December 4, 20214 yr So, I made the decision to fully migrate into Win 11, mostly because of the very Linux-friendly this new Windowze system appears to be ... I made a fresh install of Win 11, applied all updates, pushed MFS and went testing... .) All aircraft ( default and the FI Spitfire ) cause CTD as soon as I load a flight ( at LPPT , Live Weather ) and start my takeoff run. The sim crashes instantly... .) Weather, although correct METAR is displayed for the airport and shows "LPPT 040830Z 24007KT 9999 FEW002 BKN010 13/13 Q1027 ", shows no clouds and just a LOT of HAZE .... .) I decided to switch to DX12 Beta and, I was able to start a flight and actually continue without problems, something I was not able to experience with the default DX 11 mode enabled... .) I probably made the error of installing Nvidia's latest driver version which appears to be the cause of problems for most users around here ... .) The Turbo Porter is a total joke, flight dynamics wise.... Are you also experiencing this HAZEOBO haze in Eurupean airports ? Thought it only plagged USA locations ? What about Win 11 going better with DX 12 ? Edited December 4, 20214 yr by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 4, 20214 yr Which Nvidia driver version are you using? There's a known issue with CTDs or freezes being caused by 497.09.
December 4, 20214 yr Author Thx tymk ! That's probably it ! Will try to revert back. Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 4, 20214 yr https://ibb.co/8c37Lfg Known issue. Edited December 4, 20214 yr by Ianrivaldosmith
December 4, 20214 yr 9 minutes ago, jcomm said: Thx tymk ! That's probably it ! Will try to revert back. I'm just startled that you actually went and reinstalled msfs! We are all connected..... To each other, biologically...... To the Earth, chemically...... To the rest of the Universe atomically. Devons rig Intel Core i5 13600K @ 5.1GHz / G.SKILL Trident Z5 RGB Series Ram 64GB / GIGABYTE GeForce RTX 4070 Ti GAMING OC 12G Graphics Card / Sound Blaster Z / Meta Quest 2 VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 1x Samsung SSD 850 EVO 500GB / 2x Samsung SSD 860 EVO 1TB / 1x Samsung - 970 EVO Plus 2TB NVMe / 1x Samsung 980 NVMe 1TB / 2 other regular hd's with up to 10 terabyte capacity / Windows 11 Pro 64-bit / Gigabyte Z790 Aorus Elite AX Motherboard LGA 1700 DDR5
December 4, 20214 yr Author Ok, rolled back to previous Game Ready Nvidia drivers, and no more CTDs 🙂 Also staying with DX12 because, it runs smooth and without CTDs which were affecting my Win 10 install - already something gained from migrating to Win 11 🙂 C'mon Devon, as if you didn't know me already 🙂 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 4, 20214 yr 4 hours ago, jcomm said: So, I made the decision to fully migrate into Win 11, mostly because of the very Linux-friendly this new Windowze system appears to be ... Now that peaked my interest! Have been uninterested in following anything related to W11 as W10 suits my needs perfectly (only MSFS and some other Games from Steam reside on my Windows disk as everything 'serious' is done under Mac Os and Linux). Richard 7950x3d | 32Gb 6000mHz RAM | 8Tb NVme | RTX 4090 | MSFS | P3D | XP12
December 4, 20214 yr Author 24 minutes ago, Swe_Richard said: Now that peaked my interest! Have been uninterested in following anything related to W11 as W10 suits my needs perfectly (only MSFS and some other Games from Steam reside on my Windows disk as everything 'serious' is done under Mac Os and Linux). Get WSL from the Windows Store ( MS version because there are many WSLs around there... ). Win 11 fully supports it, without the "burden" of having to create dual boots or virtualizers.... I bleive we still need to set the Virtualization active in the BIOS though. Mine was already. MFS is at the moment the only flight simulator I have installed with Win 11. .) Was forced to revert back to the previous Nvidia Geeforce drivers for my RTX 3060 Ti because unless I chose DX12 in MFS, I had CTDs with DX11 whenever I started a flight; .) DX12 which caused some stutters in Win 10 runs super smooth / great in Win 11. Actually and although I haven't yet installed the PMDG dc-6, MFS appears more fluid in Win 11 + DX12 mode than ever for me... .) Looking forward to install P3d v5.3 and heck how it goes. For the Airbuses P3D is still my preferred platform. .) Looking fwd to see how XP12 works in Win 11. For me Win 10 is now History 🙂 Edited December 4, 20214 yr by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
Archived
This topic is now archived and is closed to further replies.