May 4May 4 11 hours ago, SayAgain said: Sorry, thought I had emailed ... just sent two log files: ++++++++++++++++++++++++ liveries scan automatic starts ++++++++++++++++++++++++++++++++ Automatic AIG scan found folder: 'C:\Users\robai\AppData\Roaming\Microsoft Flight Simulator 2024\Packages\Community\aig-aitraffic-oci' problems with removing previous files: remove: The directory is not empty.: "output\errors" 6067 liveries read from AIG-regcodes.xml 83 don't use titles read 2442 liveries found in C:\Users\robai\AppData\Roaming\Microsoft Flight Simulator 2024\Packages\Community\aig-aitraffic-oci 2442 liveries in output\LiveriesScanned.xml Errors: 13 invalid airline codes, see output\errors\InvalidAirlineCodes.txt 40 incomplete [fltsim.x] sections, see output\errors\IncompleFltsimSections.txt Error files sent also I saw your Log. It should not exit after reading the sanned liveries. Will look into that. From what I understand you are still able to run PSXT after that aborted scan session?
May 4May 4 3 hours ago, SayAgain said: I moved all the offending AI aircraft listed in the .txt files out of the community folder. You really shouldn't do that without knowing the possible side effects. Did you update the layout.json afterwards? Until that is done, the layout.json still thinks those liveries are there. Also most of the ones that show as errors in the IncompleFltsimSections.tx as icao_airline is missing, or it has invalid info will still get used by PSXT when called upon. i7-13700KF, 32gb DDR4 3200, RTX 4080, Win 11, MSFS 2024
May 4May 4 1 hour ago, kiek said: I saw your Log. It should not exit after reading the sanned liveries. Will look into that. From what I understand you are still able to run PSXT after that aborted scan session? Found the culprit, it will be fixed in the next version.
May 4May 4 Author 9 hours ago, kiek said: From what I understand you are still able to run PSXT after that aborted scan session? Yes, just reload PSXT and it works fine. Glad you found possible culprit, much appreciated! Extraordinary claims require extraordinary evidence. - Carl Sagan
May 4May 4 Author 9 hours ago, kiek said: The target % is the number of static parked aircraft you'd like to see Hmmm … ok, since I use RealTraffic service then I should set this to 0%? Or is this just filler AI? So RealTraffic only shows aircraft with transponders active (which would make sense) and there could be several aircraft at an airport without transponders active? 9 hours ago, kiek said: If you want to have more liveries then you should pay attention to the errors and repair them by making changes to aircraft.cfg files, or by informing the creator of the package of the errors. Ok, will do. Extraordinary claims require extraordinary evidence. - Carl Sagan
May 4May 4 2 hours ago, SayAgain said: Hmmm … ok, since I use RealTraffic service then I should set this to 0%? Or is this just filler AI? So RealTraffic only shows aircraft with transponders active (which would make sense) and there could be several aircraft at an airport without transponders active? No, you should not set it to 0%. Static aircraft are parked based on real-time data from the last 24 hours from RealTraffic, and additionally on data in the airport file about who parked where, with which model, on which day and time (see /airports/park_airport.xml). This has nothing to do with transponders. Live aircraft can also park at stands, based on ADS-B data coming from RealTraffic. The target % counts for static+live.
May 4May 4 Author 25 minutes ago, kiek said: The target % counts for static+live. ok, when I have it at 100% (with RealTraffic), I will frequently get aircraft doubled up or waiting for stalls or two aircraft in the same stall or two aircraft that seem taxing inside each other … as in last night at PDX (FYI, when available I do disable all 3rd party static aircraft). My instinct was to reduce the Target % in hope of reducing these duplicate aircraft. When I brought up RealTraffic radar and looked at PDX, there were no duplicate aircraft on taxiway or in a stall. Extraordinary claims require extraordinary evidence. - Carl Sagan
May 4May 4 Are you using FS 2024? If so can you confirm that you have parked traffic turned off under the graphics, advanced settings? i7-13700KF, 32gb DDR4 3200, RTX 4080, Win 11, MSFS 2024
May 5May 5 Author 4 hours ago, Dave_YVR said: Are you using FS 2024? If so can you confirm that you have parked traffic turned off under the graphics, advanced settings? Yes, turned off. 19 hours ago, kiek said: Found the culprit, it will be fixed in the next version. Seems to be behaving same way, shuts down after scan ... made unlisted video here: Extraordinary claims require extraordinary evidence. - Carl Sagan
May 5May 5 10 hours ago, SayAgain said: ok, when I have it at 100% (with RealTraffic), I will frequently get aircraft doubled up or waiting for stalls or two aircraft in the same stall or two aircraft that seem taxing inside each other … as in last night at PDX (FYI, when available I do disable all 3rd party static aircraft). My instinct was to reduce the Target % in hope of reducing these duplicate aircraft. When I brought up RealTraffic radar and looked at PDX, there were no duplicate aircraft on taxiway or in a stall. Have you ticked all 3 collision functions? EDIT : Dupicated aircraft is not normal and should never occur. and are you sure your airport addon has not placed static aircraft too? Edited May 5May 5 by kiek
May 5May 5 1 hour ago, SayAgain said: Seems to be behaving same way, shuts down after scan ... made unlisted video here: Good I did not mention in the Release Notes it was fixed. I was not sure you know. Will look further. Strange thing is that I cannot reproduce it. Edited May 5May 5 by kiek
May 5May 5 Nico, I just installed the latest release at 0650z May 5 and ran the Livery scan just after starting and it completed on my end with NO closing or restart required. I also installed as Admin if that makes any difference. i7-13700KF, 32gb DDR4 3200, RTX 4080, Win 11, MSFS 2024
May 5May 5 20 minutes ago, Dave_YVR said: I also installed as Admin if that makes any difference. No, that is only needed if you have installeld (wrongly) PSXT in Program Files . Edited May 5May 5 by kiek
May 5May 5 1 hour ago, kiek said: Good I did not mention in the Release Notes it was fixed. I was not sure you know. Will look further. Strange thing is that I cannot reproduce it. I believe the issue was in the section that reports the scanned liveries. I’ve made it more robust, so hopefully no exceptions will occur now. Please try version 15.0.4 again after downloading and reinstalling it from my website. By the way, that’s a very clear and crisp screen recording. What video capture software are you using?
May 6May 6 Author 21 hours ago, kiek said: What video capture software are you using? I have a couple of capture methods, external BlackMagic Designs HyperDeck Shuttle 4K Pro and standard nVidia capture using these settings: In this instance I was using nVidia capture. I use the HyperDeck Shuttle to record (ProRes 422 HQ) when doing night flights so as to AVOID getting that nasty night/cloud LSD type of compression that comes with those nVidia codecs. 23 hours ago, kiek said: Have you ticked all 3 collision functions? Yes 23 hours ago, kiek said: are you sure your airport addon has not placed static aircraft too? Yes. Unfortunately after uninstall of PSXT and manual download and install from your website, I get the same issue after a scan of liveries ... shutsdown. Extraordinary claims require extraordinary evidence. - Carl Sagan
Create an account or sign in to comment