June 24, 20205 yr 8 minutes ago, Kaiii3 said: just delete the file and start P3D and check if the error still come up. If it does not add one of your extra entries od the old file to the new and tra again. BTW i do not use any AM settings so they can not cause the problem I did following: Deleted shaders deleted p3d.cfg deleted shadershlsl repaired P3D started p3d did my settings in the menues started stock flight (no airplane or airport manually choosen) directly after 99% load and "building" the scenario screen DXGI....Error Message EVTVWR Fault bucket LKD_0x141_Tdr:6_IMAGE_nvlddmkm.sys_Unknown, type 0 Event Name: LiveKernelEvent Response: Not available Cab Id: cbbacb46-12fb-404c-a378-ee4edde62f2c Problem signature: P1: 141 P2: ffffbf85dcac7450 P3: fffff80455672610 P4: 0 P5: 343c P6: 10_0_19041 P7: 0_0 P8: 768_1 P9: P10: Attached files: \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20200624-1406.dmp \\?\C:\WINDOWS\TEMP\WER-1404281-0.sysdata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER76FE.tmp.WERInternalMetadata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER76FF.tmp.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7712.tmp.csv \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7723.tmp.txt \\?\C:\Windows\Temp\WERAF07.tmp.WERDataCollectionStatus.txt These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_c7171d32195015c5e7912712202c5ab454ee_00000000_cab_ac768943-a89d-4319-a9b4-e35b3547ce37 Analysis symbol: Rechecking for solution: 0 Report Id: ac768943-a89d-4319-a9b4-e35b3547ce37 Report Status: 2147483648 Hashed bucket: Cab Guid: 0 Regards, Marcus P.
June 24, 20205 yr 14 minutes ago, Kaiii3 said: just delete the file and start P3D and check if the error still come up. If it does not add one of your extra entries od the old file to the new and tra again. BTW i do not use any AM settings so they can not cause the problem I did following: Deleted shaders deleted p3d.cfg deleted shadershlsl repaired P3D started p3d did my settings in the menues started stock flight (no airplane or airport manually choosen) directly after 99% load and "building" the scenario screen DXGI....Error Message EVTVWR Fault bucket LKD_0x141_Tdr:6_IMAGE_nvlddmkm.sys_Unknown, type 0 Event Name: LiveKernelEvent Response: Not available Cab Id: cbbacb46-12fb-404c-a378-ee4edde62f2c Problem signature: P1: 141 P2: ffffbf85dcac7450 P3: fffff80455672610 P4: 0 P5: 343c P6: 10_0_19041 P7: 0_0 P8: 768_1 P9: P10: Attached files: \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20200624-1406.dmp \\?\C:\WINDOWS\TEMP\WER-1404281-0.sysdata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER76FE.tmp.WERInternalMetadata.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER76FF.tmp.xml \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7712.tmp.csv \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER7723.tmp.txt \\?\C:\Windows\Temp\WERAF07.tmp.WERDataCollectionStatus.txt These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_c7171d32195015c5e7912712202c5ab454ee_00000000_cab_ac768943-a89d-4319-a9b4-e35b3547ce37 Analysis symbol: Rechecking for solution: 0 Report Id: ac768943-a89d-4319-a9b4-e35b3547ce37 Report Status: 2147483648 Hashed bucket: Cab Guid: 0 Edited June 24, 20205 yr by mpo910 Regards, Marcus P.
June 24, 20205 yr Author Guys. This thread is getting a little cluttered. My intent creating this topic was for people like me who are getting the immediate CTD upon launching the scenario who were also fine running hotfix 1. Problem starting just upon getting hotfix 2. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
June 24, 20205 yr I get the message even with complete stock p3d.cfg and not editing any menu entries at all. Just deleted the p3d.cfg, started p3d and started the fully default scenario, DXGI Hung.... This is getting really interesting. I am not able to fly anymore, even if y was yesterday and this morning. Starnge Regards, Marcus P.
June 24, 20205 yr Author 1 minute ago, mpo910 said: I get the message even with complete stock p3d.cfg and not editing any menu entries at all. Just deleted the p3d.cfg, started p3d and started the fully default scenario, DXGI Hung.... This is getting really interesting. I am not able to fly anymore, even if y was yesterday and this morning. Starnge Same. Only way I can fly is to revert to hotfix 1 client 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
June 24, 20205 yr Commercial Member 5 minutes ago, micstatic said: Same. Only way I can fly is to revert to hotfix 1 client right, now do this: 1) Disable True sky. close P3D. 2) Open P3D and launch.. let me know if it crashed this time. S. Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
June 24, 20205 yr 22 minutes ago, simbol said: right, now do this: 1) Disable True sky. close P3D. 2) Open P3D and launch.. let me know if it crashed this time. S. I got in. Stock P3D.CFG, Now menu settings, But FPS are at 1.2. Very strange uninstalled Nvidia with DDU Reinstalled latest drivers Reinstalled P3D Client Fired it up No settings done Just fired up the default flight Got 1.2 FPS CPU at 6% GPU at 35% with 3.9GB VRAM Windows Defender off Started P3D as ADMIN Windows did not do any updates after I installed HF2 Only windows defender updated probably strange is the Reborn lights on the stock plane. They look odd to me. That was not before I got these FPS and DXGI Hung errors. I will check without this addon Simbol Edited June 24, 20205 yr by mpo910 Regards, Marcus P.
June 24, 20205 yr Commercial Member 1 minute ago, mpo910 said: Got 1.2 FPS You are not using Nvidia profiles right? Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
June 24, 20205 yr Author simbol: My immediate CTD is whether EA is on on or ff. Even after disabling EA, closing P3D, restarting P3d, it still crashes. @Kaiii3you found the issue? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
June 24, 20205 yr Just now, micstatic said: simbol: My immediate CTD is whether EA is on on or ff. Even after disabling EA, closing P3D, restarting P3d, it still crashes. @Kaiii3you found the issue? I am working on it - but i think I am very close thanks to @simbol for pointing out the possible causes
June 24, 20205 yr 3 minutes ago, simbol said: You are not using Nvidia profiles right? Just NControlpanel Regards, Marcus P.
June 24, 20205 yr Author 1 minute ago, mpo910 said: Just NControlpanel same. And I completely restored the NCP to default 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
June 24, 20205 yr Commercial Member 3 minutes ago, micstatic said: simbol: My immediate CTD is whether EA is on on or ff. Even after disabling EA, closing P3D, restarting P3d, it still crashes. @Kaiii3you found the issue? What are you current effects details settings? S. Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
June 24, 20205 yr 6 minutes ago, simbol said: You are not using Nvidia profiles right? Shall I try with windows stock Nvidia drivers and leaving my manually instad Nvidia driver out? Regards, Marcus P.
Archived
This topic is now archived and is closed to further replies.