March 6, 201313 yr Commercial Member Attention FS2Crew iFly 737 users: NOTAM: 22 January 2014 Version 2+ of FS2Crew for the iFly 737 NGX is ready! Important: THIS UPDATE IS NOT BUILT INTO THE MAIN INSTALLER. THE INFORMATION IN THIS THREAD SUPERCEDES ANY ASSOCIATED INFORMATION IN THE MAIN OPS PDF MANUAL (ESPECIALLY WITH RESPECT TO 'BUTTON VERSION' JOYSTICK AND KEYBOARD ASSIGNMENTS). Download link: http://fs2crew.com/cart/Updates/FS2CrewIFlyV2.zip Change Log Version 2.4 (FSX Button Control Only): 1. Updates the FSX Button Control only. Corrects problem associated with pre-flight sounds playing during Securing flow. Change Log Version 2.3: 1. Updates the FSX version only. The FS9 version does not require updating. 2. On-line Google MAP functionality removed since it interfered with the BBJ models and caused erratic behavior. 3. Countdown timer display now visible again on the Main Panel. Change Log Version 2.2A: 1. Updates the FSX/FS9 Button Control versions only. Fixes an issue associated with below Sea Level Airports which would produce a CTD when the Descent Checklist was read back. Change Log Version 2.2: 1. FA Cabin announcements restored. Change Log Version 2.1: 1. The Green Bar in the FSX Voice version control is now working again. 2. A couple other minor bug fixes. Change Log Version 2.0: 1. FS2Crew iFly is now compatible with the iFly Features Pack (RTO during After Takeoff Flow and the Trans Alt/Level button on the FO's side). 2. FSX Voice Control Version only: You can now view yourself on FS2Crew's on-line Map: http://fs2.fs2crew.com:8080/SimpleTracker/map.do 3. Video Marshaller now works in Windows 8. 4. The product should now function in Prepar 3D. Note that the FS2Crew installer does not support P3D. You will need to manually move the FS2Crew files and folder to P3D. 5. Numerous code improvements. You should no longer experience any volume changes when you switch views. 6. BBJ Models: After Landing flow will no longer trigger the TCAS test. 7. After Landing flow: FO will turn on taxi light prior to turning off landing lights. 8. New "Soft Mute" assignment system. You now need to assign a key or joystick button to "PROP SYNC" for Soft Mute (same assignment as used in the NGX). 9. For "Button Control" users, the key assignments for the Main and Secondary Button have been updated to match those used in FS2Crew NGX: MAIN BUTTON: ALTERNATE STATIC SOURCE ON/OFF SECONDARY BUTTON: PROPELLER SYNC ON/OFF 10. You can now toggle open/close the FS2Crew Main Panel using this assignment: AUTOFEATHER ARM/OFF B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
March 29, 201313 yr Author Commercial Member bump bump bump B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
March 30, 201313 yr Hmmm. My FS9 crashes with both update 2.0 and 2.1. Installed the vers 1.2 and it works fine again.
March 31, 201313 yr Same to me, after installing Update FSX crashes to Desktop. Don't know the reason, installed as Admin with UAC and GDATA Antivirus disabled. Got the following Error Post. Name der fehlerhaften Anwendung: fsx.exe, Version: 10.0.61637.0, Zeitstempel: 0x46fadb14 Name des fehlerhaften Moduls: MSVCR90.dll, Version: 9.0.30729.6161, Zeitstempel: 0x4dace5b9 Ausnahmecode: 0xc0000005 Fehleroffset: 0x0002463e ID des fehlerhaften Prozesses: 0x11f0 Startzeit der fehlerhaften Anwendung: 0x01ce2e46d41cdd37 Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Pfad des fehlerhaften Moduls: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll Berichtskennung: f82e55e8-9a3a-11e2-af65-00261887ae94 And another funny thing happens, when I click on the artificial horizon to start FS2Crew Voice, after a short time my DVD Rom starts running and then the error message occurs.
April 1, 201313 yr Has anyone tried the update on Prepar3D. I have tried but it crashes much the same as it did on vers. 1.2
April 2, 201313 yr Author Commercial Member Same to me, after installing Update FSX crashes to Desktop. Don't know the reason, installed as Admin with UAC and GDATA Antivirus disabled. Got the following Error Post. Name der fehlerhaften Anwendung: fsx.exe, Version: 10.0.61637.0, Zeitstempel: 0x46fadb14 Name des fehlerhaften Moduls: MSVCR90.dll, Version: 9.0.30729.6161, Zeitstempel: 0x4dace5b9 Ausnahmecode: 0xc0000005 Fehleroffset: 0x0002463e ID des fehlerhaften Prozesses: 0x11f0 Startzeit der fehlerhaften Anwendung: 0x01ce2e46d41cdd37 Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Pfad des fehlerhaften Moduls: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll Berichtskennung: f82e55e8-9a3a-11e2-af65-00261887ae94 And another funny thing happens, when I click on the artificial horizon to start FS2Crew Voice, after a short time my DVD Rom starts running and then the error message occurs. Try re-installing... the MSVCR90.dll suggests maybe you need to reinstall the VS2008 end user runtimes: http://www.microsoft.com/en-us/download/details.aspx?id=5582 B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 6, 201313 yr I have a problem, I downloaded the new service pack and ran FSX and opened the main panel, But when I open the configuration panel My mouse pointer bugs out, that little around blue thinking circle Continuingly shutters And I can't stop until I exit flight simulator. This didn't happen before I downloaded the service pack. I also tried uninstalling the program and reinstalling it but it didn't work. I made a video to show you exactly what's happening. http://www.youtube.com/watch?v=4zpry0TnTNQ Aaron Brazda.
April 6, 201313 yr Author Commercial Member Thanks for the video. It helps when I can see it. However, I'm afraid I can't explain that. I suggest going back to the pre Version 2 version in the meantime. What's soft mute? Soft Mute is used when you don't want the FO to "act" on anything the speech recognition system "hears". Example: You're on VATSIM talking to on-line ATC... you might want to enable Soft Mute when talking to ATC so the FO doesn't start trying to do anything based on what he hears you saying to ATC. Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 6, 201313 yr Thanks for the video. It helps when I can see it. However, I'm afraid I can't explain that. I suggest going back to the pre Version 2 version in the meantime. ok i uninstalled fs2crew and reinstalled it without the SP but its still doing the same thing. after i re instatlled it i rebooted and i even unattached the gauge from the ifly uneing the iFly Configuration Manager, but now luck. Aaron Brazda.
April 6, 201313 yr I had the issue when its trying to load the windows too big for the screen... Try resizing the windows in the panel.cfg should look like this. [Window22] size_mm=1196, 56 pixel_size=1196, 56 window_size= 0.333, 0.874 position=3 visible=0 ident=1000 zorder=100 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_MainPanel, 0,0,1196,56 gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Audio, 20,20,5,5 gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Input, 30,30,5,5 [Window23] size_mm=866, 212 window_size= 0.333, 0.874 pixel_size=866, 212 position=4 visible=0 ident=1001 zorder=101 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_AudioSetup, 0,0,866,66 gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PreFlight, 0,66,866,62 gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Pushback, 0,128,866,84 [Window24] size_mm=681, 110 window_size= 0.333, 0.874 pixel_size=681, 110 position=6 visible=0 ident=2777 zorder=102 Sizeable=0 gauge00=FSVideoMarshaller\Gauge\FSVM!Marshaller, 0,0,681,110 [Window25] size_mm=284, 500 window_size= 0.333, 0.874 pixel_size=284, 500 position=6 visible=0 ident=1003 zorder=103 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PAPanel, 0,0,284,500 [Window26] size_mm=309, 162 window_size= 0.333, 0.874 pixel_size=309, 162 position=6 visible=0 ident=1004 zorder=104 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_FADialog, 0,0,309,162 [Window27] size_mm=330, 681 window_size= 0.333, 0.874 pixel_size=330, 681 position=6 visible=0 ident=1005 zorder=104 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_BriefPanel, 0,0,330,681 Add the bold line into each window. Make a backup of your origional panel.cfg first, in case this doesnt work. Kacper Nowotynski
April 6, 201313 yr I had the issue when its trying to load the windows too big for the screen... Try resizing the windows in the panel.cfg should look like this. [Window22] size_mm=1196, 56 pixel_size=1196, 56 window_size= 0.333, 0.874 position=3 visible=0 ident=1000 zorder=100 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_MainPanel, 0,0,1196,56 gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Audio, 20,20,5,5 gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Input, 30,30,5,5 [Window23] size_mm=866, 212 window_size= 0.333, 0.874 pixel_size=866, 212 position=4 visible=0 ident=1001 zorder=101 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_AudioSetup, 0,0,866,66 gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PreFlight, 0,66,866,62 gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Pushback, 0,128,866,84 [Window24] size_mm=681, 110 window_size= 0.333, 0.874 pixel_size=681, 110 position=6 visible=0 ident=2777 zorder=102 Sizeable=0 gauge00=FSVideoMarshaller\Gauge\FSVM!Marshaller, 0,0,681,110 [Window25] size_mm=284, 500 window_size= 0.333, 0.874 pixel_size=284, 500 position=6 visible=0 ident=1003 zorder=103 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PAPanel, 0,0,284,500 [Window26] size_mm=309, 162 window_size= 0.333, 0.874 pixel_size=309, 162 position=6 visible=0 ident=1004 zorder=104 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_FADialog, 0,0,309,162 [Window27] size_mm=330, 681 window_size= 0.333, 0.874 pixel_size=330, 681 position=6 visible=0 ident=1005 zorder=104 Sizeable=0 gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_BriefPanel, 0,0,330,681 Add the bold line into each window. Make a backup of your origional panel.cfg first, in case this doesnt work. Where do I find these settings so I can change the, it it the fsx.cfg? Aaron Brazda.
April 6, 201313 yr If you navigate to your fsx folder, then go to simobjects, aircraft, then go to IFLY aircraft you want to fly folder, you will see panel.cfg.. make a copy then open it and scroll all the way down where you see the panels for the fs2crew windows. Kacper Nowotynski
Archived
This topic is now archived and is closed to further replies.