Hi Gerald, I have been waiting for PF3 for MSFS but the last mention of this was by Dave on his forum on the 10th of Sept prior to the fix to Simconnect.  There was also a mention of Makerwys being needed for MSFS and I see Peter and John of FSUIPC fame have created a beta version.  Are you sure that PF3ATC is currently compatible with MSFS?  I hope you are right and I just can't find it!

Regards.

On 10/25/2020 at 9:48 PM, Simjockey said:

Hi Gerald, I have been waiting for PF3 for MSFS but the last mention of this was by Dave on his forum on the 10th of Sept prior to the fix to Simconnect.  There was also a mention of Makerwys being needed for MSFS and I see Peter and John of FSUIPC fame have created a beta version.  Are you sure that PF3ATC is currently compatible with MSFS?  I hope you are right and I just can't find it!

Regards.

Depends what you call "sure and 100%"

There is no such thing in the flight sim world.

Obviously a dev has to be careful when putting out such statemnet when there is no Demo. Request for refunds would follow inevitably because someone discovered a specific frequency isn't handled correctly.

The honest guys will put out a Demo so you can see for yourself what you're willing to put up with. After all built-in ATC has its flaws too.

PF3, Radar Contact, Pilot2Atc all rely on FSUIPC.

They all work if they don't seek to update databases to be in synch with the few latest introduced frequencies (example:118.030).

 

 

Edited October 31, 20205 yr by FS++
typo

Hi @FS++

with the latest patch for MSFS 1.10.7.0 the FO is not able to handel ATC anymore.  Commands like "Request IFR Clearance", or "Aknowledge last transmission". Basically any interaction with ATC

Maybe someone can confirm it, i want to rule out configuration issue. But it worked before for me. I made sure that Language is still set to English US in MSFS. There is also now an issue with setting the FL on the A320x (not sure if its mod related). The FO will tune flight level to invalid values.

 

Besides that i have another question, is there documentation on how to use the Ground Services of MSFS (if its even possible). Last but notleast, is there a source where to find more Vox Commands? Im looking for the CJ4.

kind regards

 

Edited October 30, 20205 yr by pointblack

15 hours ago, pointblack said:

Hi @FS++

with the latest patch for MSFS 1.10.7.0 the FO is not able to handel ATC anymore.  Commands like "Request IFR Clearance", or "Aknowledge last transmission". Basically any interaction with ATC

Maybe someone can confirm it, i want to rule out configuration issue. But it worked before for me. I made sure that Language is still set to English US in MSFS.

 

Besides that i have another question, is there documentation on how to use the Ground Services of MSFS (if its even possible). Last but notleast, is there a source where to find more Vox Commands? Im looking for the CJ4.

kind regards

 

Unless you're already on MCE V2.8.8.2, grab this patch and manually replace 3 files in MCE installation folder. That'll get ATC sorted.

Ground services not interfaced yet because the built-in system cannot be disabled and you would have duplicates for everything, never mind not all doors working with many aircraft.

I mean MCE ramp agent requests catering, MCE dispatcher acknowledges, built-in rampy makes same  own request and the other TTS voice replies.

Would be very easy to enable if users think it's going to be very useful.

Edit: Regarding documentation.

Tens of thousands of speech comands are available at any given time, so you don't have to memorize exact wording.

Use the Windows menu Start->Multi Crew Experience.

Commands that apply to all aircraft would be under "shared comands" (grouped by system)

Most recent MCE version ships with pre-made flows for CJ4. maybe should just un-install, re-download and install latest.

 

Edited October 31, 20205 yr by FS++
typo

1 hour ago, FS++ said:

Unless you're already on MCE V2.8.8.2, grab this patch and manually replace 3 files in MCE installation folder. That'll get ATC sorted.

Ground services not interfaced yet because the built-in system cannot be disabled and you would have duplicates for everything, never mind not all doors working with many aircraft.

I mean MCE ramp agent requests catering, MCE dispatcher acknowledges, built-in rampy akes sae  own request and the other TTS voice replies.

Would be very easy to enable if users think it's going to be very useful.

Edit: Regarding docuentation.

Tens of thousands of speech comands are available at any given tie, so you don't have to memorize exact wording.

Use the Windows menu Start->Multi Crew Experience.

Commands that apply to all aircraft would be under "shared comands" (grouped by system)

Most recent MCE version ships with pre-made flows for CJ4. maybe should just un-install, re-download and install latest.

 

Great, thanks for the quick reply and the tip regarding the patch 💗

A new patch  has been posted.

Please replace all files as per folder structure.

 

Bump 🙂

To catch-up with latest MSFS 2020 ATC, all users are advised to upgrade to latest MCE version

Unless you're already on MCE V2.8.8.5 or higher, in which case download this patch, then manually replace a few files in MCE installation folder.

 

 

Edited November 30, 20205 yr by FS++

Thanks Gerald.  Heads up the "m" is missing from your website address in the patch link.

12 hours ago, regis9 said:

Thanks Gerald.  Heads up the "m" is missing from your website address in the patch link.

Good catch. Thanks

MCE and MSFS2020 1.11.6 doesn't work for me

After launching MCE just before the gate departure it is waiting for aircraft data. Normally is should be done in a few seconds.

But since 11.1.5 or the minor update 11.1.6 the app starts and is looping. Do you have the same problem or any work around in mind?

Happy landings,

LH067U

Edited December 4, 20205 yr by LH067U

5 hours ago, LH067U said:

MCE and MSFS2020 1.11.6 doesn't work for me

After launching MCE just before the gate departure it is waiting for aircraft data. Normally is should be done in a few seconds.

But since 11.1.5 or the minor update 11.1.6 the app starts and is looping. Do you have the same problem or any work around in mind?

Happy landings,

LH067U

If using any mods, temporarily move them out of community folder and try again.

Cannot immediately see the issue here Will wait a bit to see if others are affected. .

 

13 hours ago, FS++ said:

If using any mods, temporarily move them out of community folder and try again.

Cannot immediately see the issue here Will wait a bit to see if others are affected. .

 

Moved the A32NX mods out of the community folder and it worked. Moving A32NX back it is going into the loop again and doesn't receive any aircraft data.☹️

 

2 hours ago, LH067U said:

Moved the A32NX mods out of the community folder and it worked. Moving A32NX back it is going into the loop again and doesn't receive any aircraft data.☹️

 

Usually have to wait until the mod is compatible with latest ASOBO release.

It breaks almost on every sim update.

I believe they have a new Beta. Do not use old one.

 

20 hours ago, FS++ said:

Usually have to wait until the mod is compatible with latest ASOBO release.

It breaks almost on every sim update.

I believe they have a new Beta. Do not use old one.

 

A32NX has fixed the ASOBO bug which is going to be rolled out by ASOBO within the next update. I update the A32X mod every day to be completly up to date.

But when MCE is able to get data from the ASOBO vanilla bug bus 1.11.6 and A32X mod have fixed the bug...why does MCE doesn't get any data? That's curious, isn't it? 😉

LH067U

Edited December 6, 20205 yr by LH067U