P3D V4 and the Boeing 767

[Mace 1,896]

6 hours ago, KrisJ said:

Thanks! Will try some of your sertings.

i managed to add ISG FMS to VC. Fits perfectly. I  am calculating v speeds using real world charts. I use Milviz/ Rex radar as pup up window.

Hey can you tell me / show me how you were able to add the ISG FMS to the VC? 

 

6 hours ago, KrisJ said:

Did you build some DC10 like ISG cfg file to customize FMS? I can see you have this DC1010F suffix as 5th parmeter in gauges.

Yes I did -- I have a profile for the DC10-10F and the DC10-30.  Here is the text for the DC1010F.cfg file -- place it in your ISG/Aircraft subfolder:

 

; McDonnell-Douglas DC-10-10F
ApprFlapsMin=15
ApprFlapsMid=35
ApprFlapsMax=50
BestHoldIas=180
ClbAltRest=10000
ClbSpdRest=250
ClimbIas=290
ClimbRate=1500
ClimbIasMax=290
ClimbIasMin=180
CostIndex=200
CruiseIasMax=320
CruiseIasMin=290
DescentIasMax=290
DescentIasMin=180
DescentRate=2000
EngThrust=40000
FPA=3.5
LdgFlaps=50
MaxCruise=33000
MaxVnavDescRate=3500
MaxVnavClimbRate=1500
MinVnavIas=135
MinVNavRadioAlt=500
ModelID=DC-10-10F
ParkingFile=isg_Parking.txt
MFDTextAntiAlias=0
TOFlaps=15
TOFlapsRange=5,15,22,35,50
TransAlt=18000

[KrisJ 43]

6 hours ago, Mace said:

Hey can you tell me / show me how you were able to add the ISG FMS to the VC? 

Sure, will send you required line as soon as i am back from work.

6 hours ago, Mace said:

Yes I did -- I have a profile for the DC10-10F and the DC10-30. 

Can you share DC10-30 too? I am flying dash 30 only as i have no performance charts for -10.

[KrisJ 43]

[Vcockpit12]
Background_color = 0,0,0
size_mm = 1024, 1024
visible = 1
pixel_size = 1024
texture = $CDU
gauge00 = CLS_DC10_FSX!ICON_FMC,  100,60,478,400
gauge01 = isg1!SMITHS_FMS,  26,12,624,1024,DC10

[Mace 1,896]

8 hours ago, KrisJ said:

Can you share DC10-30 too? I am flying dash 30 only as i have no performance charts for -10.

Yes - But now *I* am at work and won't be able to do it until this evening.

Keep in mind my profiles are based on perf info I could find, plus trial-and-error, so they are not gospel by any means. 

For instance the -10 climb rate is pretty conservative, as I found this works best to avoid any problems with low airspeed during climbs in the sim on the -10 variant.  Of course, then I started looking into whether or not the -10 .air file was realistic -- but that's a whole 'nuther can of worms -- there is info at the Just Flight forums/ "F-Lite" subforum on the .air files.

As for the -30, I find its .air file to get a little closer to what the charts show for rate of climb, etc.  although I might be using an older .air file for it (I can't remember offhand).  The -30 profile as I remember it has a higher rate of climb limit in my ISG profile.

[Mace 1,896]

40 minutes ago, KrisJ said:

[Vcockpit12]
Background_color = 0,0,0
size_mm = 1024, 1024
visible = 1
pixel_size = 1024
texture = $CDU
gauge00 = CLS_DC10_FSX!ICON_FMC,  100,60,478,400
gauge01 = isg1!SMITHS_FMS,  26,12,624,1024,DC10

Thanks much

[Mace 1,896]

18 hours ago, KrisJ said:

Sure, will send you required line as soon as i am back from work.

Can you share DC10-30 too? I am flying dash 30 only as i have no performance charts for -10.

Here's my ISG profile for the DC-10-30F

; McDonnell-Douglas DC-10-30F
ApprFlapsMin=15
ApprFlapsMid=35
ApprFlapsMax=50
BestHoldIas=180
ClbAltRest=10000
ClbSpdRest=250
ClimbIas=300
ClimbRate=2000
ClimbIasMax=300
ClimbIasMin=200
CostIndex=200
CruiseIasMax=340
CruiseIasMin=290
DescentIasMax=290
DescentIasMin=180
DescentRate=2000
EngThrust=53000
FPA=3.5
LdgFlaps=50
MaxCruise=33000
MaxVnavDescRate=3500
MaxVnavClimbRate=2000
MinVnavIas=135
MinVNavRadioAlt=500
ModelID=DC-10-30F
ParkingFile=isg_Parking.txt
MFDTextAntiAlias=0
TOFlaps=15
TOFlapsRange=5,15,22,35,50
TransAlt=18000

[KrisJ 43]

Thanks!

[asustech 5]

HD Airplanes have released a 767 .... 😁

[willy647 193]

5 hours ago, asustech said:

HD Airplanes have released a 767 ...

For $15.99 I would not expect too much. I understand there is no FMC either.

[hkrammer 0]

Have found a video on Youtube, where ACommonFerrariFan has merged the LevelD with the cockpit of the CS 757 III: https://www.youtube.com/watch?v=DUOtFJ-E9tI

 

Have testet this and it Works! Only the spoilers do not move on outside view and you will have no landing lights. Also during takeoff you get a spoilers warning.

The rest worked for me. First time after loading you are outside of the cockpit and so not able to see it. You must move back your viewpoint or overwrite the settings in the aircraft.cfg: (dont change or delete the rest!)

[Views]
eyepoint=68.70, -1.65, 5.8
zoom=0.3

[CameraDefinition.001]
Title = Right Seat
...

InitialZoom = 0.3

InitialXyz=0.99, -0.03, -0.02
InitialPbh=-1.24, 0.00, 0.00

[CameraDefinition.002]
Title = Overhead Panel
InitialZoom = 0.3

InitialXyz= 0.5, -0.34, 0.18
InitialPbh= -67.00, 0.00, 0
 

[CameraDefinition.003]
Title = Engine Control

InitialZoom = 0.6

InitialXyz= 0.5, 0, 0
InitialPbh= 48.8, 0, 0

[CameraDefinition.004]
Title = Radio Panel

InitialZoom = 0.5

InitialXyz= 0.5, 0.0, 0
InitialPbh= 76, 0, 0

the model.cfg should read:

[models]
normal=767300
interior=..\..\..\..\Captain_Sim\757-III\models\y572_101_interior

the texture.cfg for any texture in the LVLD_B763_Winglet - version:

[fltsim]

fallback.1=..\texture
fallback.2=..\..\LVLD_B763\texture
fallback.3=..\..\LVLD_B763\texture.GE
fallback.4=..\..\LVLD_B763\texture.PW
fallback.5=..\..\LVLD_B763\texture.RR
fallback.6=..\..\..\..\Scenery\Global\texture
fallback.7=..\..\..\..\..\..\Scenery\Global\texture
fallback.8=..\..\CS_B757-200-III_PW2037\texture
fallback.9=..\..\CS_B757-200-III_PW2037\texture\night
fallback.10=..\..\CS_B757-200-III_PW2037\texture\spec
fallback.11=..\..\CS_B757-200-III_PW2037\texture\bump

the texture.cfg for any texture in the LVLD_B763 version:

[fltsim]

fallback.1=..\texture
fallback.2=..\texture.GE
fallback.3=..\..\..\..\Scenery\Global\texture
fallback.4=..\..\..\..\..\..\Scenery\Global\texture
fallback.5=..\..\CS_B757-200-III_PW2037\texture
fallback.6=..\..\CS_B757-200-III_PW2037\texture\night
fallback.7=..\..\CS_B757-200-III_PW2037\texture\spec
fallback.8=..\..\CS_B757-200-III_PW2037\texture\bump

I have first installed the LD763-FSX-With-SP2a.exe to P3D4.

Then the update for P3D3/Win10: Level-D767-1.50-Update.exe to P3D4

Alternative you can install the latest installer from LevelD.

Then the winglet update: Level-D-767-Winglets-1.01.exe

Afterwards the above changes.

that's all, have fun . . .

Edited December 28, 2019 by hkrammer

[cowpatz 243]

On 10/15/2018 at 6:28 PM, fluffyflops said:

 

To this day there isn't an addon that can do a managed descent like the lds 767. Even the pmdg birds and the fsl struggle at times to do one properly if its on a star with a shed loads of constraints. The lds however was amazing, if flew like a block of flats, but it was amazing 

Not so sure about that statement. From my recollection the LVL D 767 didn’t handle at or above/below altitude constraints at all well. It just treated them as “AT” altitudes. This could lead to some very low descent paths.

I find the iFLY range of aircraft to be very good at LNAV/VNAV. Not always perfect but still very good. 

I don’t think we will see anything again from LVL D.

[charco92 0]

Hi everyone,

Just catching up on that topic. recently bought the DC-10 for P3Dv4 and looking for a panel.cfg files to get the ISG FMC & EHSI in the VC. Does anyone have that ? 

EDIT: Just realised you already put the FMC .cfg details, that's fantastic. Tried it and great job!

Thanks so much,

Thomas.

Edited April 5, 2020 by charco92
Incorrect text