January 31, 20215 yr Hello Where is the latest MOD everyone is talking about with the Printer Feature and EFB mounted but not functional yet. On GitHub the stable version is 0.5.2 from January 9th. Also, does everybody experience the hard bouncing on TD of the Airbus? I tried with AP and without and it always bounces two times until it slows down to a manageable speed. My Landing configuration is set up correctly every time (Full Flaps, Spoilers, Speed Brakes and Speed) Best Bill Hagag C:|mydocuments\mypictures\my signature.htm
January 31, 20215 yr The printer and EFB is with the 'developer' version of the mod. I have not experienced the bouncing you describe? John
January 31, 20215 yr Stable version is way behind the development version, especially the development version with the custom fly by wire system. My suggestion, forget the stable version. The dev version with custom fly by wire is just as stable and far more advanced. It is an extremely well behaved aircraft and if you take the time to learn its systems, a great experience. Download the latest installer from the FBW team and let it install the mod for you. https://github.com/flybywiresim/installer Select the green code button and download the zip file. Check it each time you fly, it gets updated daily. Edited January 31, 20215 yr by RaptyrOne GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
January 31, 20215 yr I noticed quite a considerable fps increase with the dev version too. Not sure if that was just a placebo. Tom Wright, UK PPL(A) SEP + Night Rating + IMC/IR(R) Microsoft Flight Simulator 2024 | AMD Ryzen 7 7800X3D | 32GB DDR5 6000MHz RAM | 16GB RTX 4080 Super | 2x 2TB Samsung 990 PRO M.2 | Thrustmaster TCA Airbus Sidestick + Quadrant | Logitech G Saitek Pro Flight Rudder Pedals | WinCTRL Airbus FCU + EFIS + MCDU
January 31, 20215 yr They were mentioning somewhere that they worked on optimization and frame increase. It is definitely an improved experience in the dev version. Haven't tried the FBW version yet... Most of what is said on the Internet may be the same thing they shovel on the regular basis at the local barn.
January 31, 20215 yr 29 minutes ago, Silicus said: They were mentioning somewhere that they worked on optimization and frame increase. It is definitely an improved experience in the dev version. Haven't tried the FBW version yet... The FBW experimental version recently added 'rotate law' which is explained in this video,, https://www.youtube.com/watch?v=iyG6AjCuxMc Quite amazing to me what they (FBW) are adding to this mod! John Edited January 31, 20215 yr by johnh1984
January 31, 20215 yr I’ve been using the custom FBW experimental version and it works great, very stable. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
February 1, 20215 yr 6 hours ago, johnh1984 said: The FBW experimental version recently added 'rotate law' which is explained in this video They have also added a few of the other “Neo” laws and also some of the “protections” such as roll and g-force limits. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
February 1, 20215 yr 11 hours ago, nhagag said: Hello Where is the latest MOD everyone is talking about with the Printer Feature and EFB mounted but not functional yet. On GitHub the stable version is 0.5.2 from January 9th. Also, does everybody experience the hard bouncing on TD of the Airbus? I tried with AP and without and it always bounces two times until it slows down to a manageable speed. My Landing configuration is set up correctly every time (Full Flaps, Spoilers, Speed Brakes and Speed) Best Bill Hagag Get the new updater, it's great and really easy to use, also auto updates. Edited February 1, 20215 yr by SierraHotel AMD Ryzen 7 3700X 4.2 32 gig ram, Nvidia RTX3060 12 gig, Intel 760 SSD M2 NVMe 512 gig, M2NVMe 1Tbt (OS) M2NVMe 2Tbt (MSFS) Crucial MX500 SSD (Backup OS). VR Oculus Quest 2 Windows 11 25H2 YouTube:- https://www.youtube.com/channel/UC96wsF3D_h5GzNNJnuDH3WQ 2k+ Videos & Streams BATC and FSFO FB Group:- https://www.facebook.com/groups/1571953959750565 Flight Sim First Officer (FSFOv6) and SoFly Beta Tester Reality Is For People Who Can't Handle Simulation!
February 1, 20215 yr AMD Ryzen 7 3700X 4.2 32 gig ram, Nvidia RTX3060 12 gig, Intel 760 SSD M2 NVMe 512 gig, M2NVMe 1Tbt (OS) M2NVMe 2Tbt (MSFS) Crucial MX500 SSD (Backup OS). VR Oculus Quest 2 Windows 11 25H2 YouTube:- https://www.youtube.com/channel/UC96wsF3D_h5GzNNJnuDH3WQ 2k+ Videos & Streams BATC and FSFO FB Group:- https://www.facebook.com/groups/1571953959750565 Flight Sim First Officer (FSFOv6) and SoFly Beta Tester Reality Is For People Who Can't Handle Simulation!
Archived
This topic is now archived and is closed to further replies.