Japo32

same... but I don't have shadows in nonHD in the Airbus extended.... but also into the A2A cherokee in HD one.. but YES in NonHD The only I have (I tryed) is the default cessna in both.. but it is strange because I cannot see the yoke shadow in the pannel..... I have seen that there is an "HD applies to" Airlines (30), Biz Jets (0) and All (0)... what is that for?

Hello! Searching for information about Youtube Monetize of FSX, I saw how Microsoft didn't allow this in 2012 in all Microsoft flight simulator versions. Now that Dovetail Games has bought the rights to distribute and sell FSX again, I searched and saw this page: http://steamcommunity.com/app/24010/discussions/6/540743756944093806/ They allow the monetize of their producs, so I supposed maybe FSX is included also. Wrote an email yesterday to them.. but still not reply (maybe too soon). Does anyone know something about the monetize in youtube (or other video platforms) now with Dovetail Games? Thanks!

Yes.. that is something I don't like.. but I think is a problem of FSX illumination. Whatever the number of clouds you have the illumination in ground will be the same as it would be perfectly clear. I think P3D v2 does this better.

I understand now the work in Fiber. Would be nice to have an option to just let Fiber to make your graphics better or leave them as we have in config and return to the locked maximun ones.... because for me I like the way they are when they are smooth at 34fps locked.. and would preffer to have those 34fps instead of 23fps and better graphics (that barelly cannot see. Just you told me, I believe you) Thanks!

My changes are hot. So I was loading FSX without loading Fiber, and then inside FSX while running, loaded Fiber. Closed, and loaded again. I hope it is a bug, because I would like to have it always behind to ensure good fps all the time.

One thing I noticed today... I just was testing some new configuration to try in ASN... loaded the default cessna had 34fps that is my limit set. Press Y and put up in the sky the cessna to just see how ASN behaves... and still I have 34fps... Ok I shouldn't need Fiber.. but I start it to see what happens. It lower the fps to my 23 fps minimun target. Close Fiber.. and the fps are back to 34... Open again and 23fps... why that drop of fps when FSX can run at 34 without any problem? When I have low fps without Fiber, it raises me the fps to the minimun more or less... but why it drop me the performance when everything is good? Have the latest version. 34 limit high and 23fps limit minimum in fiber. Thanks!

One question... if we purchase now for FSX, when there is a P3D v2 version, you would give the FSX costumers for free o would you make them spend some money on the P3D version? (or a little ammount with discount)? Just to know clearly. 40$ is not cheap. Thanks!

I tried in dx10 fixer.. and worked good. The plane was the pmdg ngx... complex enough? I believe yes.

I have two questions: 1.Where is an official forum for support in case of buying 2. When the graphics are set to lower stage to have better fps.. if we safe that area and go to a better fps one, the graphics will go up again.. or will remain low? Thanks!

True.. and for me it is good if it is only in those areas where I had bad fps (bad performance airports) If it returns to its natural good looking I have outside those areas then no problem for having some blur textures around some of my bad fps airports to have smooth flying. I think I am going to buy it.. but I want to hear also some feedback. There is no forum in the vendor page... and I am not rush to fly again... so will wait to read a little.

Tried! and it worked! I put the PMDG 737NGX in Barajas Aerosoft airport.. so I had in cockpit 16-19fps Put the program hot loading and I set 29fps minimum where I have 30 maximun in FSX. It boosted FPS about 24-25fps in BARAJAS!!! Then toke off and I was having 20-25fps with all the city, Orbx global.. ASN.. Dx10. Then a msg appeared about 1minute left for fiber to turn off. It turned off and the frames becamed to 14 or so... in the middle of the air and the city... Switched again (we have 5 oportunities of 5minutes each I think) and it boosted the fps up again to 25-30fps... Of course when it boost up, it blur some textures, reduce the autogen.. etc.. but I have smooth flying.. I hope (didn't make more test) if FSX naturaly can have more than 30fps it would make again up all the autogen, sharp textures etc... preparing my credit card...

I am trying to find it in settings views... but don't see the 2-D 3-D option... do I miss something?

Do you have the nod32 virus or firewall? try to deactivate it....

That is amazing!

Ok.. after 3 flights with no issues.. I believe MAYBE I found the problem. Nod32. Maybe the firewall or the realtime scanning of files is affecting the connection with the MCP. I tried disabling it for my flights and for now I had no issue at all.. which doesn't mean it is the culprit. If I find something more I will post in case other has same issue to help him resolve in future.

One different thing I noticed in P3D v2 with FSX is that setting in the console to show Log FSX controls or Log VRi events.. it doesn't show anything in P3D v2 but yes in FSX. with the A2A P51 civ, I have in Log FSX controls option this in FSX constantly [C] Control: 66046 - 0 GYRO_DRIFT_SET [C] Control: 66442 - 6146 COM2_RADIO_SET in P3Dv2 nothing. It is clear.. Maybe that repeat function is breaking it sometimes.. BUT as I said.. I don't know anything of any repeat function, and both lua scrips are the same. And as said also it seems that the repeat function doesn't exist in the combo2.. so I don't know now what to think (and I am not going to reinstall everything again... :(( )

If I had space to build my own cockpit.....

Thanks for the replies! Well.. as said, everytime I press the "reload Lua engine" it reloads the lua engine.. and the reload start green label appears in FSX but the McP combo2 stays the same. Frozen. And I think it has not to be with Simconnect because I have all my joysticks mapped though FSUIPC and I don't loose any funcionability. As said in the drivers.. yes.. it is in the middle.. They affected one of them Totally to the funcionability of the MCP combo with the USB driver.. BUT the SAI one made the Mcp combo work.. sometimes and not work.. going and comming, going and comming. For that I start the think is some kind of driver or issue inside my computer.

Well.. that is when you say... For real experience.. go to the real ones. Nice Bulb Simulator!! I like it! https://www.youtube.com/watch?v=xY6tLthpwxE&list=PL3x99EL3BXmDX107-P6CTGldvx72geh1P&index=1 :ph34r:

The Maddog 2010 maybe? Don't know other as deep as PMDG in failure simulation...

Yes.. I thought about the USB not stable.. but I never hear a ding-dong of desconnection.. and also I changed it to another USB port to same result. Could be.. but don't know. In the pass I had problems with the MCP and some drivers. 2 of them. the Aida64, that I had to switchoff one options to clear though the MCP interaction.. and a Sai drivers that was interacting with the MCP also. I think.. maybe I have that issue (a driver or service)... but in this case is it very difficult to find because the error ocurs in no time predicted (others was seen inmediatelly). I follow the steps to clear the "USB Serial Converter" that was listed in usbdeview program.. but was the MCP combo2 one.. so it installed again. Is there any program to deactivate services once FSX is opened? I had Alacrity but it doesn't work in 64bits.. and I don't find anything like that in internet.

Yes... my framerate is locked at 30.... About the repeat function.. where I can see it? because in the assign functions in each button (in the graphic UI) I don't see any Repeat function anywhere... Only I see the function itself called by the press of the button. The only place I see a repeat, is in the joystick area, but there I don't touch anything. Like this image... I don't see any repeat there.. http://2.bp.blogspot.com/-jYQlNOm-w9U/TelE5IBAztI/AAAAAAAABQE/EV0klikUPCI/s1600/lindascreen1.jpg The problem is once the mcp is locked not responding.. there is no way making it work again but restart fsx. Imagine that it is not fun when the middle of a flight. If I were able to reset it that easily then it would great... but not. Never recovers.

So there is no sense to test the annunciators lights at the beginning. A shame.. I thought the plane was as deep simulated as that.

noone knows?

edit: sorry for the 3 posts created with the same question.. because failure of internet... sorry Hello! Following the startup procedures we have to check the function of all lamp annunciators before startup. My question is simple. Does the NGX simulates a lamp annunciator failure in service based failures? Any kind of random failure can occur to any annunciator lamp? Is it programmed to maybe happen? I am not meaning to trigger it.. Just the posibility so maybe we have a Low pressure Fuel pump... but the lamp is damaged and it would illuminate so we won't be able to know what is happening (maybe only would illuminate the "fuel" warning in the front annunciators panel? Thanks!