January 14, 201412 yr Hi everyone Posted in the Majestic Forums too (would love to have a fix if there is one?): Whilst I understand P3D V2 is not fully supported I wonder if anyone else is having a similar issue?It seems to require an incredible lot of runway to accelerate to V1, V2 ! I think this may be down to using AS2012 for my weather (and the very high outside temperatures bug) ultimately I guess the performance of the aircraft would deteriorate based on this?Could anyone confirm if they have this issue and if so any workarounds they may have to allow me to operate the aircraft normally, and not have to use 3000m runways!?Many thanks in advance Russ Bailey
January 14, 201412 yr Hi Russ, interesting you should find this, because I too have experienced the same in FSX and am unsure what the issue is. HowardMSI Mag B650 Tomahawk MB, Ryzen7-7800X3D CPU@5ghz, Arctic AIO II 360 cooler, Nvidia RTX4090 GPU, 32gb DDR5@6000Mhz, SSD/2Tb+SSD/500Gb+OS, Corsair 1000W PSU, LG Ultragear 48"4K, MFG Crosswinds, TQ6 Throttle, Fulcrum One YokeMy FlightSim YouTube Channel: https://www.youtube.com/@skyhigh776
January 14, 201412 yr Commercial Member Hi, We need to know several parameters: * Aircraft weight * Airport altitude * Wind direction (were you trying to take off with a tail wind? Q400 is certified up to 20 kts tailwind component) * OAT (as displayed in the SAT window, bottom of the engine display) Can you also check that both engines were producing maximum takeoff power, and not set to something lower? Best regards, Robin.
January 14, 201412 yr It happened to me then I found out that I had forgotten to lower the brake on the throttles... Henri Arsenault
January 15, 201412 yr It happened to me then I found out that I had forgotten to lower the brake on the throttles... Gust/Control lock (which also prevents the throttle from getting into the take-off range, so you can taxi with the locks on, but can't try to take-off with the ailerons locked. Trent Hopkinson, 2015 Crewmember of www.mangrove.com.au WorldFlight sim Youtube channel www.youtube.com/user/musicalaviator
January 16, 201412 yr Author Hi and many thanks for the replies.OK looks like the performance issue is solely attributed to the SAT being 74C !!!The only fix is to manually edit the weather from the menu as far as I can tell? Russ Bailey
January 19, 201412 yr Hi and many thanks for the replies. OK looks like the performance issue is solely attributed to the SAT being 74C !!! The only fix is to manually edit the weather from the menu as far as I can tell? well, or try to figure out why the sim thinks your temparture is 74C. are you taking off in a volcano?? what weather setup are you using? cheers -andy crosby
January 21, 201412 yr Maybe some weather injection got Fahrenheit mixed up with Celsius? Trent Hopkinson, 2015 Crewmember of www.mangrove.com.au WorldFlight sim Youtube channel www.youtube.com/user/musicalaviator
January 23, 201412 yr Commercial Member The temp issue which you are experiencing is a known issue when using external weather injectors (ASN, AS2012, REX). If I remember correctly ASN and REX are both working on this fix for their weather platforms. KROSWYND a.k.a KILO_WHISKEYMajestic Software Development/Support Sys 1: AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2: i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware: Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM gripSIMULATORS: MSFS2020/XP12/P3D v5.4 & v6: YouTube Videos
January 25, 201412 yr The temp issue which you are experiencing is a known issue when using external weather injectors (ASN, AS2012, REX). If I remember correctly ASN and REX are both working on this fix for their weather platforms. q400 works great with ASN already! i didnt have any problems with as2012 either although that was with sp3 i think. cheers -andy crosby
January 25, 201412 yr Commercial Member q400 works great with ASN already! i didnt have any problems with as2012 either although that was with sp3 i think. cheers -andy crosby with relation to P2D v2 KROSWYND a.k.a KILO_WHISKEYMajestic Software Development/Support Sys 1: AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2: i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware: Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM gripSIMULATORS: MSFS2020/XP12/P3D v5.4 & v6: YouTube Videos
Create an account or sign in to comment