KevinW

Just to confirm, I'm using AIG Manager v1.1.0.70 and AIG Traffic Controller v0.5.0.19. Just descending now approaching LEBL and can confirm also there's plenty of AI traffic in the sky here.

Yes, using Navigraph AIRAC cycle 2112.

Hi No problem here using the MSFS beta v1.21.18.0 and AIG (offline) traffic (MSFS real time traffic disabled) - did a flight this morning from LFPG to LPPT and saw plenty of moving AI on the ground and in the air. Currently setting up a flight from LPPT to LEBL with the FBW A20N and seeing plenty of AI aircraft (Ryanair, TAP, Vueling) taxiing out to depart LPPT, and also landing and taxiing to stands.

Not an FBW320 problem - just completed an IFR flight from Bristol to Zurich and no problems at all with ATC (incluiding when I assigned ATC comms to the copilot during approach). This was with Navigraph AIRAC cycle 2111 rev.4 installed.

Are you flying with "AI Offline" aviation traffic enabled? I also had this same CTD issue (due to CoherentUIGT.dll) with 5 consecutive flights using the A32NX mod over 3 days from 23rd March - I tried numerous reported fixes (including a complete MSFS reinstall and removing the Navigraph AIRAC) but the only one that worked for me was unselecting "AI Offline" traffic. SInce then, I've sucessfully completed 6 flights (all in Europe - ranging from 300 nm out to 1,500nm) with the A32NX latest experimental version and the latest Navigraph AIRAC (installed using the same beta installer I was using when I was getting the CTDs) and aviation traffic set to "OFF"). "Real Time Online" traffic also seems OK (2 flights completed so far with this in Europe using the latest A32NX experimental version). But as soon as I switched "Offline AI" back on for a flight this morning with A32NX, I got a CTD again about 65 minutes into the flight. So, I'm back to either flying the A32NX with AI set to "OFF" or "Real Time Online" only I only see this issue with the A32NX mod - I have completed several flights OK during this time using the WT CJ4 with "AI Offline" enabled.

Agree with Ryan - using the latest v0.10.3 beta on a flight just completed, the FMS calculated Vref at 100 knots but final approach speed was about 95 knots for the AOA to be solidly in the green.

Hello The latest GTN750 installer (v2.5.28.0) - from an e-commerce file downloaded this afternoon (10th Feb 2021) from the RealityXP store - is still not allowing correct installation of the FSIM GTN750. When the installer setup file is run (using the installer's default installation paths only and with Windows Defender and Firewall both turned off), the installer throws up the following error message when trying to install the Garmin Trainer software - see screenshot: Clicking on the OK button in this dialog box allows the installation to proceed to apparent completion, installing trainer version 6.62.4 in the process. But, when i go into P3D and select an aircraft configured with the RealityXP gauge, the gauge start-up screen indicates that no databases are installed - see screenshot below. Just to confirm - Windows Defender and the Windows Firewall are both turned off for the whole RealityXP installation process and no other a/v or firewall software is on this computer. As such, it looks like the latest rxpGTN-FSIM-Setup.exe is bugged! Is there a workaround for this, or is a new installer required? regards

Hi I'm trying to reinstall my RXP GTN750 into a fresh re-installation of P3D v4.5 - but I have a problem with downloading the required GarminTrainerSetup file. I am using the latest RXP GTN750 installer (v.2.5.28.0) downloaded from the RXP website via the latest F1 ecommerce software. The installer runs OK initially but then stops part way through, when it is trying to download additional files and I get the following dialog box message - "Download failed: file not found (404). Check your connection and 'Retry' to try downloading the files again, or click 'Cancel' to terminate setup." When I close that dialog box and click on the 'Details' dialog box on the 'Downloading additional files' screen of the RXP GTN installer, the following information is provided - "File: GarminTrainerSetup_3000.exe Status: File not found (404)." I've confirmed that I'm connected to the internet and clicked on 'Retry' several times as suggested by the "Download failed" message - each time, I get the same "Download failed" message again. I've also tried manually downloading the GarminTrainerSetup_3000.exe file from the links given in the information page of the RXP GTN750 installer - clicking on the link supplied there for the trainer also returns a "File not found (404)" message. Can anyone help with resolving this? FYI - if it helps, I'm running Windows 10 Home 64-bit, with only standard Windows 10 a/v and firewall. Regards

Hi Just wanted to add my sincere thanks to all who involved with this mod - excellent work! It's fantastic to see the improved FLC and decent FADEC and VNAV implemented in the CJ4. Done 3 different flights in Europe with it now (all with IFR plans generated in the Navigraph app and then loaded into the default MSFS flight planner) and everything worked just as described in the videos. Certainly recommend watching the videos, and also double-checking the flightplan to make sure any discontinuities have been removed. No CTDs or other glitches experienced and captured the GS just fine on each occasion. The only points I identified are the same 3 that have already been raised and answered earlier in this thread (i.e. yaw damper indication, speed bug outside of FLC and the FP sync ON/OFF button). No problems here either with the flightplan syncing to the MSFS ATC (I'm using v1.3 of the European ATC phraseology mod) - ATC worked correctly on all 3 flights (as well as the MSFS ATC can in its current state, anyway) . For info. the 3 flights were each conducted using the unreal weather live metar mod (v1.7) and with the working title G3000 mod (v0.32) and tbm930 impovement mod (v0.5.5) also installed in the MSFS community folder. Looking forward to the next great installment of the CJ4 mod.

No problem here with the Working Titlle mod (v.0.71) for the CJ4 running on MSFS 1.11.6.0. Did 2 flights yesterday and 2 today after applying patch #7 - all were into different airports (LEPA, LGAV, LIPZ and LLBG) and the AP captured the ILS localiser and GS just fine in all 4 flights (and in the flight today into LLBG, this was after switching the AP from HDG mode to APPR mode, following a change in the ATIS-advised runway for landing due to weather).

Hi Jorge Love this mod - it has made flying the Phenom 300 a real pleasure (which is always a challenge with standard Carenado aircraft)! Great respect to you for coming up with the mod and implementing it so well. I've done about 15 flights with the mod now. One oddity I have noticed (albeit it doesn't significantly detract from my enjoyment of the mod) is that sometimes when I'm flying IFR with a loaded flight plan (.pln format, generated using littlenavmap) the inflight fuel, time and distance statistics on the fuel EIS page of the MFD don't show any values (all read 0). It doesn't happen all the time - just occasionally. I will do some repeat flights with some saved flightplans over the next few weeks to see if it's a flightplan-specific issue, or just a random occurrence - I'll let you know what happens. All other mod functions work consistently and effectively as far as I can see. FYI - I'm running the latest P3D v4.5 Academic (v4.5.14.34698) on Windows 10 Home v.2004, with the Phenom 300 v2.1 and v2.07 (build 7.05) of your mod. Kind regards Kevin.

Hi Denis I seem to recall having this issue with the v2.1 version of the Phenom 300 some time back (before I too switched to the rxp GTN750 mod). If I remember rightly, what worked for me was opening the 2D MFD panel, clicking on the MFD enter button in that, then closing the 2D MFD panel again. After that clicking on that button in the VC MFD (which still showed the opening screen) brought up the MFD map screen as per normal. Hope this works for you too. Kind regards Kevin

Hi Anyone have Whamil77's P3Dv4.4 patch for his C90B mod and willing to share? Please let me know and I'll send pm. Many thanks. Kevin

Would love to try this mod - PM sent. Thanks.

Hi all I would very much like a copy of this patch for Bill's excellent mod for the C90B, so I can get the engine start sequence working properly in P3D v4.5. If anyone who has it is willing to share it, please let me know and I will pm you. Many thanks. Kind regards Kevin