April 8, 20224 yr Today I wanted to check if there had been added new airlines to AIG so I clicked Online and no list appeared. The Airlines I already have installed show up at Installed / flightplans. I did not check AIG in the last few months as I was flying a lot. Anyone knows what is going on ? 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
April 8, 20224 yr If you have not run AIG in a while you need to update by running the new installer. The old version cannot update itself.you need to download the new Traffic Manager and Controller. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
April 8, 20224 yr Author Thanks guys 👍 Will do that Will all installed AC remain when installing the updated AIG manger / Controller? Edited April 8, 20224 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
April 8, 20224 yr 15 minutes ago, GSalden said: Thanks guys 👍 Will do that Will all installed AC remain when installing the updated AIG manger / Controller? I was in the same situation some time ago and had to download the new AIG Manager manually. All a/c remained. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
April 8, 20224 yr Author I had 14 airlines that had to be updated. Then I wanted to add several airlines I had not installed yet. WizzAir UK asked my to DL an ac manually but the ac was a P3D model. Later I had the same with another airline where I was asked to DL a 767 and the link pointed to a P3D model again. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
April 8, 20224 yr 3 hours ago, PHLMerc said: Your version is outdated, should be running 1.10.0.95 . Change log shows 1.1.0.104 as latest version. @GSalden, not all of the models are MSFS native. This is why AIG will also cause a CVT file to be created in your community folder by MSFS. Edited April 8, 20224 yr by Phantoms added link, added reply to Gerard James
April 8, 20224 yr Author 49 minutes ago, Phantoms said: Change log shows 1.1.0.104 as latest version. @GSalden, not all of the models are MSFS native. This is why AIG will also cause a CVT file to be created in your community folder by MSFS. Thanks for clearing that up. Do you happen to know if those P3D ac with CVT files are more taxing on the system than native versions ? 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
April 8, 20224 yr 47 minutes ago, GSalden said: Do you happen to know if those P3D ac with CVT files are more taxing on the system than native versions ? The CVT folder is the local cache that MSFS uses when non glTF models are used. They aren't models, but textures. I haven't noticed any difference performance wise. i7-13700KF, 32gb DDR4 3200, RTX 4080, Win 11, MSFS 2024
Archived
This topic is now archived and is closed to further replies.