J. Eberhardt

Hi, i always use ProATC and GSX for parking. About 10nm before landing i look for a free gate on the Airport from the ProAtc Map, open the GSX Menu and report this to GSX so that would be done already and I do not need to worry about it anymore. Also i enter this in Efb2 for the taxiway, so after landing the map on Efb2 shows me automatically the taxiway to the gate, helpful on big airports. Of course, in the event of heavy traffic, it may happen that the gate is now occupied by another aircraft, but in my settings this has never happened to me before.

The passengers bus is ok so, but the truck for the crew are still terminators available, could you also adjust that?

For a permanent solution The size of the GSX window is controlled by a "SIMCONNECT_WINDOW" entry in the missionpanels.cfg file located in the "\gauges" folder. Open missionpanels.cfg with notepad and look for the following entry: [Window12] size_mm = 375,250 position = 4 ; Middle Of Screen visible = 0 ident = SIMCONNECT_WINDOW scaleform_file = MenuWindow ; Use the generic menu window scaleform content scaleform_instance_name = SimConnectWindow ; Provide a unique instance name after the size_mm line, add the following line where X.XX (horizontal) and Y.YY (vertical) are a percentage of the main P3D window from 0.00 (0%) to 0.99 (99%) window_size = X.XX, Y.YY The "window_size = 0.50, 0.50" works for me. Regards

Hi Ben, have you already got a reply ? Your last post is just the same as it is with me - as I said, after i pressed die Exec Button i quickly press the nav button, then it works again.

I know that, in this case quickly i press the nav Button, then it returns, but maybe there is another way to prevent this?

Various settings i already tried, unfortunately not promising. My actual AA is 4xMsaa. Actually, I would be satisfied, , if RealLight and TrueGlass could be switched on separately. Without RL and with DL the lights are fine, but you have not any TrueGlass features :-( Deactivate RealLight by renaming or uninstall is not satisfactory because at night the Overhead panel stays dark...

Are there already any new findings on the problem with the frames and dynamic lights ? As soon as I switched the landing and the noise lights on, my frames drop sometimes over 20 fps down (mainly at night) on the follwing system: i7600k@4.5, 16GB, GTX1070 (8GB), Win10 P3d 4.1 (but also happens at 4.2), Dyanmic lights on In the md load manager the panel and the true glass/real light settings are on 2048, at 1024, unfortunately, nothing is recognizable. Without turning on the lights (noise and landing lights), it runs always smoothly. The funny thing is that other users with almost the same system and similar settings have no problems with the lights. Currently only option is to turn off DL, or turn off true glass/real light. With DL and RealLight, it is also tolerable when the noise light only switch to dim and the landing lights stay off (only 10 fps drop down). Regards Jens

@AnkH I also have this small "moving" shadow spots. When i sit in the plane on the ground and look out of the window and moving my head, the shadows moves with the view direction. This shadows appear depending on the sunshine and clouds, so are not always present. Had tested with Pta and standard shaders, the difference is only in the brightness of the shadow spots. I'm afraid this is also related to the shadow bug of p3d v4. Currently my work around is, the brightness of die cloud shadows set a bit brighter, so it does not get too much... Regards Jens

Hi, I have developed a small freeware tool, EzdokEx, which allows you, automatically assign the world cameras of Ezdok to a certain profile. Is a Hotkey assigned to this profile, it is possible, to switch always to the nearest world camera or a standard airport camera (depending on the aircraft position) with one key. For example, you have create different airport tower cameras, you can comfortably switch with one key to the nearest airport camera and observe your approach from outside. If a world camera has not been created for an airport, a "standard camera" can do this job. So it is not absolutely necessary, to create a camera profile for each airport. Regards Jens Download

Alternative make a copy from your ezdcam File in user\appdata\roaming\eca\db2\saved_profiles\p3d and rename it to the livery name. Only the name in the ezdok headline does not fit

Hi, i'm also use PFPX, Pro-ATC, EFB, ASN, Topcat, PMDG.. My rough steps: - before press calculate button in pfpx, i'm edit the flightplan (press the edit button) - remove the sid/star (set to --) and press the save button - now i'm calculate and release the flightplan and export it to Pro-ATC, EFB and PMDG format - import the flightplan into Pro-ATC, EFB and at least PMDG CDU - After activate the flightplan in EFB, ASN get automatically the flightplan, too. - after i get clearance from ATC, select the given runway and SID in the PMDG CDU and the EFB Regards Jens

Haze borders: Hifisim forum

Works not for me, as usual from FL300 down to FL270 appears the haze border @Nooon Have you tried it too ?

@GSalden Multi Layer and VolFog enabled ?

Hm, after update from 3.1 to 3.3.5 this haze borders is now more intense on my system. Under 3.1 i could suppress it (less or more) with max upper visible = 125 in ASN (open beta 5), but in the actual release does not work. My Settings: MultiLayer on, min visibility = 0, min upper vis = 65, max upper vis = 125 (ASN), vol Fog P3d on (P3d) Can tell me how you got it off ? Regards Jens