June 24, 201411 yr Hi Jim, thanks for your reply. To be 100% sure I've already gone down the uninstall everything route, cleaning everything up, disable UAC and AV. So I already came to the conclusion that the fault must be in P3D itself. I've made a detailed post at the P3D forum and hopefully they'll be able to pick it up, reproduce it and implement a fix. I urge everyone who has the same problem to report it there as well (after doing the disabling stuff to diagnose it). It's great to have an opportunity to directly inform the developers so let's use it! best regards.
June 25, 201411 yr I had my First one tonight (Ever) I Didn't shut down my Avilasoft EFB before i Exited. Might want to check into that. Marty Baclawski
June 25, 201411 yr Author Sounds like re-enabling tessellation if you turned it off my be something to try. Yes also saw this tip on the P3D forums. Will try it tonight. Chillblast Core i5 14600KF Liquid Cooled RTX 4070 SUPER 32GB RAM. Internet: 1 Gig Fibre. HoneyComb Throttle & Flight System. UK PPL since 2006 current on PA-28, C-152, C172, Decathlon, C-42 based at EGHP.
June 26, 201411 yr I only get this if I crash. Not the sim but the aircraft I'm flying. I guess it's telling me if you can't get it down in one piece, you shouldn't be using this software. :lol:
July 8, 201411 yr Author Can confirm that ticking "tesselation" in settings does appear (so far) to prevent the R6025 crash. Unfortunately on my system it causes minor stutters regardless of most settings. With tesselation ticked "off" I have a fluid 60fps sim experience but eventually the R6025 error returns :( Am hoping V2.3 will fix this. If not am requesting a refund and going back to FSX. Chillblast Core i5 14600KF Liquid Cooled RTX 4070 SUPER 32GB RAM. Internet: 1 Gig Fibre. HoneyComb Throttle & Flight System. UK PPL since 2006 current on PA-28, C-152, C172, Decathlon, C-42 based at EGHP.
July 8, 201411 yr Same problem here, with only these addons installed: - Piper Cheyenne X (not working) - Real Air Turbine Duke v1.2 - REX 4 - Textures - Demo install of ASN NEXT BETA for Prepar3d (not activated yet) I'm currently uninstalling everything including my AV scanner to do a full clean install. Hopefully, it will be gone. Debugging will be very time consuming, the error can take up to two hours to occur. <_< Interesting you mention ASN. I had this error due to RAAS, removing the reference in the dll.xml fixed this. However I have a demo of ASN and have since noticed this issue again. I am wondering if that is what is causing it again for me. Tom Tom Why not read some useful tips and tricks - http://forum.avsim.n...22#entry1965722
July 8, 201411 yr Hi Tom, I also got the error a couple of times with a perfectly clean re-installed Prepar3d so for me, the problem seems to be in P3D. But the error can probably be triggered by addons as well. At the moment I have all my addons installed again (no ASN), and I've not seen it in the last three flights. But maybe that's because they were a bit shorter. If only the error could be reliably reproduced... Peekstra.
July 8, 201411 yr Author Interesting you mention ASN. I had this error due to RAAS, removing the reference in the dll.xml fixed this. However I have a demo of ASN and have since noticed this issue again. I am wondering if that is what is causing it again for me. Tom That's very interesting Tom. I have a registered copy of ASN installed. I think I'll uninstall it tonight and see if the R6025 crash occurs again. Chillblast Core i5 14600KF Liquid Cooled RTX 4070 SUPER 32GB RAM. Internet: 1 Gig Fibre. HoneyComb Throttle & Flight System. UK PPL since 2006 current on PA-28, C-152, C172, Decathlon, C-42 based at EGHP.
July 8, 201411 yr Commercial Member That's very interesting Tom. I have a registered copy of ASN installed. I think I'll uninstall it tonight and see if the R6025 crash occurs again. Definitely not an inherent P3D or FSX issue. It could be caused by any add-on. You may want to read this thread. http://forum.avsim.net/topic/444989-windows-7-pro-64-default-beep-on-shutdown/ Gerald R https://www.multicrewxp.com
July 9, 201411 yr Author Definitely not an inherent P3D or FSX issue. It could be caused by any add-on. You may want to read this thread. http://forum.avsim.net/topic/444989-windows-7-pro-64-default-beep-on-shutdown/ Thanks FS++ - the final post on that thread could hold the answer! I've already uninstalled ASN to check whether it was the culprit. I'll try and reinstall it once I've finished testing without the X GAUGE stuff. Cheers Adam Chillblast Core i5 14600KF Liquid Cooled RTX 4070 SUPER 32GB RAM. Internet: 1 Gig Fibre. HoneyComb Throttle & Flight System. UK PPL since 2006 current on PA-28, C-152, C172, Decathlon, C-42 based at EGHP.
July 9, 201411 yr Simply checking Tessellation and then bringing the slider full left (if you don't want any frame rate impact) stopped the error for me. I run ASN all the time without problems now. So for me, I can only point to it being a P3D issue.
July 9, 201411 yr Author Simply checking Tessellation and then bringing the slider full left (if you don't want any frame rate impact) stopped the error for me. I run ASN all the time without problems now. So for me, I can only point to it being a P3D issue. Tried that but performance went from smooth 60fps to stuttering 30fps with tesselation ticked and slider full left. Do you have X GAUGE installed in your ASN installation? Chillblast Core i5 14600KF Liquid Cooled RTX 4070 SUPER 32GB RAM. Internet: 1 Gig Fibre. HoneyComb Throttle & Flight System. UK PPL since 2006 current on PA-28, C-152, C172, Decathlon, C-42 based at EGHP.
Create an account or sign in to comment