, So I will have to exchange a gauge, no problem. Can you point me in the right direction with the Radio Stack swap? for example, do I have to copy any folders / files across from the Twin Otter to B58. Many Thanks for your help. I assume that you are looking at the Aerosoft Twotter.. If so, all the gauges are 3d modeled and not portable.. just check the panel.cfg file for the Twotter. That is why the examples above use older, 2d gauges which can be identified in the panel.cfg file and copied to another airplane.. Bert
December 25, 20196 yr Sorry Bert, my bad, yes the Aerosoft Twotter. I have A2A PA28 / C172, but I guess these are 3D Radios as well? Ultimately I want to get rid of the Garmin units and have a normal Bendix Radio Stack + AFD Gauge. By the way, I just noticed the FSX default B58 has a 2 in 1 VOR2-ADF gauge, but its poor quality, maybe search about to see I I can get a quality 1 of these and swap the VOR2 gauge out for it, would this work? I don't understand the procedure to accomplish this, where do I find the 2D Radio stack gauges and where do I put them in the Carenado B58? This is from the Twotter CFG - Have no Idea what I am looking for, sorry to say. [VCockpit01] file=$DHC6VIRTGAUGES.bmp Background_color=0,0,0 size_mm=512, 512 visible=1 pixel_size=512, 512 texture=$DHC6VIRTGAUGES gauge00=TW_system!TW_Sys1, 0, 0, 1, 1 gauge01=TW_system!TW_Sys2, 0, 0, 1, 1 gauge02=TW_system!TW_Sys3, 0, 0, 1, 1 gauge03=TW_system!TW_Ap, 0, 0, 1, 1 gauge04=TW_system!TW_Ann, 0, 0, 1, 1 gauge05=TW_system!TW_FDR, 0, 0, 1, 1 gauge06=TW_System!TW_State, 0, 0, 1, 1 gauge07=TW_System!Twot_vibr, 0, 0, 1, 1 gauge08=ASC!MAIN, 0,0, 10, 10, 0 gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218 gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248 gauge11=TW_Disp!DME, 8, 298, 357, 70 gauge12=TW_Disp!ADF, 8, 378, 475, 53 gauge13=TW_Disp!Transp, 8, 441, 457, 64 gauge14=TW_Disp!Clock, 377, 236, 125, 97 gauge15=TW_System!TW_APIAS, 0, 0, 1, 1 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=6143 Edited December 25, 20196 yr by Ace9 Typo All The Best Roger
Archived
This topic is now archived and is closed to further replies.