Jump to content

Sign in to follow this  
guenseli

A2A Piper PA 28 Cherokee 180 (module Version 1.2)

Recommended Posts

Here you can download the LINDA aircraft module for the A2A Piper PA 28 Cherokee 180

Installation notes:

  • Download and unzip it and place the two folders into: */Microsoft Games/Microsoft Flight Simulator X/Modules
  • Say "yes" if he'd like to overwrite anything
  • Your current Combo settings wouldn't be overwritten, but you find in Modules/linda-cfg/aircrafts/A2A_Piper_PA28_180_Cherokee files named *.default. name them to *.lua to use them.

Download: A2A Piper PA28 180 v1.2


v 1.1 --> 1.2
Radios on/off added
Wheel Chocks
Fuel Pump

v 1.0 --> v1.1

added baro_mode to function InitVars: -- 0 = inHG, 1 = hPa, 2 = mmHG ... default is 1, hPa

added EGT Ref

fixed NAV/GPS switch

 

Edited by ScotFlieger
Link fixed

Guenter Steiner
--------------------------------------------------------------------------------------
LINDA Lua Integrated Non-complex Device Assigning

Betatester for: A2A, Hifi, Simstarter, AivlaSoft 
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

Blimey that was quick! It was only released this afternoon!

 

Just want to say thanks for this fantastic programme - Linda has revolutionised my simming. I've only been using it about a week (since getting an MCP combo thing) but I've been able to map all sorts of controls to rotaries and switches and this is only the start.

 

Right, off now to try out the controls on the Cherokee.

 

Thanks again,

Stu


Stuart Furley

Share this post


Link to post
Share on other sites

 

 

It was only released this afternoon!

 

 

Yes, I'm sorry, I was at work and wasn't able to release it right with the Cherokee  :P  ^_^

 

 

Thanks for your nice words, much appreaciated


Guenter Steiner
--------------------------------------------------------------------------------------
LINDA Lua Integrated Non-complex Device Assigning

Betatester for: A2A, Hifi, Simstarter, AivlaSoft 
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

He's on the A2A beta team that's why it was so quick. Thanks Guenter. Just wish I could afford to buy the Cherokee, it will have to wait a few months yet.


Cheers, Andy.

Share this post


Link to post
Share on other sites

Thanks a LOT guys. Great stuff!


Best regards, Fritz ESSONO

Share this post


Link to post
Share on other sites

Oh great Günther

just received my Cherokee and hopefully took a lock in here :-)

 

Thx a lot


With kind regards

Roland Pohl
Vice chairman FSC e.V.

Share this post


Link to post
Share on other sites

He's on the A2A beta team that's why it was so quick. Thanks Guenter. Just wish I could afford to buy the Cherokee, it will have to wait a few months yet.

 

Watch out Andy you implied saving there. I thought that was a lost thing within the fs community. Thankyou for restoring some faith hehe :)


Lewis - A2A Simulations

Share this post


Link to post
Share on other sites

So I broke and went and bought it earlier than I should have done, lol.

 

Point 1, how do I change the temperature units Guenter, I prefer to use Celsius. I can see the math in the code but I have no clue where to set the flag for F or C.

 

Also please can you add an option to display Baro in both formats and allow us to swap between them by pressing the Baro knob in like we can on the Cessna please. I don't particularly like the baro knob being dual function either I prefer the cabin temps and vents the way they were in the Cessna profile. The mins knob worked as a EGT peak needle adjust and rudder trim in the C172 too, it would be awesome if you could emulate that for the Cherokee too.

 

Otherwise I am loving the integration with the MCP, thank you very much.


Cheers, Andy.

Share this post


Link to post
Share on other sites

Hi Günther,

agree with Andy.

Found a little bug I think.

Nav/ GPS Switches are twisted. If you assign A2A GPSNav nav it switches to GPS and viceversa.


With kind regards

Roland Pohl
Vice chairman FSC e.V.

Share this post


Link to post
Share on other sites

I noticed transponder cycle doesn't work either, it acts like INC but then goes no further.

 

EDIT: Also I dont know what I did to change them but the temps are in C now too :)


Cheers, Andy.

Share this post


Link to post
Share on other sites

Yes, I'm sorry, I was at work and wasn't able to release it right with the Cherokee  :P  ^_^

 

 

Thanks for your nice words, much appreaciated

Do these setting all work with P3D. I would think they do but just checking

 

Thanks


Sam

Prepar3D V5.0/8086K@5.0/EVGA 1080TI SC Black/850W PSU/Windows 10/40" 4K Samsung Monitor@3840x2160/ASP4/ASCA/ORBX/ChasePlane/General Aviation/Vertx DA-62/

Share this post


Link to post
Share on other sites

Hello Guys,

 

thanks for the feedback, will fix and implement (if able)

 

 

The temperature units are tied to the Cherokee settings metric or imperial.

I found that a cool feature. If there's need I can think about a setting where someone is able to untie it.


Guenter Steiner
--------------------------------------------------------------------------------------
LINDA Lua Integrated Non-complex Device Assigning

Betatester for: A2A, Hifi, Simstarter, AivlaSoft 
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

Ah that explains it regarding the temps thanks, I had played with the units switch in the A2A interface, thanks again and I look forward to the changes. One other thing can you add a rudder trim adjustment and readout like there was in the c172 on the mins knob mode 2, cheers. I know it's probably not realistic for this bird, but it just a convenience thing for the rather irritating fuel tank situation on these aircraft, why they couldn't have a both position for the tanks I'm not sure.


Cheers, Andy.

Share this post


Link to post
Share on other sites

Hi Guenter,

 

think about to check if "AP Disconnect"- command is correct. Getting FSX CTD when assigning this function to a yoke button.

 

Gruss Nico


I like accusim

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    21%
    $5,490.00 of $25,000.00 Donate Now
×
×
  • Create New...