June 23, 20214 yr Hello, does anyone else encounter this problem? Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
June 23, 20214 yr Hoovering? It must be a vacuum effect!😁 But yes, it's not unusual to see aircraft or vehicles above or below the ground by a small margin, or even (in the case of static aircraft) bouncing up and down. I'm not into the technicalities of Flight sim design but I think it's mesh issue or something similar. OS: Win11 Home; Mobo: Asus TUF Gaming Z690-Plus WiFi D4; CPU: Intel i5-12400 (Alder Lake) 4.4 GHzRAM: Corsair Vengeance DDR4 64Gb (4x16GB) 3600 MHz; GPU: MSI Radeon RX 5700XT [8GB] SSD: Corsair Force MP510 (for OS); 2x 1TB & 1x 2TB Sabrent Rocket Nvme PCIe 4.0 (one for sim, two for addons)HDD: Seagate 3TB (Data); Seagate 1TB (Programs), ASUS TUF Gaming VG32VQ1B Curved 31.5" monitor, 1440p, 38Mbs ethernet Fulcrum One Yoke, Honeycomb Bravo throttle, Thrustmaster Airbus TCA sidestick & throttle, Logitech Pro pedals, Xbox wireless gamepad (1st gen)
June 23, 20214 yr Author Oh yes ... mean hovering 😉 In this case.all is standard and I encouter this problem on every airport. They do also not bounce, everything is normal, simply they hover a little above the ground Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
June 23, 20214 yr 1 hour ago, guenseli said: does anyone else encounter this problem? My 6 is parked right now in KMIA with AI aircraft alongside and service vehicles. No hovering. Did you install an addon with a mesh ? Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
June 23, 20214 yr Author Just now, Dominique_K said: No hovering. Did you install an addon with a mesh ? Yes, but the pictures above are taken in a region, I do not have meshes active. And, same behave in regions I use meshes Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
June 23, 20214 yr Not at addon airports ? No airport enhancement modules ( Rex, Kinertek etc) ? You have that in pure vanilla MFS ? EDIT If you want to check there I am on parking 189 in KMIA with a heavy along me. You will not see me (MP off) but maybe the 748. Edited June 23, 20214 yr by Dominique_K Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
June 23, 20214 yr i see some hoovering and some of the parked ai do bounce ! ...hope the Starfleet wont do those anti gravity experiments again. Edited June 23, 20214 yr by bumpywindshear
June 23, 20214 yr Author 55 minutes ago, Dominique_K said: EDIT If you want to check there I am on parking 189 in KMIA with a heavy along me. You will not see me (MP off) but maybe the 748. Yes, tested, same in KMIA. And I have absolutely no addons for that region ... means whole south and north america. OK, I know now whats going on: I use the IVAO X-CSL AI Traffic. These also include the car I pictured above (IVAO_ZZZC) So. all IVAO models hover, other traffic, I have disabled. As IVAO isn't currently supporting MSFS as far as I know, I can't complain Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
June 23, 20214 yr yep... same here, ive allready adjusted most of the cg-height`s allready, must have missed the car`s.
June 23, 20214 yr Author 5 hours ago, bumpywindshear said: ive allready adjusted most of the cg-height`s allready, Can you please tell me how to do this Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
June 24, 20214 yr 5 hours ago, Glenn Fitzpatrick said: Bring it on ... LOL, that hoovering AI looks real, this sim’s graphics are superb! GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
June 24, 20214 yr 12 hours ago, guenseli said: Can you please tell me how to do this for the follow me Ranger try: \Community\ivao_x-csl\SimObjects\Airplanes\IVAO_ZZZC\flight_model.cfg -> static_cg_height=1.539863
Archived
This topic is now archived and is closed to further replies.