Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Zero wind turbulence.............again !

Featured Replies

For me it's tied to the Flight model.

Legacy - Terrible no matter what settings.

Modern - almost rock steady.

Tested with the C172 and the TBM, several A/D's.

Sorry, I don't fully understand this, and it seems the opposite to most peoples experience. 

Could you clarify or give a bit more detail on how and what you were testing, and how you had the weather set up?

 

 

Rob (but call me Bob or Rob, I don't mind).

I like to trick airline passengers into thinking I have my own swimming pool in my back yard by painting a large blue rectangle on my patio.

Intel 14900K in a Z790 motherboard with water cooling, RTX 4080, 32 GB 6000 CL30 DDR5 RAM, W11 and MSFS on Samsung 980 Pro NVME SSD's.  Core Isolation Off, Game Mode Off.

2 hours ago, ambeat said:

For me it's tied to the Flight model.

Legacy - Terrible no matter what settings.

Modern - almost rock steady.

Tested with the C172 and the TBM, several A/D's.

I can confirm that. With the new flight model activated it is much much better.

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

  • Author

The flight was performed with the following conditions:

TBM 930

Clear skies

No wind

Hand flying at 100-500 ft AGL

Started with Modern flight model - almost rock steady - then i went into options without closing the session and changed to Legecy - apply and save.

Back to the TBM and it immediately started to rock back and forth up to 25 degrees bank.

 

12 minutes ago, ambeat said:

The flight was performed with the following conditions:

TBM 930

Clear skies

No wind

Hand flying at 100-500 ft AGL

Started with Modern flight model - almost rock steady - then i went into options without closing the session and changed to Legecy - apply and save.

Back to the TBM and it immediately started to rock back and forth up to 25 degrees bank.

 

The patient says, "Doctor, it hurts when I do this." "Then don't do that!" ✈️

We are all connected..... To each other, biologically...... To the Earth, chemically...... To the rest of the Universe atomically.
 
Devons rig
Intel Core i5 13600K @ 5.1GHz / G.SKILL Trident Z5 RGB Series Ram 64GB / GIGABYTE GeForce RTX 4070 Ti GAMING OC 12G Graphics Card / Sound Blaster Z / Meta Quest 2 VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 1x Samsung SSD 850 EVO 500GB / 2x Samsung SSD 860 EVO 1TB /  1x Samsung - 970 EVO Plus 2TB NVMe /  1x Samsung 980 NVMe 1TB / 2 other regular hd's with up to 10 terabyte capacity / Windows 11 Pro 64-bit / Gigabyte Z790 Aorus Elite AX Motherboard LGA 1700 DDR5
20 minutes ago, HiFlyer said:

The patient says, "Doctor, it hurts when I do this." "Then don't do that!" ✈️

"That will be $800." 😄 

Hook

Larry Hookins

 

Oh! I have slipped the surly bonds of Earth
And danced the skies on laughter-silvered wings;

Make sure that you actually delete the default wind layer, you can see this in the wx dialog screen.  It is as the very bottom, you have highlight it and delete for every flight as it is generated automatically regardless of what type of wx you have selected.  I wish there was a way to not have to do this on every flight, maybe some day.  This will make a big difference from the ground level (take off) to about 1200' AGL.

CPU: Core i5-6600K 4 core (3.5GHz) - overclock to 4.3 | RAM: (1066 MHz) 16GB
MOBO: ASUS Z170 Pro |  GeForce GTX 1070 8GB | MONITOR: 2560 X 1440 2K

  • Author

Pick whatever wx, delete all wind layers and save as a new wx theme.

What turbulence you are supposed to find in a clear skies/no wind preset? Just press that "live" button, fly mountains and you'll find all the turbulences you want.

Missing the PMDG DC6 in MSFS 2024 (she's here, but...).

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.