Joe Long

Dave, I tried your suggestion, but still had a problem. I'd like to run this by you. I purchased MS2020 in August, and have been flying that sim almost exclusively since. Today, I dusted off "old reliable" (XP11), flew the Zibo from KELP to KIAH, and did not have a single problem with the co-pilot handling coms and changing frequencies. Do you suppose the problem could be with MS2020, or maybe in my installation of the program? Thanks for your continued support for your (I'm certain) happy customers. Joe

Is there a way to disable the Log Book screen that pops up at the conclusion of every flight? To me, it takes away from the immersion factor. And, the darned thing doesn't seem to work anyway. Mine seems to be stuck back in early October. Thank you. Joe

Thanks, Dave. I will give that a try on my next flight. Great support, as usual. Joe

My Copilot Options (Responds To Radio and Change Frequencies) checkmarks keep disabling on their own. I recheck both copilot options, but in a few seconds they disappear again. I have "Respond To Radio Hot Key" and "Responds To Radio Btn" both checked. I have just noticed this since I started flying FS2020. I generally fly the Fly By Wire A320neo. I didn't have the problem on XP11, but I have not flown XP11 for a couple of weeks, so I don't know if the problem exists on that platform as well. Thank you. Joe

Updated to the latest driver, and Nvidea Control Panel opens without problems.

A big "Thanks" to the crew at FBW!

Thanks for the info, I'll download the FBW Dev version right now.

If I start a flight cold and dark in the A320NEO (FBW or default), the auto pilot does not work. I am able to go through all of the pre-takeoff procedures, including taxiing to the active and taking off. But when I engage the auto pilot, the plane veers off to the left or right and I then completely lose control of the aircraft. I tried disabling the AP, and then turning it on again, but no joy. I also removed all of the A320 liveries. (I saw a post that suggested that that might be the reason for the problem.) That didn't work either. However, if I start with the engines running, at the runway threshold, and take off, the auto pilot works beautifully. Has anyone else encountered this problem? I tried using the Repair option, but I'm reluctant to try the Reset option because I don't want to lose my data. Thanks in advance for any help. Joe LaBracio

Thanks, Dave. Great support, as ever.

Hi Dave, I just purchased P3D V5. I'm a long time P2ATC user, running it with X-Plane 11.x Is there an upgrade in the works for P2ATC which will make it compatible with P3D V5? Thanks. Joe LaBracio (an extremely happy P2ATC user)

I heartily second that emotion. Dave and his wonderful program are the best. Joe Long

I couldn't agree more. Dave, you are the absolute best! There is absolutely no better support than the support that you provide to your customers. And, without a doubt, Pilot2ATC is, by far, the finest ATC program in existence. Thank you. Joe

After installing FSW, my Saitek X52 Pro, as well as my Saitek Foot Pedals, worked fine. After a few flights, FSW no longer recognized those peripherals. I can set them up in the Settings section of FSW, but when I go to the flight screen, to begin my flight, no connections. I know that the peripherals are working. I tested them in XP 11 and Aerofly FS2. Anybody else experiencing this condition? Thanks, Joe Long

Thanks, Cryss. That's very generous, and very much appreciated. Eagerly looking forward to the new sim. Joe

Landing Light Switch is still not functioning in Beta 8.

Hello Dave, I don't know if this has been addressed, or if it is something on my end. After creating a flight plan (VFR or IFR), I attempt to export it as a pln file to either FSX:SE or P3Dv3.x. The exported file name appears in my flight plan folder(s), but cannot not be opened by the simulator. Curiously, when I start ASN, and import a flight plan to it, the plans created in P2Av2 and exported to FSX:SE and P3Dv3.x load, and look fine. Thanks, Joe

Hello Dave, When I click on the Nav 1 or Nav 2 STBY frequency in the bottom left of the main P2A window, the keypad displays on the right side. My intention is to change the Nav radio frequency. However, when I click on any of the numbers in the keypad, in order to change the frequency, nothing happens. The numbers that I click on the pad do not appear in the blue selection box above the pad number buttons. There is absolutely no response to my input. This happens on all of the aircraft that I checked. I have been testing P2A v2 with my default Cessna 172, flying both VFR and IFR plans. The problem exists for me whether I am on the ground or in the air. I am still using version 1, and the problem with the Nav radio does not exist there. Thank you, Joe Hello Again Dave, A follow up to my above post: I fired up P2A and FSX:SE, and clicked on the STBY as usual. This time, I used the num keypad on my keyboard to change the frequencies, and discovered that it worked fine. The mouse is still inoperable for that function. Thanks, Joe

The keypad used to change the Nav Radio frequencies does not work on my installation of Pilot2ATC v2. I've tried a number of aircraft, but no success. The problem does not exist on Version 1. Joe

Is it possible that you have the auto pilot on?

I fly the 172 . Its one of my favorite aircraft. Otherwise, all payware, especially the Aerosoft Airbus Extended X, and the Aerosoft Twin Otter X.

E001: 50 E004: 25 E005: 25 Thanks.

Thanks, Ramon, that's a big help.

I am in the process of building a new PC. I have Flight installed, and I added the Hawaiian Island, the Maule, and the Van. My question is, how do I access the DLC that I have purchased, once it's time to reinstall on the new machine? Thanks, Joe

The good old MS stalwart, the Cessna C172.