Pablo Vazquez

I seriously doubt the 747 will be released this year... So not holding my breath!!

Hey guys... I have been a flight attendant first for US Airways (14 years) and now for American since the merger. Normally, they will let you see the flight deck after plane has arrived at the destination as people are walking out. They normally don't allow flight deck visit durin pre flight as they are pretty busy in there and also for security reasons. You can ask but not sure if you can see it during boarding. Maybe after arrival in SFO. That's just my two cents... Regards, Pablo Vazquez

Hey Guys, Well, kind of feel like and idiot... but I figured it out... The in-sim date was outside of the effective dates of the data. Don't know why it was showing a September date. I went to the settings and checked the "Use system time for Default Scenario"... It's all fixed now!!! Thank you for the help!!! :-) Regards, Pablo Vazquez *** You may close this thread now ***

Hey Guys, I am pretty sure I have it set to use system time (computer day and time) then I update the time for my flight... not the date... BUT... Let me double check that. I will report as soon as I check it.

Hi Kyle, Thank you for your quick reply. I do have a full year subscription with Navigraph and update my Data as soon as it's available. By the way, I looked around the forum and couldn't find anything. Maybe I didn't look hard enough. My apologies!! :-) So what do I do?... I just wait for the next one to be published? Regards, Pablo Vazquez

Hello, I don't know why this is but my 777 FMC says "NAV DATA OUT OF DATE". This is with both the -200 and -300 aircraft. I know it isn't because it shows NAV DATA: AIRAC-1603 and Active: MAR03MAR30/16. I am using Navigraph FMS Data Manager to update my NAV DATA. My PMDG 737 and my Aerosoft Airbuses are fine... it's just the 777. Anyone knows what's causing this problem? Should I ignore it? Thank you. Regards, Pablo Vazquez

By the way Carlito777... I followed these instructions and it worked beautifully for me. I never uninstalled the client at all. I ran the setup as Administrator and it ran all the applications. It took about 5 minutes from begining to end. I just finished another flight with the 773 from JFK to London (AA100) and the flight was flawless. Just an FYI... :-) ""Updating Prepar3D v3 When minor updates are released for Prepar3D v3, there are now two options available to update Prepar3D v3. The recommended method is simply updating using the Client installer. This is the quickest and least error prone. You can also update by doing a complete uninstall and reinstall of the entire application, but often that is not necessary or desired. Updating just the Prepar3D Client is a new feature for Prepar3D v3. It allows users to download only the new parts of Prepar3D, rather than re-downloading the whole application. Note: You must have already installed the full Prepar3D application in order to update just the client.""

Maybe I was lucky or something like that but I have done about 5 flights on the 737 and two on the 777 and have NOT HAD A SINGLE PROBLEM!!! So for me it's working flawlessly!!!

Hey guys, Just my two cents here.... I updated my P3D to v3.2 yesterday and all is working perfectly. I never uninstalled anything. All I did was to download the new installer and run it as Administrator... The instructions says that uninstalling is optional. I tried it without uninstalling my v3.1 or any add-ons. It took about 5 minutes to install it and after that I tried a flight from KMIA to KDFW on the 737 and a return flight using the 777. I did not have any problems at all. The only thing I had to do was to do a new install of the FSDT Addon Manager to update the BGLMANX.DLL file so my airports can work. So far I have not had any problems or issues with my 777 or 737 or airports. Again... Just my two cents. Thanks, Pablo

I'm 48 years old... turning 49 in March... Will this plane be released before I turn 50?.. LOL!! :-) Anxiously waiting for this baby to be released!! Regards, Pablo Vazquez

Wow.. Amazing. Thank you for the update.

Hello Robert and Ryan, Thank you for your help. I just got off the phone with Jetliner Systems and Greg helped me troubleshoot my system. It looks like there was a problem with my registry and some P3D v2.5 files that were left behind when I uninstalled it, so he cleaned my registry and removed those files. He also updated the FSUIPC with the newest one that was released today (05OCT). I just finished testing two flights and NO problems at all. It looks like my issue was fixed. I will keep you updated and let you know if I have any other problems. Thank you again for your help. You are amazing. Take care and have a great week! Regards, Pablo

Hello Ryan, Here is the information from my latest Fatal Error. Let me know if you need anything else. Thank you, Pablo Problem signature: Problem Event Name: APPCRASH Application Name: Prepar3D.exe Application Version: 3.0.10.14945 Application Timestamp: 560b4abe Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.18939 Fault Module Timestamp: 55afd843 Exception Code: c0000005 Exception Offset: 0002e3c6 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: LCID: 1033

Hello Robert, It looks like all is working fine with both airplanes (777 & 737) and P3DV3 but I am getting the famous "A Fatal Error Occurred. Windows is checking for a solution to the problem." when I close my P3D. I still think is has something to do with ASN or FSUIPC... Not sure. Any thoughts? Pablo

Hello Mr. Randazzo, Thank you for taking the time to respond to my posting. I wasn't sure if I did something wrong installing my P3D V3 and my PMDG products. I will do as you suggested to turn off the error logging. I did have the V2.5 installed in my computer and both my 777 and 737 worked flawlessly. I also have FSX installed and both my planes work great there too. One thing I have noticed is a "Fatal error" that happened twice When I try to run my P3D. Not sure if it's my ASN or not. Still trying to figure that one out. Anyhow, I will submit a ticket through the PMDG website if I have any other problems. Again, thank you for the response. Kind regards, Pablo Vazquez

Hello Everyone, I reinstalled my P3D V3 today then installed my B777 and didn't ask me for the activation kep. Not sure what I did wrong. I read the readme file in the PMDG B777 folder and followed the instructions to run the SimConnect and still didn't ask me. Any one knows what I'm doing wrong? Also, as soon as I close my P3D, I get an error log. Here is the info inside the folder. I have the feeling it has something to do with my registration key. Any help will be greatly appreciated. Regards, Pablo Vazquez [error.0] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.1] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.2] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.3] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　 [error.4] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.5] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.6] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.7] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　 [error.8] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.9] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.10] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.11] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　 [error.12] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.13] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.14] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.15] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　 [error.16] error=file "xPMDG777_SHUTDOWN1.wav" not found [error.17] error=file "xPMDG777_SHUTDOWN2.wav" not found [error.18] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.19] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.20] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.21] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　 [error.22] error=Key values exist outside of a section: File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Key: [error.23] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit21 Key:　 [error.24] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit22 Key:　 [error.25] error=Found Duplicate Key Name File:C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 777-200LR\panel\panel.cfg Section:VCockpit29 Key:　

Gorgeous... Looking forward to flying this beautiful plane!!

Avwriter, Thank you for your reply. I uninstall the aircraft as pre the instructions for installing updates. Removed all references for the aircraft and did a fresh install of the latest update. I submitted a ticket through the PMDG support. Have been in touch with Ryan. He is helping me figure out why it's doing that. Thank you again for the reply. Kind regards, Pablo

downscc, Thank you for your reply. I removed both the NGX on 777 through the control panel, then I removed all references of both aircraft as described in the instructions that was posted here in the forums.I then went to my e-commerce page of PMDG and downloaded both the 737 and 777 aircraft again. Then I installed both of them. I will look and see if I can find anything in the event viewer from all the crashes that I had earlier today.

Hello, I am posting this because not sure if anyone else is having the same problem or not but I just installed the new NGX update and the latest Navigraph AIRAC. Now My FSX is freezing then CTD a few seconds later. Not sure what it is. Does anyone know what is going on now or how to fix this? Tried to do a flight with both the NGX and 777 and still crashing after take off. I have not had any problems in the past with any of my PMDG products but now I am. Any help will be appreciated. Thank you, Pablo Vazquez Sorry for the double posting... don't know how to delete this one. Thank you, Pablo Vazquez

Hello, I am posting this because not sure if anyone else is having the same problem or not but I just installed the new NGX update and the latest Navigraph AIRAC. Now My FSX is freezing then CTD a few seconds later. Not sure what it is. Does anyone know what is going on now or how to fix this? Tried to do a flight with both the NGX and 777 and still crashing after take off. I have not had any problems in the past with any of my PMDG products but now I am. Any help will be appreciated. Thank you, Pablo Vazquez

Update is ready for download now. Just go to your eCommerce account and download it from there!!

Jeffreymg... They are testing the update Right now.... Just wait for further instructions when the update is ready to download.

They are actually testing the update in the OC... Just wait for further instructions when ready to download

THIS IS THE REASON WHY I DONT POST ANYTHING..... Thank you for making me feel stupid AVSIM..... How do I delete this whole stupid topic??????