Everything posted by hitter439
-
Fenix V3 Landing
Hello, Thought I would post my experience with V3+. I have flown the Fenix very regularly for the past 8 months and find V3 to be better / easier to land than V2. What I have noticed is that landing weight now seems more of a factor for determining when / the amount of pitch adjustment during the flare in V3 vs V2. I use a Thrustmaster T16000 joystick, sensitivity for pitch / roll set at -0.15 with a 3% dead zone.
-
Fenix V3 Landing
Hi Benjamin H, I have a TCA joystick also and have set my pitch and roll axis to -0.15 sensitivity with a 3% deadzone. Not sure if this is the "sweet spot" though as I am still floating a bit on landing v3+.
-
Unable to launch MSFS 2024
To update - I started my troubleshooting by trying to determine whether I needed system file repairs, as referenced in cianpars post. I ran the sfc/scannow and DISM commands which did not indicate any issues but they did take a long time to run (I have run these commands before for other reasons). After running these commands I tried to launch MSFS 2024 and was successful. Thank you all very much - I really appreciate everyone's input and have saved all your comments for future troubleshooting should this issue continue to occur.
-
Unable to launch MSFS 2024
Thank you all for your assistance! I really very much appreciate it. I will begin trying the troubleshooting steps you have each suggested. Ryanbatc I also wonder if it is a MSFS server issue vs. something amiss on my end.
-
Unable to launch MSFS 2024
Hello, Unfortunately every so often I am unable to launch MSFS 2024 after signing into XBOX. MSFS 2024 does begin loading but after about 6 or 7 seconds I receive the following error message: "Something went wrong launching your game" Error code: (0x800711c7) Previously, after multiple re-start attempts of MSFS 2024 or re-booting my PC, the sim would eventually launch. I would then have multiple months of no issues. Today, the error message appeared again but re-starts and re-boots have not solved the error. I have also run the XBOX Game Repair Tool and it indicates no issues. I would very much appreciate it if anyone else has also struggled with this error message how you were able to resolve it. Thank you. PS - I have a Dell AW Area-51 PC, Win 11 (up to date), MSFS 2024 Store purchase.
-
Fstl 1.7.0 update
Hi udidwht, Thank you very much for your assistance!
-
Fstl 1.7.0 update
Hello, Please forgive my lack of knowledge, I would like to replace the sim generated AI aircraft models / liveries in MSFS 2024. I currently do not have a Navigraph subscription, nor an ATC program (currently just use MS ATC), so traffic injection is from MSFS 2024. To replace the sim generated AI aircraft with the FSLTL models / liveries do I only install the "FSLTL Traffic Base Models" package in the Community folder and do not need to install the FSLTL Traffic Injector? I currently have the "Parked Aircraft Quantity, Parked Aircraft Variety, Aircraft Quantity and Aircraft Variety" MSFS 2024 in sim settings at Ultra. Would I need to adjust any of these settings? Within the month I plan to re-activate Navigraph and purchase an ATC program, so at that time is it correct that I would then install the FSLTL Traffic Injector package to enable the FSLTL aircraft to be injected via a 3rd party traffic injector? Thank you very much.
-
FSW C414 & BKSQ Baron / Bonanza Pro - 2X sim rate & pop-outs
Hello, I am considering purchasing these GA aircraft, but would appreciate any input beforehand whether the FSW C414 and the BSKQ Baron / Bonanza Pro can - 1) support a 2X sim rate 2) enable gauge "pop-outs" (ability to re-size and move on screen), primarily for GPS units such as the default GTN 530, TDS and PMS GTN 750 / 650 I have looked in the flight manuals available before purchase but did not see any reference to the above. I am currently flying the Fenix A320 and oftentimes utilize the Fenix's capability to operate at a 2X sim rate (in cruise flight) and "pop-out" the PFD and MFD displays - very useful! Thank you.
-
MSFS 2024 Weather reporting
Perfect - Thank you very much for your reply Tuskin38! As regards ATIS, I was referring to the ATIS information broadcast from the arrival airport when approximately 50-60nm from landing.
-
MSFS 2024 Weather reporting
Hello everyone, I would very much appreciate any help regarding how the in sim weather is affected when adjusting the time of day in MSFS 2024 and Simbrief. I have been using MSFS 2024 for approximately 5 months and have just recently begun flying in Europe (which I absolutely love), flying exclusively the Fenix A320. Because of the time difference (I am on the US west coast), I have been pushing back 4-6 hours the MSFS 2024 and Simbrief time of day in order to fly during European daylight hours. When doing so, I have at times been receiving conflicting weather reporting for the departure and arrival airports between MSFS 2024 ATIS, the Fenix EFB weather (METAR), and the MSFS 2024 EFB METAR. Therefore, a couple of questions if I may - 1) Does Simbrief utilize historical weather when generating your flight plan if you push back the departure time from the current UTC time? 2) Does MSFS 2024 utilize historical weather if you push back the sim time from the current UTC time? The biggest issue the above creates is planning for the approach and landing at the arrival airport. Different winds, altimeter settings, temperatures, etc. (sometimes significantly different) between ATIS, the Fenix EFB METAR and the MSFS 2024 EFB METAR make confirming the proper STAR and arrival runway a bit confusing. I haven't yet been able to determine which, if any, of the aforementioned weather sources can be relied upon for the displayed in sim weather. Thank you very much.
-
BATC and AIRAC cycles
Thank you very much Farlis!
-
BATC and AIRAC cycles
Thank you bork. I guess I had not thought about that if you changed the base sim navdata that BATC would be able to recognize and utilize it. A couple of questions though - 1) If at some point one decides to revert back to utilizing the base sim navdata vs. Navigraph navdata is it a simple process to do so? 2) Are the base sim nav charts (i.e. LIDO charts, FAA charts) still available if you override the base sim navdata with Navigraph navdata? (further - if you discontinue Navigraph for a few months and thereby lose Navigraph charts access, are the base sim charts still available to use). Thank you very much.
-
BATC and AIRAC cycles
Thank you everyone for your responses. They are very much appreciated. I will definitely take a look at FsHud and get familiar with its capabilities. "No Navigraph needed for BATC. The base sim navdata is working fine and is updated regularly." My concern (or maybe confusion!) is that although BATC utilizes up to date MSFS 2024 nav data, I believe you must generate your flight plan from SimBrief and not the MSFS 2024 EFB flight planner. SimBrief creates flight plans using data from its' default or your last purchased Navigraph AIRAC cycle, consequently the data used to generate your flight plan is potentially different from the data used by BATC to provide ATC. However, maybe in practice any discrepancies are rare, minor and of little consequence. Thank you all again for your input.
-
BATC and AIRAC cycles
Thank you for your response SierraHotel BSc. BATC, although still in development, does seem like a good alternative to the MSFS 2024 ATC and it is nice to read that you are quite happy using it. I am just trying to understand the financial commitment to effectively utilize BATC over and above the one-time software payment. I have utilized Navigraph previously and find it to be a very good product, but would generally purchase a subscription once every 6-9 months or so. I guess I need to decide whether I will purchase an annual subscription or remain on a 6-9 month schedule and accept the "specific discrepancies".
-
BATC and AIRAC cycles
I am a fairly new user of MSFS 2024 and although lately I have occasionally had a good flight with MSFS ATC (post SU4), more often than not I need to disregard ATC instructions to complete the flight. Consequently, I am considering purchasing BATC. Prior to purchasing, I would like to confirm my understanding as to how BATC utilizes AIRAC data. It appears that to load a flight plan into BATC you must do so via SimBrief. The AIRAC cycle utilized by SimBrief for generating a flight plan is the later of the last AIRAC cycle you purchased from Navigraph or the SimBrief default AIRAC cycle (currently 2503). The Nav data that is utilized by BATC, however, is from MSFS 2024, which appears to be updated each month to the most current AIRAC cycle. Therefore, unless your SimBrief AIRAC cycle coincides with the MSFS 2024 AIRAC cycle, the BATC FAQ indicates, "...you may encounter specific discrepancies". It appears then that in order to utilize BATC without "specific discrepancies", a monthly Navigraph subscription is additionally required. Would that be correct or am I misunderstanding? Thank you very much.
-
MSFS 2024 Land of the Not Quite Right
I purchased MSFS 2024 after SU4 had been released, so I have no frame of reference as to sim behavior prior to SU4. I have definitely experienced parking location - jetway misalignment issues (i.e. when the aircraft spawns on start up the jetway is crossing through the fuselage or, after landing, when arriving at the gate the respective jetway is crossing the parking position line). However, I do not find this to be the case at all airports. I have also experienced the described pushback tug issue, however when flying the Fenix A320 I activate pushback utilizing the Fenix EFB (allows you to pushback straight, left or right) to mitigate this. I also tend to wait a little bit before clicking "ready to fly" to allow objects to load, however it seems the aforementioned can occur regardless.
-
MSFS 2024 Fenix A320 wingviews, Approach phase
Thank you both very much for your replies. Will definitely take a look at ChasePlane.
-
MSFS 2024 Fenix A320 wingviews, Approach phase
Hello, Just purchased the Fenix A320 and am setting up various cockpit, etc. views. Does the A320 come with pre-set wing views or do you need to utilize one or more of the custom camera 0-9 views? If there are pre-set views, can they be mapped to a joystick button? In researching this question I found this post from Aamir from 2022, however it must only pertain to MSFS 2020 as I cannot find the described views in MSFS 2024. Aamir's post - "Hey! We include 6 wingviews/cabin seat views by default, but MSFS orders the cameras in a pretty special way: camera dropdown > internal > instruments > scroll down to find all the included wing/cabin views." Second question - when activating "Approach phase" on the MCDU, does the Fenix A320 then command speeds based upon flap setting, i.e. Flaps up = green dot speed, Flaps 1 = S speed, Flaps 2&3 = F speed, Flaps full = Vapp speed. Previously flew the Toliss A319 in XP11 and it did this fairly well - my first couple of flights in the Fenix I am not quite sure yet... Thank you very much.
-
Nav databases & Simbrief
Hi Farlis, Thank you so much for your explanations and help! It is really very much appreciated. I am considering purchasing the Fenix A320 and the TDSGTNxi for GA so a Navigraph subscription would probably be best for those addons. Very interesting the differences you identified between Jeppesen and LIDO approach charts. Thank you so much again for your knowledge and assistance.
-
Nav databases & Simbrief
Thank you very much Farlis, Tuskin38 and jmdriskell for your responses! Most appreciated! I am finding that certain MSFS addons I would like to purchase most optimally utilize Navigraph data vs MSFS 2024 native data...so that certainly is an important consideration. Will reach out to Navigraph / Simbrief as to why my current Simbrief AIRAC cycle indicates 2403 when my last purchased AIRAC cycle was 2507. If I could ask another question... if I continue the practice of purchasing a Navigraph subscription every 6 months or so, would like to confirm that the nav data used by the simulator will remain as the last purchased Navigraph AIRAC cycle until I either purchase a new AIRAC cycle or restore the then current MSFS 2024 nav data. Further, if my understanding is correct, when the 1 month Navigraph subscription expires the in-sim EFB flight planner will continue to display current LIDO and FAA charts (Jeppesen charts are great but will disappear with an expired subscription, I am fine using the LIDO & FAA charts). Thank you again very much.
-
Nav databases & Simbrief
Hello, I have recently switched to MSFS from XP 11 where I subscribed to Navigraph data approximately every 6 months. I am considering doing the same with MSFS. Before re-subscribing, I would appreciate any comments / feedback regarding the following: 1) Is native MSFS 2024 Nav data inferior to Navigraph's data? My understanding is that MSFS 2024 Nav data is updated fairly regularly. 2) Can MSFS 2024 Nav data be re-selected after utilizing a purchased Navigraph AIRAC cycle? Additionally, assuming that Navigraph data will overwrite the native MSFS nav data, will the LIDO & FAA charts still be available to view in the MSFS 2024 EFB after the Navigraph AIRAC cycle expires? 3) I have not previously used Simbrief, however my understanding was that your Simbrief AIRAC cycle for generating flight plans would coincide with your last purchased Navigraph AIRAC cycle. My last purchased Navigraph AIRAC cycle was 2507 however when signing into SImbrief the current AIRAC cycle available for planning is only 2403. Thank you very much.
-
MSFS 2024 new user questions
Apologies - I posted the above to the wrong forum. Re-posted to the MSFS 2020 / 2024 forum.
-
MSFS 2024 new user questions
Members 35 Posted 59 minutes ago Apologies - mistakenly posted the below to the wrong forum (Tips and Tricks) Hello, I recently began using MSFS 2024, moving from XP11. It has been quite the ongoing learning curve, requiring lots of YT video time, reading of informative posts, etc. A few current questions / issues regarding the sim that I have not been able to completely understand / answer are the following: (My PC specs are Intel Ultra 9 285K, RTX 5090, 64MB RAM, 4TB HD). Thank you very much for any comments / help. 1) How does the sim handle the display of cockpit views? I have assigned many custom camera views to the numeric keyboard and a scrolling POV to the hat button on my T16000M joystick. The sim recognizes these individual view assignments fine, however when in sim and switching from one keyboard view to the other it will often times not display the requested view but instead a random undefined cockpit view or revert to the pre-defined default cockpit view (i.e. the view when you Shift + C into the aircraft). I do not utilize a head tracking device so especially during take-off and landing being able to accurately switch views is important to controlling and maneuvering the aircraft. Additionally, sometimes after selecting a keyboard view I may "scroll" that view a bit by utilizing the POV hat switch, when I then want to return to a pre-defined keyboard view the sim almost always takes me back to the pre-defined default cockpit view. I am using MSFS 2024 completely vanilla, the aircraft I am currently flying to learn the sim are the Piper Dakota, the Cessna 402 and the INI A320N v2. Are the view display anomalies due to these "default" aircraft being buggy, i.e were I to purchase a Black Square, Fenix, etc. type aircraft the issue would disappear....or could this be a MSFS 2024 bug? My PC specs are pretty high-end, I do get high 30s to 80s fps without any FG so my guess is that I am not experiencing a PC performance issue. 2) Airport weather reporting is very inconsistent. I have found oftentimes a significant disparity between weather reported via the in-sim EFB, the INI A320 EFB, ATIS reported weather, and the actual weather encountered when landing. 3) When using external view many times the view appears to be similar to a "fisheye" view from a camera wide angle lens. Is there a sim setting I can adjust to eliminate this? Thank you again very much.
-
MSFS 2024 new user questions
Hello, I recently began using MSFS 2024, moving from XP11. It has been quite the ongoing learning curve, requiring lots of YT video time, reading of informative posts, etc. A few current questions / issues regarding the sim that I have not been able to completely understand / answer are the following: (My PC specs are Intel Ultra 9 285K, RTX 5090, 64MB RAM, 4TB HD). Thank you very much for any comments / help. 1) How does the sim handle the display of cockpit views? I have assigned many custom camera views to the numeric keyboard and a scrolling POV to the hat button on my T16000M joystick. The sim recognizes these individual view assignments fine, however when in sim and switching from one keyboard view to the other it will often times not display the requested view but instead a random undefined cockpit view or revert to the pre-defined default cockpit view (i.e. the view when you Shift + C into the aircraft). I do not utilize a head tracking device so especially during take-off and landing being able to accurately switch views is important to controlling and maneuvering the aircraft. Additionally, sometimes after selecting a keyboard view I may "scroll" that view a bit by utilizing the POV hat switch, when I then want to return to a pre-defined keyboard view the sim almost always takes me back to the pre-defined default cockpit view. I am using MSFS 2024 completely vanilla, the aircraft I am currently flying to learn the sim are the Piper Dakota, the Cessna 402 and the INI A320N v2. Are the view display anomalies due to these "default" aircraft being buggy, i.e were I to purchase a Black Square, Fenix, etc. type aircraft the issue would disappear....or could this be a MSFS 2024 bug? My PC specs are pretty high-end, I do get high 30s to 80s fps without any FG so my guess is that I am not experiencing a PC performance issue. 2) Airport weather reporting is very inconsistent. I have found oftentimes a significant disparity between weather reported via the in-sim EFB, the INI A320 EFB, ATIS reported weather, and the actual weather encountered when landing. 3) When using external view many times the view appears to be similar to a "fisheye" view from a camera wide angle lens. Is there a sim setting I can adjust to eliminate this? Thank you again very much.
-
Unable to launch MSFS 2024
Thank you all so very much for your responses. All of your suggestions were extremely helpful and acted upon. The suggestion by Flameout01 to "open Task Manager and look for gamingservices.exe" has appeared to ultimately solve the problem! I did find 2 instances of gamingservices.exe running and told Task Manager to "End Task" on both of them. After doing so, MSFS 2024 is launching correctly. Hopefully this launch issue will not re-occur. Thank you all again so much for taking the time to help me. Looking forward now to getting the simulator set-up and enjoying it as all of you are.